Influence of concentration distribution of hydrogen in air on measured flammability limits

There is a clear difference between exiting data on the measured flammability limits of hydrogen-air mixture. The non-uniformity of concentration distribution of hydrogen in air is a contributor to deviations of the upper flammability limit (UFL) and the lower flammability limit (LFL) measured in different experiments. This paper presents a numerical model to simulate the gas mixing process from start to stability, to predict the concentration distribution, and to research the influence of concentration distribution of hydrogen in air on measured UFLs and LFLs. The commercial software package Fluent was used to carry out the numerical simulation for the concentration distribution of hydrogen in air in the vessels with length-to-diameter ratios (L: D) of 1:1, 3:1, 5:1 and 7:1 respectively. Based on the numerical simulation and analysis, the influence of concentration distribution on measured flammability limits was demonstrated for hydrogen in air in the vessel. It is found that the deviations of measured flammability limits of hydrogen in air are the minimum in the vessel with length-to-diameter ratio of 1:1, and augment with the augmentation of vessel length-to-diameter ratio. Moreover, it is presented that the deviations of measured flammability limits of hydrogen in the center of the vessel are lower than that in the top and the bottom.     

Development of the Spatial Rainfall Generator (SRGEN) for the Agricultural Policy/Environmental Extender Model

Accurate spatial representation of climatic patterns is often a challenge in modeling biophysical processes at the watershed scale, especially where the representation of a spatial gradient in rainfall is not sufficiently captured by the number of weather stations. The spatial rainfall generator (SRGEN) is developed as an extension of the “weather generator” (WXGEN), a component of the Agricultural Policy/Environmental eXtender (APEX) model. SRGEN generates spatially distributed daily rainfall using monthly weather statistics available at multiple locations in a watershed. The spatial rainfall generator as incorporated in APEX is tested on the Cowhouse watershed (1,178 km²) in central Texas. The watershed presented a significant spatial rainfall gradient of 2.9 mm/km in the lateral (north‐south) directions based on four rainfall gages. A comparative analysis between SRGEN and WXGEN indicates that SRGEN performs well (PBIAS = 2.40%). Good results were obtained from APEX for streamflow (NSE = 0.99, PBIAS = 8.34%) and NO₃‐N and soluble P loads (PBIAS ≈ 6.00% for each, respectively). However, APEX underpredicted sediment yield and organic N and P loads (PBIAS: 24.75‐27.90%) with SRGEN, although its uncertainty in output was lower than WXGEN results (PBIAS: ?13.02 to ?46.13%). The overall improvement achieved in rainfall generation by SRGEN is demonstrated to be effective in the improving model performance on flow and water quality output.     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

基于生活垃圾分类的厨余垃圾采样方法研究

与复杂的混合生活垃圾相比,厨余垃圾成分较单一,需要针对性的采样方法.本研究基于生活垃圾分类背景,在《生活垃圾采样和分析方法》(CJ/T 313—2009)的基础上,就采样位点和采样节点数对分类存放的厨余垃圾采样的影响展开研究.研究结果表明,仅采集垃圾桶中间位点的样品不具有代表性,不同情景应有不同的采样策略.当厨余垃圾流节点数少于2时需采集所有节点,当厨余垃圾流节点数为3~7时需采集2个节点,而当厨余垃圾节点数为8~18时需采集3个节点,均少于CJ/T 313—2009中要求的采样节点数.厨余垃圾的总量增大,则其最少采样节点数相应上升,但最少采样点受到厨余垃圾流节点数的制约.     

赤潮灾害经济损失评估技术方法

为有效应对赤潮灾害防灾减灾、灾后救援及管理的需求,在综合分析前人提出的赤潮灾害损失评估技术方法的基础上,参考赤潮灾害对受灾体的危害特点,结合实际工作的需求及在实际中可获取的业务数据,提出了赤潮灾害经济损失评估指标体系;根据灾害经济学理论,借鉴其他自然灾害经济损失评估的先进思想,采用市场价格法,分别建立了包括海水养殖业经济损失、滨海旅游业经济损失、赤潮灾害业务与应急监测费用和赤潮灾害处置费用的赤潮灾害经济损失评估模型;最后,提出了赤潮灾害损失评估的技术流程。     

胎盘内多环芳烃分布及源解析研究

探讨多环芳烃在胎盘中的分布,并对其进行源解析。从2012年6月—2013年6月在云南省第一人民医院产科分娩的产妇中随机抽取30例,利用气相色谱-质谱联用仪(GC-MS)检测其胎盘中多环芳烃的含量;比较胎盘的中央部分和边缘部分多环芳烃含量的差异;对多环芳烃进行源解析,探讨其主要来源。胎盘中检测到多种多环芳烃成分;其中2~4个苯环的多环芳烃占总量的90%以上,尤其是萘、苊、芴、菲、蒽、芘、荧蒽的含量较高;萘、苊烯、苊、茚并(1,2,3-c,d)芘、二苯并(a,h)蒽5种多环芳烃在胎盘中央的含量高于边缘,具有显著性差异(P0.05),其他多环芳烃在胎盘中央和边缘的含量无显著性差异(P0.05)。多环芳烃源解析提示80%研究对象体内的多环芳烃主要来自石油产品的燃烧或暴露于石油产品。     

应用概率物种敏感度分布法研究太湖重金属水生生物水质基准

目前广泛使用的水质基准推导方法—物种敏感度分布法存在曲线拟合模型不确定、曲线拟合效果不佳、种内差异欠考虑、基准值不准确等诸多问题,概率物种敏感度分布法可有效解决上述问题。应用概率物种敏感度分布法构建了太湖水体中5种重金属Ag、Pb、Cd、Hg和Zn的概率物种敏感度分布曲线,在此基础上得到了保护水生生物的急性水质基准分别为1.079μg·L~(-1)、637.973μg·L~(-1)、19.465μg·L~(-1)、8.729μg·L~(-1)和105.506μg·L~(-1),慢性水质基准分别为0.108μg·L~(-1)、63.797μg·L~(-1)、1.947μg·L~(-1)、2.340μg·L~(-1)和52.753μg·L~(-1);不同类群间生物对重金属的敏感度存在差异,不同重金属对同一类群生物的毒性也存在差异;通过与国内外已有的重金属水质基准值比较,发现水质基准具有明显的区域性,目前基于国外水质基准或我国整体水域特点来制定的太湖水质标准,往往造成对太湖水生生物欠保护或过保护的状况。     

基于水域面积法的山区河流水电站下游生态流量定值研究

水电站的大量兴建导致下游河道萎缩退化甚至断流,如何改变水电站运行调度方式,维持下游河道一定的生态流量、保障河流健康成为国内外普遍关注的问题.本文在传统水文学方法的基础上融入生物栖息地法思想,以河流生态系统的生物多样性为功能目标,用河道流量反映河流的水文过程,河道水域面积反映河流生态系统的生物多样性,创新性地提出考虑河道水文生态特性的生态流量定值方法——水域面积法.以北江上游浈江二级支流罗坝水为例进行分析计算.计算结果表明:枯水年罗坝水生态流量为2.26 m3·s-1,占多年平均流量的25.97%;平水年生态流量分月控制,生态流量过程与建站前流量过程基本一致.根据枯水年的生态流量值和平水年各月份的生态流量值,结合水电站的运行调度规则,换算成一定时期内的径流量来确定该时期内水电站需释放的水量,进而对水电站下游河道的生态功能进行保护和修复.     

PBDEs的来源特征、环境分布及污染控制

多溴联苯醚(Polybrominated diphenyl ethers,PBDEs)生产应用、环境分布与生态风险之间的关系将如何影响我国的未来,具体涉及到工业、环境、健康、人类繁衍等的社会问题.由于PBDEs阻燃效率高,热稳定性好,价格便宜,作为添加剂被广泛应用在电子、电器、化工、交通、建材、纺织、石油等领域的阻燃产品中.PBDEs进入环境后迁移扩散并富集于沉积物和生物体内,进入人体后引起肝脏毒性、内分泌干扰、神经毒性和生育能力下降等而危害人类的健康.基于此,从生产应用、品种生产量、分子的物理化学特性以及毒性等的文献数据分析了PBDEs的来源特征与环境危害,分析这些性质对环境分布与污染控制的基础支持关系;从沉积物、水体、大气、水生生物、人体5个方面考察了PBDEs的环境本底浓度变化、分配关系、迁移规律、时间效应,分析了生产、应用与扩散的多因素影响关系,发现全球性PBDEs污染物蔓延的现象,沉积物是主要的归趋场所,室内空气中的浓度远高于室外,水中浓度较低,水生生物和人体均能富集PBDEs,通过饮食、母乳和呼吸摄入,可实现代际传播,污染的分布呈现介质与区域的不同特征;污染控制需要考虑点源技术与面源修复的联合,结合PBDEs的物理性质、分子结构及其化学特性,统计分析了微生物法、光化学降解法和零价铁还原法的原理及其有效性,根据PBDEs在产品中存在与分布的特点,提出收集-分离-富集-超临界催化还原和氧化毁毒的工艺,针对实际环境(以电子垃圾塑料和流域水体及沉积物为对象)中的PBDEs进行回收或处理,结合材料如催化剂的应用,从动力学和热力学方面提高PBDEs无害化的效率.最后,从生产管理、环境监测、风险评价、技术集成等方面提出了未来的努力方向.     

水环境中不同形态氮对甲芬那酸光降解影响机制的研究

研究了紫外光照射下水环境中不同形态的无机氮(NO-3、NO-2和NH+4)对甲芬那酸(MEF)光解的影响.NO-3与NO-2均促进MEF的光解,NH+4对MEF的光解基本无影响;在NO-3、NO-2存在下添加适量异丙醇,显著抑制MEF的降解,实验表明NO-3、NO-2在光照下产生了·OH并参与对MEF的氧化降解.同时模拟研究了水体处于不同p E值下,水中存在的不同形态的无机氮对MEF光解的复合影响,其对MEF光解促进作用不是简单的叠加关系,增大p E值,MEF的光解速率先增大后减小.当NO-2和NH+4共存时,对MEF的光解主要表现为NO-2的影响;当NO-2和NO-3共存时,两者对MEF的光解存在拮抗作用.