某高拱坝坝基辉绿岩脉改造特征及其工程影响

通过对我国西南某高拱坝坝基花岗岩体内穿插的辉绿岩脉的侵位和后期构造—热液作用以及浅表改造作用的研究,并对比各组不同走向辉绿岩脉的变形破坏特征,查明坝基辉绿岩脉在其活动后期热液蚀变的基础上,在同一构造应力作用下,各组辉绿岩脉具有不同的主要变形破坏方式,即脉壁张裂、剪切滑移和挤压破碎等,从而控制坝基岩体内与岩脉有关的各种软弱结构面、工程岩体结构及其力学性质,并简要讨论了各组岩脉对拱坝坝基抗滑稳定性和变形稳定性的影响。     

基于GIS的可视化土质边坡稳定性分析系统研究

结合GIS空间数据分析能力与极限平衡法开发了可视化的土质边坡稳定性分析系统GiSlope,介绍了边坡几何模型、外荷载与加筋结构模型、滑动面及地下水位线模型等分析模型的可视化建立过程,阐述了计算分析的设定、任意形状滑动面土条条分方法以及计算参数的确定方法。通过对几个典型实例的分析与国内外商业软件计算结果的对比,验证了系统计算的正确性和可靠性。     

云南白秧坪铜银矿床Cu、Ag迁移形式探讨

在野外地质研究的基础上,采用地球化学热力学方法研究了Cu、Ag的迁移形式。研究结果表明,铜在热液中主要以CuCl42-、Cu(H2O)42+、Cu(S2O3)46-、CuS46-、Cu(HS)42-、Cu(SbS3)410-形式迁移;银在热液中主要以AgCl2-、Ag(S2O3)23-、Ag(HS)2-、AgS23-、Ag(SbS3)25-形式迁移。铜银矿床是在含矿热液物理化学条件发生改变的情况下铜银化合物发生解析作用而成。     

基于分形理论的矿区生态系统稳定性评价

引入非线性理论对矿区生态系统的稳定性进行研究.通过相空间重构的方法确定各混沌吸引子的关联维数,对矿区生态系统的稳定性进行评价.研究表明:焦作矿区矿产资源保有指数、矿产资源回收指数和矿产资源综合利用指数3个指标的分维值都较小,说明自然资源支持度的脆弱性是造成矿区生态系统不稳定性的主要原因.     

气候试验箱内部条件不确定度计算(下)

提供了对温度和湿度气候试验箱内部环境条件进行不确定度分析的方法。首先介绍了测量的不确定度概念,然后讨论容差的意义。考虑到湿度和温度测量是采用确定和合成不确定度。结合校准空载试验箱和有负载试验箱的条件测量的案例。最后,逐条整理成为范本用于分析结果以给出规范的不确定度评估依据。     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

A method of approach to landscape stability. Part 1: Fundamentals and methodology

A four-stage method of providing conditions for improving the stability of a landscape sector is presented. In the first stage, structure and function of the landscape system is examined, predominantly based on the results of monitoring. In the second stage, a method is suggested for applying monitoring data to a dynamic structure with complex functions of the territory under examination. In the third stage, the territory is optimized as to the function of particular components within it. The optimization consists in controlling the dynamics of the flows of material, energy, and population within the sector. In the fourth stage, the holistic function of the landscape strip should be monitored with respect to representative key factors. The entire concept is based on assuming the existence of destabilizing processes leading to ecocritical situations and determining mitigating factors using heuristic methods of optimization.     

Storage stability of injection-molded starch-zein plastics under dry and humid conditions

Corn starch and zein mixtures (4 : 1 dry weight) were extruded and injection-molded in the presence of plasticizers (glycerol and water). Tensile strength and percentage elongation of the molded plastics were measured before and after 1 week of storage under a dry or humid condition (11 or 93% RH). With 10–12% glycerol and 6–8% water, injection-molded plastics had relatively good tensile properties (20- to 25-MPa tensile strength and 3.5–4.7% elongation). But while exposed to dry conditions (11% RH), the molded plastics lost weight (0.5–1.5% in 7 days) and became very brittle, with significant decreases in tensile strength and elongation. Partial replacement (5–10%) of starch with a maltodextrin (average DE 5) reduced the glass transition and melting temperatures of the starch-zein mixture as well as the dry storage stability. Using potato starch instead of corn starch significantly improved the dry storage stability of the injection-molded starch-zein plastics (18- vs 11-MPa tensile strength). Anionic corn starches with a maleate or succinate group (DS<0.01) produced injection-molded plastics with improved tensile properties and storage stability. Plastics prepared from the starch maleate and zein mixture retained the strength during 1 week of dry storage without a significant change (26-MPa tensile strength and 3.7% elongation after 1 week of storage).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Journal paper No. J-15561 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2863.     

Analysis of bank erosion on the Merced River,Yosemite Valley,Yosemite National Park,California, USA

Channel changes from 1919 to 1989 were documented in two study reaches of the Merced River in Yosemite National Park through a review of historical photographs and documents and a comparison of survey data. Bank erosion was prevalent and channel width increased an average of 27% in the upstream reach, where human use was concentrated. Here, trampling of the banks and riparian vegetation was common, and banks eroded on straight stretches as frequently as on meander bends. Six bridges in the upper reach constrict the channel by an average of 38% of the original width, causing severe erosion. In the downstream control reach, where human use was minimal, channel widths both decreased and increased, with a mean increase of only 4% since 1919. Bank erosion in the control reach occurred primarily on meander bends. The control reach also had denser stands of riparian vegetation and a higher frequency of large woody debris in channels. There is only one bridge in the lower reach, located at the downstream end. Since 1919, bank erosion in the impacted upstream reach contributed a significant amount of sediment (74,800 tonnes, equivalent to 2.0 t/km²/yr) to the river. An analysis of 75 years of precipitation and hydrologic records showed no trends responsible for bank erosion in the upper reach. Sediment input to the upper reach has not changed significantly during the study period. Floodplain soils are sandy, with low cohesion and are easily detached by lateral erosion. The degree of channel widening was positively correlated with the percentage of bare ground on the streambanks and low bank stability ratings. Low bank stability ratings were, in turn, strongly associated with high human use areas. Channel widening and bank erosion in the upper reach were due primarily to destruction of riparian vegetation by human trampling and the effect of bridge constrictions on high flow, and secondarily to poorly installed channel revetments. Several specific recommendations for river restoration were provided to park management.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. III. Emulsion-grade products

The thermal oxidative stability of various formulations based on emulsion-grade ABS was studied by the chemiluminescence technique. Emulsion products were found to be essentially less stable than ionic mass polymerization resins. Among the antioxidants studied, Santonox R is clearly more efficient than Irganox 1076 and Irganox 3114, and its superiority is reflected primarily in improved induction period values. The introduction of Tinuvin 770 and Tinuvin 328 UV stabilizers into emulsion resins does not change the durability of the products. In mixtures where both Irganox 1076 and UV stabilizers are present, a certain antagonistic effect was noted at high UV stabilizer concentrations.