中国后生耳蕨组和新生耳蕨组（耳蕨属）的叶表皮解剖研究

利用光学显微镜对国产耳蕨属后生耳蕨组和新生耳蕨组３１个种４０个样品成熟叶表皮的细胞的形态特征的研究结果表明，后生耳蕨组和新生耳蕨组植物的气孔均分布在叶片下表皮，为气孔多形型，气孔基本类型有四细胞型和极型两种；气孔的类型、大小、气孔指数、表皮细胞形状等有一定的稳定性，可以作为后生耳蕨组和新生耳蕨组植物系统与分类研究的依据之一．     

Effects of Soil Moisture Variations on Deposition Velocities Above Vegetation

The parameterized subgrid-scale surface flux (PASS) modelprovides a simplified means of using remote sensing data from satellites and limited surface meteorological information to estimate the influence of soil moisture on bulk canopy stomatalresistances to the uptake of gases over extended areas.PASS-generated estimates of bulk canopy stomatal resistance were usedin a dry deposition module to compute gas deposition velocitieswith a horizontal resolution of 200 m for approximately 5000 km² of agricultural crops and rangeland. Results were compared with measurements of O₃ flux and concentrations made during April and May 1997 at two surface stations and from an aircraft. The trend in simulated O₃ deposition velocityduring soil moisture drydown over a period of a few days matchedthe trend observed at the two surface stations. For areas underthe aircraft flight paths, the variability in simulated O₃ deposition velocity was substantially smaller than the observedvariability, while the averages over tens of kilometers were usually in agreement within 0.1 cm s^-1. Model results indicated that soil moisture can have a major role in depositionof O₃ and other substances strongly affected by canopy stomatal resistance.     

Use of sap flow measurements to validate stomatal functions for mature beech (Fagus sylvatica) in view of ozone uptake calculations

For a quantitative estimate of the ozone effect on vegetation reliable models for ozone uptake through the stomata are needed. Because of the analogy of ozone uptake and transpiration it is possible to utilize measurements of water loss such as sap flow for quantification of ozone uptake. This technique was applied in three beech (Fagus sylvatica) stands in Switzerland. A canopy conductance was calculated from sap flow velocity and normalized to values between 0 and 1. It represents mainly stomatal conductance as the boundary layer resistance in forests is usually small. Based on this relative conductance, stomatal functions to describe the dependence on light, temperature, vapour pressure deficit and soil moisture were derived using multivariate nonlinear regression. These functions were validated by comparison with conductance values directly estimated from sap flow. The results corroborate the current flux parameterization for beech used in the DO₃SE model.     

45#钢和Q235在不同水环境中的腐蚀行为研究

目的研究碳钢在不同水环境条件下的腐蚀行为。方法通过开展45#钢及Q235两种典型的碳钢材料在淡海水交替、海水及淡水自然环境下2年的暴露试验,将三种环境下材料的腐蚀形貌、腐蚀速率进行对比,总结3种材料在不同水环境下的腐蚀规律,对其腐蚀机理进行了简要的探讨,并对其长周期的腐蚀行为进行预测。结果对45#钢来说,淡海水环境对其的影响是海水环境下的92%,淡水环境的影响是海水环境下的46%;对Q235来说,淡海水环境对其的影响是海水环境下的88%,淡水环境的影响是海水环境的53%。结论碳钢在海水环境下耐蚀性最差,在淡海水交替自然环境下次之,在淡水环境下的耐蚀性能最好。     

Impervious surface as an indicator of pH and specific conductance in the urbanizing coastal zone of New Jersey, USA

Impervious surface is often used as an indicator of non-point source pollution in urban areas due to the strong relationship between percent impervious surface cover and water-quality impacts. In many cases, a threshold effect exists where water quality rapidly degrades above a given percent cover, but the exact threshold level appears to vary across regions. This study explores the relationship between pH, specific conductance, and percent impervious surface cover in the urbanizing coastal zone of New Jersey (USA) to determine the nature of the relationship in the region. The results of the analysis suggest the system is very sensitive to impervious surface, with a threshold potentially existing between 2.4% and 5.1% impervious surface cover. An examination of future conditions suggests that by 2020 water quality in more than 50% of the catchments in the study area will be negatively impacted by non-point source pollution associated with impervious surface.     

Modeling the vegetation-atmosphere carbon dioxide and water vapor interactions along a controlled CO2 gradient

Ecosystem functioning is intimately linked to its physical environment by complex two-way interactions. These two-way interactions arise because vegetation both responds to the external environment and actively regulates its micro-environment. By altering stomatal aperture, and therefore the transpiration rate, plants modify soil moisture and atmospheric humidity and these same physical variables, in return, modify stomatal conductance. Relationships between biotic and abiotic components are particularly strong in closed, managed environments such as greenhouses and growth chambers, which are used extensively to investigate ecosystem responses to climatic drivers. Model-assisted designs that account for the physiological dynamics governing two-way interactions between biotic and abiotic components are absent from many ecological studies. Here, a general model of the vegetation-atmosphere system in closed environments is proposed. The model accounts for the linked carbon-water physiology, the turbulent transport processes, and the energy and radiative transfer within the vegetation. Leaf gas exchange is modeled using a carbon gain optimization approach that is coupled to leaf energy balance. The turbulent transport within the canopy is modeled in two-dimensions using first-order closure principles. The model is applied to the Lysimeter CO₂ Gradient (LYCOG) facility, wherein a continuous gradient of atmospheric CO₂ is maintained on grassland assemblages using an elongated chamber where the micro-climate is regulated by variation in air flow rates. The model is employed to investigate how species composition, climatic conditions, and the imposed air flow rate affect the CO₂ concentration gradient within the LYCOG and the canopy micro-climate. The sensitivity of the model to key physiological and climatic parameters allows it to be used not only to manage current experiments, but also to formulate novel ecological hypotheses (e.g., by modeling climatic regimes not currently employed in LYCOG) and suggest alternative experimental designs and operational strategies for such facilities.     

无刺构骨秋季光合特性的初步研究

采用Li-6400光合测定系统对无刺构骨的秋季光合特性进行了初步研究.结果表明,无剌构骨净光合速率（Pn）日变化规律为双峰曲线形式,有“午睡”现象,最高峰值于11：00左右出现,次高峰出现在14：00,日最大净光合速率为8.33μmol/m2·s,净光合速率（Pn）与气孔导度（Cond）、蒸腾速率（Tr）呈正相关,与胞间CO2浓度（Ci）呈负相关.无刺枸骨光补偿点为12.146μmol/m2·s,光饱和点为1499μmoL/m2·s.     

垃圾填埋场周边桉树光合生理特性研究

为了解垃圾填埋场环境下植物的光合适应性,利用LI-6400便携式光合测定仪,以呼马山森林公园为对照,对位于昆明市东郊垃圾填埋场和对照区的直杆桉Eucalyptus maideni进行了光响应与光合日进程的测定。结果表明:填埋场直杆桉的净光合速率随光强的增加先增加后稍有下降并趋于稳定,光抑制不明显;对照的净光合速率随光强的增加先增加后缓慢下降;在相同光照强度下,填埋场直杆桉的净光合速率、蒸腾速率始终高于呼马山对照的,说明直杆桉可通过提高自身的光合能力和蒸腾速率来适应填埋场的特定环境。胞间CO2浓度随光强的增加先下降后上升,与净光合速率大体呈相反变化;蒸腾速率随光强变化的趋势与气孔导度变化相一致。另外,填埋场直杆桉净光合速率日变化呈单峰曲线,无明显"午休"现象,其变化趋势与蒸腾速率、气孔导度的大体相同。对照的净光合速率、气孔导度、蒸腾速率与填埋场的变化趋势相似,但变化幅度较少。在自然条件下,填埋场直杆桉的净光合速率和蒸腾速率仍明显高于呼马山对照的。     

Electroactive Materials Composed of Starch

Extruded films of plasticized starch were doped with metal halides to produce solid ion-conducting materials. The electrical conductance of the material increased from 10^–11 to 10^–6 Siemens/cm. The type and amount of dopant affects the conductance of the material. Although the materials are moisture sensitive, water content does not have a significant effect on the conductance of doped films. Mechanical properties of doped films indicate that the starch is plasticized and that the ion-conducting material is strong and tractable. Unlike intrinsically conductive polymers, electroactive starch materials can be extruded in thin films or molded into any shape.     

甘家湖梭梭林国家级自然保护区退化梭梭的光合特性研究

梭梭是西北干旱地区重要的表征类群。本项目选取甘家湖梭梭林国家级自然保护区内退化梭梭生长的不同区域,即对照组(长势较好)区、沙鼠迫害区、牛羊践踏区,选择晴好天气,利用LI-6400XT便携式光合测定仪测得3个样地内退化梭梭叶片光合生理生态的相关指标,结果表明:梭梭净光合速率(Pn)、蒸腾速率(Tr)、气孔导度(Gs)的日变化曲线呈双峰型,具有光合午休特点;由于3个样地所受干扰程度的不同,梭梭的净光合速率、蒸腾速率等各指标均有着显著的差异性,其中沙鼠迫害区与对照组区内梭梭光合指标差异性较为显著,牛羊践踏区内与对照组区梭梭无显著差异,光合能力总体表现出对照组区>牛羊践踏区>沙鼠迫害区。