不同粒径炉渣对磷的静态吸附

研究了不同粒级炉渣对含磷废水的静态等温吸附性能,为其在污水处理领域的有效利用和合理级配提供理论依据。经筛分得到<0.2 mm、0.2~0.45 mm、0.45~0.9 mm、0.9~2 mm、2~4 mm、4~6 mm、≥6 mm的7个粒级的供试炉渣,其中0.9~4 mm粒级占总量的64.54%。XRD、XRF分析显示,各粒级炉渣物相组成相似,<0.2 mm粒级炉渣中活性铝含量最高。静态吸附实验表明,炉渣对磷素的最大吸附量为4 021 mg/kg,最佳吸附时间为24 h;Langmuir和Freundlich吸附等温线可较好地拟合各粒级炉渣对溶液中磷素的吸附,而小于0.9 mm粒级炉渣具有更高的拟合度;炉渣粒径越小,吸附能力越强,<0.2 mm粒级炉渣的理论饱和吸附容量达14 084 mg/kg,≥6 mm粒级炉渣吸附磷素能力差;受粒径、溶液含磷浓度等因素影响,炉渣的平均理论吸附容量为1 142.4 mg/kg。     

The Radial Increment and Stemwood Element Concentrations of Scots Pine in the Area Influenced by the Narva Power Plants in Northeast Estonia

Soil is an important component of a watershed. Understanding soils and their interactions with the other components are, thus, considered to be critical and essential for conservation of resources and management of the watershed. Development of soil sampling and analysis programs are crucial for these purposes. Site-specific soil data are needed to identify current soil characteristics, as well as to validate datasets gathered for watershed-scale modelling of non-point sources (NPS) of pollutants arising from various land-use activities, hydrodynamics and water quality. The Koycegiz Lake–Dalyan Lagoon watershed, located in the southwest of Turkey along the Mediterranean Sea Coast, was selected as the study area for watershed modelling purposes. Development of soil sampling plans, their practical optimization, soil analyses and interpretation are presented in this article. The soil analyses conducted include physical, chemical and specific soil characteristics. Within the framework of this study, soil fertility parameters are presented and evaluated. Such an approach used is recommended for especially developing countries where up-to-date data sets are not fully available and/or centrally publicized.     

新安江水库透明度与叶绿素a浓度反演模式初步研究

新安江水库有完整监测数据记录开始于1985年,但2001年后才有浮游植物密度和叶绿素a数据。文章利用2001—2009年透明度和叶绿素a监测数据,采用SPSS统计软件拟合回归方程,再根据2001年以前的透明度数据,反演相对应的新安江水库浮游植物叶绿素a浓度。结果表明,新安江水库1988、1990年浮游植物生物量较低,而1993、1996、2009年浮游植物生物量分别出现峰值,2000年以前浮游植物生物量波动剧烈,2000年以后基本呈上升趋势,特别是2005年以后上升趋势非常明显。     

Assessment of Air Quality, Emissions and Management in a Local Urban Environment

This paper describes one example of how the UK National Air Quality Strategy (NAQS) is implemented in a local urban environment. The paper reviews the beginning of this process, by examining the review and assessment procedures of the NAQS in the London Borough of Barnet. By the application of available UK tools of local air quality management (LAQM), the process began through analysis of the levels of local emissions and progressed onto modelling of current and future air quality. A map showing combined emission hotspot areas for the Borough indicated and higher emission rates occur in the south of the Borough and along the major transport corridors, as road sources dominate emissions. Dispersion modelling studies were also conducted for this purpose, using the screening models GRAM, PGRAM and ADMS Urban for an in-depth assessment. These analyses found that some local point sources and the majority of Borough roads with over 20,000 vehicles per day produced exceedances of the future objectives for air quality for some pollutants.Recommendations for the progression of LAQM in the Borough are made and include the update and expansion of the emissions information held for use in future modelling studies. The paper demonstrates the experience of implementing the Strategy, using the tools and procedures available for this purpose, in a local urban environment that is similar to many in the UK.     

Temporal moments analysis of preferential solute transport in soils

Temporal moments analysis of solute breakthrough curves is used to investigate the preferential leaching of chloride, nitrate and phosphate through an Australian soil. Recent studies have shown that current models and methods do not adequately describe the leaching of nutrients through soil, often underestimating the risk of groundwater contamination by surface-applied chemicals, and overestimating the concentration of resident solutes. This inaccuracy results primarily from ignoring soil structure and non-equilibrium between soil constituents, water and solutes. Therefore simple models are required to accurately characterise solute transport in natural and agricultural soils under non-equilibrium conditions. A multiple sample percolation system, consisting of 25 individual collection wells was constructed to study the effects of localised soil heterogeneities on the transport of nutrients (NO₃ ^–, Cl^–, PO₄ ^{3 –}) in the vadose zone of an agricultural soil predominantly dominated by clay. Using data collected from the multiple sample percolation experiments, this paper compares and contrasts the performance of temporal moments analysis with two mathematical models for predicting solute transport, the advective-dispersion model with a reaction term (ADR) and a two-region preferential flow model (TRM) suitable for modelling preferential transport. The values for solute transport parameters predicted by temporal moments analysis were in excellent agreement with experimental data and results from ADR and TRM. It is concluded that temporal moments analysis when applied with other physical models such as the ADR and TRM, provide an excellent means of obtaining values for important solute transport parameters and gaining insight of preferential flow. These results have significant ramifications for modelling solute transport and predicting nutrient loadings.     

曲线拟合在环境空气污染物浓度预测中的应用

从分析环境空气污染物月均值的时间变化规律入手 ,找出与污染物变化特征相对应的数学函数 ,应用曲线拟合的方法 ,结合统计回归分析 ,建立曲线拟合方程。该方程可应用于污染物浓度的中长期预测     

An Integrated Approach Towards Assessing the Value of Water: A Case Study on the Zambezi Basin

The aim of this paper is to develop a methodology for assessing the value of water in the different stages in the water cycle. It is hypothesised that if a cubic metre of water provides some benefit in some spot at a certain moment, this cubic metre of water has a certain value not only at that point in space and time, but in its previous stages within the water cycle as well. This means that, while water particles flow from upstream to downstream, water values ‘flow’ in exactly the opposite direction. The value of water in a certain place is equal to its value in situ plus an accumulated value derived from downstream. This value-flow concept is elaborated for the Zambezi basin. It is found that water produces the smallest direct economic benefits in the upper part of the Zambezi basin. However, water flows in this part of the basin − due to their upstream location − have the highest indirect values. Return flows from the water-using sectors are particularly valuable in the upstream sub-basins. The analysis shows that the value per unit of river water increases if we go from downstream to upstream. Another finding of the study is that percolation of rainwater is generally more valuable than surface runoff. Finally, a plan to export water from the river Zambezi to South Africa is evaluated in terms of its opportunity costs. The results of this study show that the value-flow concept offers the possibility of accounting for the cyclic nature of water when estimating its value. It is stressed, however, that for the current study many crude assumptions had to be made, so that the exact numbers presented should be regarded with extreme caution. Further research is necessary to provide more precise and validated estimates. This revised version was published online in July 2006 with corrections to the Cover Date.     

柴油机SCR催化器载体结构参数优化

提出一种柴油机选择催化还原（SCR）催化器载体结构参数优化的设计方法,根据车用柴油机排量,将SCR催化器载体分为4类,选取载体体积、长度、目数、壁厚和涂层厚5个结构参数为设计变量,以高NO。转化率及低压力损失为优化目标,利用拉丁超立方实验设计选择样本点进行数值模拟,在构建的Kriging近似模型基础上,对载体结构参数采用改进的非支配排序遗传算法NSGA—II（non—dominatedsortinggeneticalgorithm—II）进行优化设计。结果表明：Kriging近似模型的拟合精度较高,结合NSGA—II算法对SCR催化器载体结构参数进行优化是可行的、有效的,不同排量下的优化结果均能够较好地满足设计要求。     

基于最佳摄动量法的桩基承载力反演

通过高应变动力试桩法来获得桩土参数是目前比较流行的试桩方法,其原理主要是通过以桩顶的实测信息来反演桩土参数,其中比较成熟的CAPW APC法主要用试凑法来反演桩土模型参数,其反演结果呈现一定的随机性且正确性过于依赖操作者经验。本文尝试以CAPW APC法所采用比较成熟的桩土模型为基础,引入基于最佳摄动量法的局部优化方法来反演桩土参数。在弹性波波动方程隐式差分的基础上,对反演参数采用摄动展开并推导出参数反演的递推公式,最后给出合适的反演算法。考虑到初始参数对局部优化方法的影响,根据场地的实际情况选取合适的初始模型,计算显示可以获得比较理想的结果,说明本法是对桩基动测方法的一种有效的新尝试。