An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

A numerical study on the effects of EGR and spark timing to combustion characteristics and NOx emission of a GDI engine

EGR is one of the most significant strategies for reducing especially nitrogen oxides (NO_x) emissions from internal combustion engines. The thermal efficiency of spark ignition engines is lower than compression ignition engines because of its lower compression ratio. If the compression ratio is increased to obtain higher thermal efficiency, there may be a knocking tendency in spark ignition engines. EGR can be used in order to reduce NO_x emissions and avoid knocking phenomena at higher compression ratios. In-cylinder temperature at the end of combustion is decreased and heat capacity of fresh charge is increased when EGR applied. Besides EGR, spark timing is another significant parameter for reducing exhaust emissions such as nitrogen oxides, and unburned hydrocarbon (UHC). In this study the effects of EGR and spark timing on spark ignition engine were investigated numerically. KIVA codes were used in order to model combustion process. The combustion process has been modeled for a single cylinder, four stroke and gasoline direct injection (GDI) spark ignition engine. The results showed that in-cylinder pressure and heat release rate decrease as EGR ratio increase. In-cylinder pressure increases with the advancing of spark timing. Advancing spark timing increases the heat release rate and in-cylinder temperature. The simulation results also showed that EGR reduced exhaust gas temperature and NO_x emissions.     

Photodegradation of Oryzalin in aqueous isopropanol and acetonitrile

The phototransformation of Oryzalin was studied under UV light (λ_max ≥ 290 nm) and sunlight (λ_max ≥ 250 nm) in aqueous isopropanol and acetonitrile solution in absence and presence of TiO₂ as sensitizer. The rate of photodegradation of Oryzalin in different solvent system followed first-order kinetics, and calculated half-lives were found to be in the range of 23.52-53.75 h for UV light and 41.23-61.43 h for sunlight. From this study, total 12 photoproducts were identified and characterized on the basis of column chromatography and Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved was hydrolysis, breaking of sulfonic bond, and loss of amino and sulfonic acid group.     

中国工业CO_2排放的行业间传导网络及协同减排

工业是碳排放的主要部门,科学识别工业CO_2排放的行业间传导并揭示其联动结构对于跨行业协同减排具有重要的理论和现实意义。本文基于1991-2012年中国工业36个两位数行业数据,在VAR模型框架下,利用Granger因果检验方法对CO_2排放的行业间传导关系进行了识别,并从关系视角出发,借助社会网络分析方法(SNA)揭示工业CO_2排放行业间传导的整体和个体网络结构特征,研究发现:工业CO_2排放的行业间传导呈网络结构形态,网络密度在1-6期的滞后阶数下呈先升高后下降的趋势,并且在滞后2期达到最高;燃气生产和供应业、电力热力生产和供应业、服装业、造纸及纸制品业、木材加工业具有较高的度数中心度、中介中心度、接近中心度,在网络中处于核心位置,并发挥中介和桥梁作用;在CO_2排放的行业传导网络中,煤炭采选业、黑色金属矿采选业、有色金属矿采选业等10个行业属于经纪人板块,医药制造业、饮料制造业、化学纤维制造业等9个行业属于净受益板块,金属制品业、塑料制品业、农副食品加工业等11个行业属于双向溢出板块,烟草加工业、石油加工及炼焦业、燃气生产和供应业等6个行业属于净溢出板块。基于上述结论,本文提出了工业CO_2排放的跨行业协同减排思路。     

家庭部门生活能源消费碳排放:测度与驱动因素研究

本文运用IPCC的二氧化碳排放量测算方法,在省际层面测度了我国家庭部门直接能源消费碳排放,并基于扩展的STIRPAT和Kaya模型,构建家庭部门直接能源消费碳排放影响因子动态面板数据模型,对我国2003-2012年分省面板数据样本及城乡子样本进行系统GMM估计。本文研究表明,第一,我国城乡家庭部门碳排放总量和人均碳排放在近十年都呈快速上升趋势,家庭部门碳排放的空间分布具有明显的地域差异特征,高碳排放地区主要集中在东、中部地区,西部地区的碳排放水平较低;第二,城乡家庭部门生活能源消费的上期碳排放量对本期碳排放产生重要的正向影响,这反映出我国家庭部门碳排放具有显著的惯性特征和路径依赖性,是一种动态自适应机制;人口规模、居民消费水平、能源消费结构、碳排放强度、能源消费强度和城镇化因素,都对我国居民能源消费碳排放总量及人均碳排放具有显著的影响,城乡之间的家庭能源消费碳排放驱动因素存在差异。本文研究得到如下启示及政策含义:家庭部门碳减排将是一个有步骤、分区域的渐进过程,我国碳减排政策应当兼顾消费升级和碳排放的双重目标,努力构建分层次碳减排的适应性预期机制。具体而言,一方面应着眼于引导和激励居民低碳消费,缓解人口规模增加、消费水平提升和城镇化对家庭部门碳减排的压力;另一方面要通过能源价格改革、财政政策和环境规制政策等优化我国能源消费结构,不断降低煤炭消费比重,提高清洁能源的消费。同时,通过技术创新、设备改造等科技手段提高煤炭利用效率,降低碳排放强度,这些政策将更有利于城镇家庭部门碳减排。     

燃煤电厂烟尘超低排放技术措施研究

针对越来越严格的环保要求,介绍了原有的除尘技术,并对除尘器新技术改造方案进行了说明,其中重点对电袋复合代替静电除尘技术、在静电除尘器中增置旋转电极、更改工频电源为高频电源、在电除尘器前加装低温换热器、脱硫后增加湿式电除尘器技术等方案进行比较分析。为了达到超低排放要求,对不同的烟尘超低排放实践工艺进行了说明,并结合东部沿海地区可再生能源发展空间有限的实际情况,提出加快推广超低排放技术在现有燃煤电厂的应用,实现传统煤电产业和环保产业的转型升级。     

纳米晶粒TiO2多孔微球的制备及其光催化性能的研究进展

介绍了纳米晶粒TiO2多孔微球的主要制备方法、主要参量及表征、光催化性能研究进展,指出了纳米晶粒TiO2多孔微球制备过程的技术关键与基本参量的功能。针对目前存在的问题,提出了今后的主要研究方向,并展望了纳米晶粒TiO2多孔微球在水处理领域的应用前景。     

教室内二氧化碳污染和新风量测定

新风量不足,呼吸产生的二氧化碳可造成教室内CO_2浓度严重超标,影响学生学习,降低课堂教学效果。以人呼出的CO_2作为示踪气体,测定研究教室有人和无人情况下教室内CO_2浓度变化,对教室新风量进行计算,其结果:室内CO_2排放条件不同,相应方程计算所得新风量基本一致,用忽略室外CO_2本底浓度的新风量计算公式,结果有约17%的误差。开启门窗产生对流,可保障教室内空气的新鲜。     

罗丹明染料荧光猝灭法分别测定痕量二氧化氯和亚氯酸根

在碱性条件下,ClO2氧化罗丹明染料发生荧光猝灭可选择性地测定ClO2的含量,而ClO2-不干扰测定;在酸性条件下可测量ClO2与ClO2-共同产生的荧光猝灭强度,利用差减法可求出ClO2-的含量.对于罗丹明S,罗丹明G,罗丹明B及丁基罗丹明B四体系,ClO2浓度分别在0.00840-0.53μg·ml-1,0.0930-3.15μg·ml-1,0.215-2.610μg·ml-1及0.0825-1.096μg·ml-1范围内,与四体系的荧光猝灭强度呈线性关系;亚氯酸根浓度分别在0.00950-0.711μg·ml-1,0.0940-2.36μg·ml-1,0.473-4.73μg·ml-1及0.473-2.36μg·ml-1范围内,与四体系的荧光猝灭强度呈线性关系.另外,选择罗丹明S荧光猝灭法分别测定了饮用水中ClO2及ClO2-,获得了满意的结果.     

二氧化氯对摇蚊幼虫的毒效试验及影响因素

以水厂原水为试验水样,研究了二氧化氯对摇蚊不同龄期幼虫的毒性效果（24 h）,并考察了温度和接触时间对二氧化氯毒性效果的影响.结果表明,二氧化氯对摇蚊幼虫具有极为显著的毒性作用,25℃时二氧化氯对4龄幼虫的24h半致死浓度（LC₅₀）为0 .41 mg/L.二氧化氯对摇蚊幼虫的毒力随幼虫龄期的增长而降低,1龄幼虫对二氧化氯最敏感,其中二氧化氯对4龄幼虫的LC₅₀是1龄幼虫的1 .78倍.二氧化氯的毒力在一定范围内符合正温度系数规律,二氧化氯对4龄幼虫的毒力在15～30℃范围内增加了2 .16倍.接触时间从12 h延长至24 h,二氧化氯对4龄幼虫的毒力增幅显著;当接触时间至36 h,与接触24 h相比毒力增幅不明显.