石化企业燃煤电厂二氧化硫控制对策研究

通过对国内外燃煤电厂二氧化硫控制现状、政策及技术的对比分析，提出了石化企业燃煤电厂二氧化硫控制的战略性对策。     

Effect of CuO on the efficiency of sulfur capture of Ca-based compounds during coal combustion

The efficiency of sulfur capture of CaO,Ca(OH)2 and CaCO3 as well as the effect of CuO on them were studied.Resulta showed that the efficiency of sulfur capture of Ca(OH)2 is the highest among these three compounds.When CuO was used with each of CaO,Ca(OH)2 and CaCO3 at the same time,the efficiency of all of them would rise,and that of Ca(OH)2 raise most.The efficiency of sulfur capture of Ca(OH)2 with CuO is 14.4% higher than that without CuO.     

醋酸钙溶液吸收二氧化硫烟气的试验研究

介绍了醋酸钙溶液吸收二氧化硫烟气的小型试验和扩大试验,试验结果表明,醋酸钙溶液对二氧化硫有较强的吸收能力和较快的吸收速度,通过二级吸收后,烟气中二氧化硫的浓度能够低于0.05%的国家排放标准要求。     

锰铁合金炉灰资源化利用的试验研究

以锰铁合金炉灰为原料 ,分别用二氧化硫还原法和烧结法制备硫酸锰溶液 ,试验和实际研究结果表明 ,以锰铁合金炉灰为原料制备硫酸锰溶液是经济可行的。     

N2O emissions from agricultural soils in the North China Plain:the effect of chemical nitrogen fertilizer and organic manure

ＩｎｔｒｏｄｕｃｔｉｏｎＮｉｔｒｏｕｓｏｘｉｄｅ (Ｎ2 Ｏ)ｉｓａｖｅｒｙｉｍｐｏｒｔａｎｔｇｒｅｅｎｈｏｕｓｅｇａｓｉｎｔｈｅａｔｍｏｓｐｈｅｒｅ.ＩｎｔｅｒｅｓｔｉｎｔｈｅｉｎｃｒｅａｓｅｏｆａｔｍｏｓｐｈｅｒｉｃＮ2 ＯｈａｓｂｅｅｎｒｅｃｅｎｔｌｙｓｔｉｍｕｌａｔｅｄｂｙｔｈｅｕｎｄｅｒｓｔａｎｄｉｎｇｔｈａｔＮ2 Ｏｇａｓｐｌａｙｓａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｈｅｃｈｅｍｉｓｔｒｙａｎｄｏｚｏｎｅｌａｙｅｒｄｅｓｔｒｕｃｔｉｏｎｏｆｔｈｅｓｔｒａｔｏｓｐｈｅｒｅ.Ｔｈｅｒａｄｉａｔｉｖ…     

TiO2薄膜超亲水性的研究进展

TiO2薄膜在紫外、光照射下所表现出来的超亲水性得到了国内外许多科学工作者的广泛关注。简要介绍了TiO2薄膜材料的超亲水机理、制备方法及应用发展等，指出了目前存在的问题并简单评述了今后的研究和发展方向。     

A Sensitivity Analysis of Ozone Formation to Ambient Air Composition by Means of Photochemical Models

The prediction of the atmospheric concentration of ozoneand of other photochemical pollutants represents one of themajor scientific challenges in the study of urban airquality. To this aim, photochemical models are widelyapplied as support tools for regulatory purposes, but theirresults are known to be affected by several uncertainties,in boundary conditions, geographical and meteorologicaldata and the chemical composition of emission and ambientair as well. Also the mechanism selected to describe theurban chemistry may lead to large differences in the modelresults. In this work, the influence of ambient air composition onthe results of photochemical model has been studied using a simple Lagrangian trajectory model coupled with different chemical sub-models (CB-IV and a simplified version of EMEP). To this aim a parametric sensitivity study of ozone with respect to its precursors' concentration was performed withreference to the same meteorological conditions and by simulatingdifferent scenarios characterized by specific emitted pollutantsconcentration. Rather than analyzing sensitivity by changing initial composition, an analytical local sensitivity concept has been applied; this allowed evaluation the influence of initial concentration on the predicted ozone concentration andto discriminate between VOC-sensitive and NOx-sensitive kineticregimes. Finally, these results have been successfully comparedwith those obtained applying the concept of photochemical indicators (i.e. O₃/NOy and H₂O₂/HNO₃ ratios).     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

Carbon storage potential in natural fiber composites

The environmental performance of hemp based natural fiber mat thermoplastic (NMT) has been evaluated in this study by quantifying carbon storage potential and CO₂ emissions and comparing the results with commercially available glass fiber composites. Non-woven mats of hemp fiber and polypropylene matrix were used to make NMT samples by film-stacking method without using any binder aid. The results showed that hemp based NMT have compatible or even better strength properties as compared to conventional flax based thermoplastics. A value of 63 MPa for flexural strength is achieved at 64% fiber content by weight. Similarly, impact energy values (84–154 J/m) are also promising. The carbon sequestration and storage by hemp crop through photosynthesis is estimated by quantifying dry biomass of fibers based on one metric ton of NMT. A value of 325 kg carbon per metric ton of hemp based composite is estimated which can be stored by the product during its useful life. An extra 22% carbon storage can be achieved by increasing the compression ratio by 13% while maintaining same flexural strength. Further, net carbon sequestration by industrial hemp crop is estimated as 0.67 ton/h/year, which is compatible to all USA urban trees and very close to naturally, regenerated forests. A comparative life cycle analysis focused on non-renewable energy consumption of natural and glass fiber composites shows that a net saving of 50 000 MJ (3 ton CO₂ emissions) per ton of thermoplastic can be achieved by replacing 30% glass fiber reinforcement with 65% hemp fiber. It is further estimated that 3.07 million ton CO₂ emissions (4.3% of total USA industrial emissions) and 1.19 million m³ crude oil (1.0% of total Canadian oil consumption) can be saved by substituting 50% fiber glass plastics with natural fiber composites in North American auto applications. However, to compete with glass fiber effectively, further research is needed to improve natural fiber processing, interfacial bonding and control moisture sensitivity in longer run.     

纳米二氧化钛粉体的制备及对染料脱色的研究

以钛酸四丁酯为原料,采用溶胶-凝胶法、水热沉淀法、水解法制备了纳米二氧化钛粉体。经XRD对三种方法制得粉体进行了表征,讨论了三种方法的优缺点。以水解法制得二氧化钛粉对六种染料进行了脱色研究,结果表明其有良好的光催化脱色性能。