论可持续发展的物质体系

可持续发展的物质体系包括资源、环境和生态。可持续发展的终极基础是资源物质变换，可持续发展的生存依托是环境，可持续发展的动态载体是生态平衡网络。本文通过分析资源、环境和生态之间的关系与相互作用，提出了可持续发展的基础是物质体系的观点。     

Living the green city: Freiburg's Solarsiedlung between narratives and practices of sustainable urban development

The solar settlement (Solarsiedlung) in Freiburg, Germany, has been widely hailed as an eco-city or green city neighbourhood and a blueprint for sustainable urban development. However, as there is a noticeable lack of critical analysis of what constitutes Solarsiedlung as an “eco-city”, this paper studies narratives and practices of sustainable urban development. First, we look at Solarsiedlung as a best-practice model – a narrative that was produced and perpetuated by architects, urban planners, investors and academics celebrating this neighbourhood as a technologically leapfrogging, economically sound and socially integrated project. Second, we explore the everyday practices and lived experience of the residents in Solarsiedlung. Bringing together these two perspectives, we contribute to a more comprehensive understanding and critical reading of the interplay between the ecological, economic and social dimensions of sustainable development as seen from different viewpoints. Findings indicate that Solarsiedlung as a best-practice model is embedded in growth-oriented neoliberal strategies that are in conflict with the everyday practices and lived experience of the residents. Our findings put into question the widely assumed transferability of best-practice models in sustainable urban development.     

基于系统动力学(SD)的民航可持续安全发展决策研究

为了解决民航行业保障能力与发展需求之间的矛盾所带来的安全问题,在对民航行业进行系统分析的基础上,利用系统动力学方法建立了民航可持续安全发展决策流图。通过专家访谈和文献分析法构建了3种政策场景。利用Vensim软件对模型进行了仿真,结果表明:在保障能力不变的条件下,2015年将航班审批率降低0.3,可实现行业的安全目标,但航班量在2015—2025年发展十分缓慢;在发展水平不变的条件下,2015年将保障能力提高0.3,可在2021年实现行业的安全目标;在可持续发展的策略下,在2015—2018年将航班审批率降低0.3、2018年之后将航班审批率提高0.4,在2015年将保障能力提高0.2,可实现我国民航行业的可持续安全发展。     

Seasonal Flushing of Pollutant Concentrations and Loads in Urban Stormwater1

Schiff, Kenneth C. and Liesl L. Tiefenthaler, 2011. Seasonal Flushing of Pollutant Concentrations and Loads in Urban Stormwater. Journal of the American Water Resources Association (JAWRA) 47(1):136‐142. DOI: 10.1111/j.1752‐1688.2010.00497.x Abstract: Despite broad observations of first flush within storms, the scientific understanding of seasonal flushing remains incomplete. Seasonal flushing occurs when initial storms of the season have greater concentrations or loads than storms later in the season. The goal of this study was to census stormwater concentrations and loads from an arid, urban watershed to quantify seasonal flushing. Samples were collected every 15 min during the 1997‐1998 wet season from the Santa Ana River and analyzed for total suspended solids. Initial storms of the season generated event mean concentrations 3‐10 times the event mean concentration of storms later in the season. Cumulative flow‐weighted mean concentrations were calculated as the season progressed. Early season storms discharged only 6% of the annual volume, but influenced flow‐weighted mean concentrations well past the midpoint of the wet season. Mass‐based estimates also indicated a disproportionate load in the early portion of the year; over 52% of the annual load was discharged in the first 30% of the annual volume from the highly urbanized lower watershed. Other stormwater pollutants, including six trace metals (Cd, Cr, Cu, Pb, Ni, Zn), were highly correlated with total suspended solids and also exhibited a significant seasonal flush.     

论长江洪灾与可持续发展

本文分析了湖北等省份多年水灾资料，并对水灾的成因进行了研究，提出了根治水灾必须走可持续发展道路的建议     

The significance of various factors for GHG emissions of buildings

The objective of the research was to create improved understanding of the significance of diverse factors for the total greenhouse gas (GHG) emissions of buildings. The specific focus of the study was on the assessment of the significance of building materials and embodied carbon. The scope of the study covers multi-storey residential buildings in Finland. This research was based on a literature survey and supported by a parametric case study. The parametric study assessed the building-material-related GHG emissions relative to total GHG emissions and the possible range of variation. The research assesses the minimum and maximum GHG emissions for production of buildings with similar spaces, to reveal the likely range of variation for the emissions. The calculations for the ‘minimum’ and ‘maximum’ scenarios assume a similar purpose of use, occupancy and spaces in the building, while the production methods, materials, site conditions and location are varied. The research also assesses the relative importance of various building components and other calculation parameters in terms of GHGs. Total material-related GHG emissions were compared with the GHG emissions caused by the operation of the building, at three distinct levels of energy performance. In addition, the material- and operation-related GHG emissions were compared with the location-related GHG emissions arising from people's mobility.     

The role of learning in sustainable communities of practice

This paper adds to the literature on skills for sustainable communities by examining the role and processes of learning in “communities of practice” that exist within a “grassroots association”. Interviews were conducted with participants in the communities of practice of a student group called Green Action, which engages with environmental issues in practical ways. The findings demonstrate how learning occurred in the communities of practice, how participants gained skills and knowledge for sustainable consumption, and how learning in the communities of practice appeared to help Green Action to sustain itself in the long-term. This paper could serve as a useful demonstration to others as to how to apply the theories and concepts from the literature on communities of practice when researching skills and knowledge for sustainable communities. It also has some value for grassroots associations themselves in understanding their own activities.     

Geomorphic and Ecological Consequences of Riprap Placement in River Systems

Riprap, consisting of large boulders or concrete blocks, is extensively used to stabilize streambanks and to inhibit lateral erosion of rivers, yet its effect on river morphology and its ecological consequences have been relatively little studied. In this paper, we review the available information, most of it culled from the “grey” literature. We use a simple one‐dimensional morphodynamic model as a conceptual tool to illustrate potential morphological effects of riprap placement in a gravel‐bed river, which include inhibition of local sediment supply to the channel and consequent channel bed scour and substrate coarsening, and downstream erosion. Riprap placement also tends to sever organic material input from the riparian zone, with loss of shade, wood input, and input of finer organic material. Available information on the consequences for the aquatic ecosystem mainly concerns effects on commercially and recreationally important fishes. The preponderance of studies report unfavorable effects on local numbers, but habitat niches created by openings in riprap can favorably affect invertebrates and some small fishes. There is a need for much more research on both morphological and ecosystem effects of riprap placement.     

Prediction of Total Sediment Load in Sand‐Bed Rivers in Korea Using Lateral Distribution Method

A new method for numerically predicting the total sediment load in a river is proposed. The method can be used to predict the total sediment load with information on channel geometry and slope, flow, and bed materials. The conventional method uses a 1D approach that assumes the channel has a wide rectangular shape. However, the proposed method computes depth‐averaged velocity over the width and predicts the total sediment load based on the flow computations. The new method, therefore, is expected to predict better if the flow changes significantly in the lateral direction. The proposed method was applied to three large sand‐bed rivers in Korea, where information is available regarding suspended sediment. Five formulas were tested of use in making total sediment load computations, namely Engelund‐Hansen's, Ackers‐White's, Yang's, Brownlie's, and Karim's formulas. The predicted total sediment loads are compared not only with measured data but also with results calculated using the 1D approach. Discrepancy ratios between the predicted and measured total sediment loads are given and the results are discussed.