不同环境体系下锂离子电池热失控特性实验研究

针对锂离子电池热失控引发的航空运输安全问题,自主设计并搭建锂离子电池热失控灾害演化及危险性分析实验平台。在敞开和密封环境体系下,对电加热触发荷电量(State of Charge,SOC)为0%、50%和100%的18650型锂离子电池热失控规律进行了实验研究。观察单体锂离子电池在敞开和密封体系中的热失控现象,并记录单体锂离子电池热失控时间、温度峰值及相应的温度变化。数据结果显示,相比敞开体系,密封体系有效的延缓了锂离子电池发生热失控的时间,并降低了锂离子热失控时释放的能量,为锂离子电池的航空运输安全性研究提供了理论依据和工程技术参考。     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

热活化镁砂的表征、吸附性能及其对含油废水的处理效果研究

通过对镁砂进行改性试图提高其吸附性能,并用于处理含油废水。对镁砂进行热活化处理,并对处理前后的镁砂进行了X射线衍射分析、TG-DSC热分析及扫描电镜分析。再将热活化后的镁砂用于处理模拟含油废水,考察了焙烧温度、吸附剂用量、pH、温度等因素对模拟含油废水中COD去除效果的影响。根据实验结果,确定镁砂的热活化温度为500℃,利用热活化后的镁砂吸附去除模拟含油废水中的COD,处理后出水COD浓度可满足GB 8978—1996《污水综合排放标准》一级标准。     

固体云爆剂热分解性能研究

目的研究固体云爆剂的热分解特性。方法利用差示扫描量热(DSC)和热重分析(TG)测定该固体云爆剂的热分解过程。分别得到固体云爆剂在不同温度下的DSC和TG曲线,以及同一温度下云爆剂不同组分的DSC和TG曲线。结合线性回归分析的方法,利用Ozawa法、Starink法以及Kissinger法计算了反应活化能。结果其表观活化能为208 k J/mol左右。结论该固体云爆剂的热分解是一个连续的过程,具有良好的安定性。     

关于医疗垃圾飞灰中二噁英在惰性气氛下的低温热脱附研究

以医疗垃圾焚烧炉布袋除尘器前管道内飞灰(BG)及布袋除尘器后飞灰(AG)为对象,研究不同温度及时间段下其在管式炉中的热脱附特性.结果表明,在低温氮气气氛下,热脱附作用较为明显,2种飞灰中的二噁英都有了不同程度的脱除,其中布袋前飞灰中二噁英的脱除率为82.9%～99.9%之间,毒性当量脱除率为77.3%～99.8%,布袋后飞灰中二噁英的脱除率为66.8%～99.8%之间,毒性当量脱除率为43.5%～99.6%.检测收集到的实验尾气,发现了二噁英的存在,且在300～350℃这个温度段生成量最多,且生成的有毒二噁英同系物中以OCDD为主.通过比较发现,当温度为400℃,加热时间为45 min时2种飞灰中的二噁英脱除效率最高.鉴于惰性气氛下的热脱附对处理飞灰中的二噁英具有较好的作用,可将其大规模应用于实际工程中.     

单光子/光电子在线质谱实时分析聚氯乙烯热分解/燃烧产物

实验室研制了低能光电子磁场增强电离(MEPEI)和单光子电离(SPI)复合电离源,该电离源具有电离化合物范围宽、碎片离子少、质谱图简单等优点,结合飞行时间质谱(TOF-MS)实现了聚氯乙烯(PVC)热分解/燃烧产物的在线分析.针对不同的目标化合物,MEPEI/SPI复合电离源通过调节电离区电场强度,可以快速在SPI和SPI-MEPEI之间切换.PVC热分解/燃烧产物中电离能大于光子能量(10.60 eV)的HCl和CO2(12.74 eV、13.77 eV)利用MEPEI模式电离;而烯烃、二氯乙烯、苯系物、氯苯、苯乙烯、茚满及萘系物等可通过SPI-MEPEI复合模式电离.通过实时监测PVC主要燃烧产物的信号强度随温度的变化趋势可推断出,PVC燃烧产物主要是通过两种机制生成:①250～370℃时,PVC发生脱氯及分子内环化反应,产生大量的HCl、苯和萘;②380～510℃时,PVC发生分子间交联反应,生成烷基芳烃,如甲苯和二甲苯/乙苯等.实验结果表明,SPI/SPI-MEPEI复合离子源TOF-MS分析速度快,应用范围广,在在线分析中具有广泛的应用前景.     

Investigation of low-molecular weight organic acids and their spatiotemporal variation characteristics in Hongfeng Lake, China

The identities and concentrations of low-molecular-weight organic acids (LMWOAs) were determined by ion chromatography throughout a 20-m water column in Hongfeng Lake, China. The spatiotemporal variations of LMWOAs and their contributions to dissolved organic matter (DOM) in a research period of 24 hr were also investigated. The results demonstrated that five LMWOAs (lactic, acetic, pyruvic, sorbic, oxalic acid) were detected, and their total concentration and proportion in DOC were 6.55 μmol/L and 7.47%. Their average levels were 2.50, 0.65, 2.35, 0.96 and 0.09 μmol/L, respectively. LMWOAs were higher during daytime (10:00-18:00 on Jun 13, 2008) than nighttime (21:00-6:00 the next morning), in particular 4.99 μmol/L high in the epilimnion ( 1 m water depth), reflecting the fact that direct import from terrigenous sources and photochemical production from humic materials were dominant during LMWOAs’ origin and accumulation. The same factors caused LMWOAs to be 0.63 μmol/L in the epilimnion higher than in the hypolimnion. The rapid decrease of total organic acid (TOA) up until 18:00 mainly resulted from bio-uptake and mineralization in the hypolimnion (>1 m water depth). Pyruvic acid increased with time in the epilimnion and decreased in the hypolimnion, largely related to the two contrary processes of continuous degradation and synthesis of macromolecular organic matter during life materials’ cycle mediated by organisms. Simultaneously, plankton behavior and thermal stratification played a pivotal role in LMWOAs’ behavior in the water column, causing decreasing and increasing profiles. The distribution of LMWOAs represents an interesting resource for biogeochemical research of DOM in aquatic ecosystems.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

热脱附-气相色谱-质谱法测定环境空气中5种挥发性卤代烃

建立热脱附-气相色谱-质谱联用测定环境空气中三氯甲烷、四氯化碳、三氯乙烯、四氯乙烯、溴仿等5种挥发性卤代烃的分析方法。该方法在一定浓度范围内工作曲线线性良好,相关系数均在0．9990～0．9998之间,加标回收率在94．0％～106．6％之间,RSD为2．18％-7．62％,检出限为0．22μg／m3～0．30μg／m3。该方法具有操作简单、分析快速、准确度高、灵敏高的特点,用热脱附-气相色谱-质谱联用测定环境空气中5种挥发性卤代烃,结果令人满意。     

硫酸羟胺的自加速分解温度和稳定性研究

通过快速筛选热分析试验对硫酸羟胺热危险性进行定性分析,对其热分解过程进行初步研究,获得温度、压力变化规律;再运用C80微量热仪对硫酸羟胺进行深入分析,得到硫酸羟胺的化学反应动力学参数,根据Semenov模型计算其自加速分解温度（SADT）。试验结果表明：由RSD初步筛选试验得到硫酸羟胺在164．2℃时即发生分解放热;用C80法得到硫酸羟胺的起始热分解温度为137．1℃,并计算了该物质在3种典型包装下的自加速分解温度。由SADT得到储存、运输过程中硫酸羟胺的控制温度,从而为减少硫酸羟胺事故的发生提供必要的参考数据。