基于强度折减法的港珠澳大桥沉管隧道干坞工程高边坡稳定性分析

在列举和分析比较当前岩土工程领域边坡稳定性分析的各种主要方法的基础上,概述了强度折减法的基本原理、主要特点和优势,并以港珠澳大桥沉管隧道干坞大型临时工程拟建场地的岩质高边坡为实例,应用强度折减法基于FLAC3D软件对该边坡的稳定性进行了计算和分析,确定了边界条件和强度参数,计算了该边坡的安全系数,结果表明自然工况下边坡处于稳定状态,底部开挖以后边坡趋于欠稳定状态,同时指出了边坡的关键变形部位,可为后续的设计和施工提供参考。     

基于GH-B强度准则的节理岩质边坡稳定性分析

在岩质边坡工程数值模拟计算分析中,其难题之一就是如何较准确地确定岩体强度参数,而边坡岩体抗剪强度是影响计算分析成果的控制因素,也是支护设计成败的关键所在。采用GH-B强度准则对深水河大桥4号桥墩边坡进行了稳定性分析,同时与采用M-C强度准则的模拟结果进行了对比分析。结果表明:GH-B强度准则采用基于应力水平的塑性流动法则,更好地体现了节理岩体的变形和破坏机理,可有效反映岩体的非线性破坏特征,更加接近于工程实际,适于节理岩体的强度计算及稳定性分析。     

一种新型电化学法处理硝态氮废水的初步研究

通过对Pd-Me双金属催化还原NO 3--N和折点氯化法处理NH 4+-N的相关理论分析,提出了一种基于电化学法的新型NO 3--N废水处理工艺.即利用具有电子空轨的常见金属元素修饰Ti基获得催化阴极,在电场的作用下,将NO 3--N催化还原;通过调整催化元素的配比和电解条件,控制NO 3--N还原产物主要为NH 4+-N;利用阳极氧化Cl-生成高氧化性物质HOCl,将NH 4+-N氧化为无害产物N2-N.结果表明,金属元素Co和Cu修饰Ti基制得阴极可以有效地催化还原模拟废水中的NO 3--N;按前驱物溶液金属元素摩尔比1∶1制得Ti基Co-Cu复合涂层催化阴极,可以将NO 3--N高效催化还原为NH 4+-N;电解体系中引入Cl-后,通过阳极作用可将NO 3--N还原生产的NH 4+-N有效地氧化为N2-N.在100 mg/L NO 3--N模拟废水中添加1 000 mg/L Cl-,设置极板间距6 mm、电流400 mA,电解2.5 h后出水NO 3--N、NO 2--N、NH 4+-N和TN分别为2.9、0.5、1.7和6.0 mg/L.     

Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

基于非线性响应函数和蒙特卡洛模拟的滇池流域污染负荷削减情景分析

为定量了解滇池外海水质对流域污染负荷削减率的响应变化程度,并评估相关决策的潜在风险,在长期的水质模拟结果基础之上,本文使用内嵌非线性响应函数的蒙特卡罗模拟方法,在2个不确定性水平下（5%和10%的变异范围）分析滇池外海为达到3个水质目标情景（Ⅲ类、Ⅳ类和Ⅴ类）的污染负荷削减及其不确定性.模型结果表明,在2种不确定性水平...     

Reducing sulfates concentration in the tannery effluent by applying pollution prevention techniques and nanofiltration

The use of large quantities of sulfuric acid and other sulfur-containing chemicals causes high sulfate concentrations in the wastewater of a tannery. The aim of this work was reducing the sulfate concentration in the final wastewater from a tannery. For that, firstly a study about the main sulfate sources in a tannery was carried out and the total sulfates load in the tannery wastewater was evaluated. Two measures for sulfates reduction were studied: the recycling of unhairing wastewater to the soaking drums and the reuse of the chromium sulfate from the tanning washing wastewater after its separation by nanofiltration (NF). The first measure proposed was studied experimentally in laboratory drums of 5 L of volume. Two series of experiments with different volumes of unhairing wastewater in the soaking bath were carried out. The quality of the final leather was evaluated by means of mechanical tests. NF experiments were carried out in a laboratory pilot plant with a spiral wounded membrane element. Concerning the results, the combination of 50% unhairing wastewater and 50% of fresh water was appropriate in order to obtain leather with an acceptable quality. Besides, it drove to a diminution of approximately 10% in the addition of sulfide in the unhairing. Related to the NF experiments, 97% of the sulfates were rejected by the membrane. The separated ions could be recycled to the tanning drums. The application of the two measures (firstly the recycling of the unhairing wastewater and secondly the NF of the tanning washing wastewater) drove to a reduction of 14.82 kg SO₄⁻² t⁻¹ of raw hide.     

电渗析法再生CO_2电还原电解液的研究

探索了电渗析法再生CO2电还原电解液的可行性。以HCOOK溶液作为CO2电还原反应后的模拟液,采用单室电渗析装置对其进行再生,考察了电流、时间、温度等操作条件对电流效率和再生率的影响,研究结果表明:在常温条件下,操作电流低于极限电流时,采用电渗析法再生CO2电还原电解液具有高的电流效率和再生率。     

Effect of manufacturing methods of AgCl/Al2O3 catalyst on selective catalytic reduction of NOx

The AgCl/Al2O3 catalyst has potential for use in the selective catalytic reduction (SCR) of NOx. A compound hydrocarbon, following oxygenation is used as a type of reducing agent. In this experiment, the AgCl/Al2O3 catalyst was produced by four different methods, and the differences among their reduction catalysis of NOx were compared. Ethanol was used as a type of reducing agent. X-ray diffraction analysis was performed to study the crystalline structure and scanning electron microscope and transmission electron microscope (TEM) were applied to determine the microindentation. The results indicated that, in the range of 350–400°C, there was no significant difference on the NOx reduction rate; however, there was dispersion at high and low temperature ranges. The size of the AgCl particles was about 20–100 nm.     

臭氧处理循环冷却水节能减排效益分析

文章基于臭氧(O3)处理法处理循环冷却水因可以同时达到阻垢脱垢、缓蚀、杀菌等多重功能,其在国外已得到广泛应用,同时国内也逐步普及应用的环境下,结合国内外长期的工程实践经验,从节水、节能、减排和公共卫生效益四个方面,详细分析了臭氧处理循环冷却水所带来的巨大经济效益、社会效益和环境效益。     

电厂二氧化碳捕捉技术对比研究

由于全球温室效应的不断加剧,发展二氧化碳捕捉技术变得十分必要.通过分析燃烧前捕捉、燃烧后捕捉和富氧燃烧捕捉三种二氧化碳捕捉方式流程及其特点,指出三种不同的二氧化碳捕捉技术的发展现状以及应用途径.通过具体对比现有二氧化碳捕捉技术的工作原理以及优缺点,针对现有的几种具体的二氧化碳捕捉技术进行详细的分析,积极应用各种物理、化...