流化床焚烧含盐苯胺废液的NOx排放特性

在流化床焚烧实验装置上进行含盐苯胺(C6H5NH2)废液的焚烧实验研究,用IMR-IMR2800P废气分析仪对焚烧尾气成分进行了在线监测,考察了焚烧工艺条件对NOx排放浓度的影响规律.结果显示:采用分级燃烧工艺和提高焚烧温度,可以降低NOx浓度;增大进料速率却导致NOx排放浓度的增加.当过剩空气系数(α)低于1.0时,NOx排放浓度随着α的增大急剧上升;大于1.1时,NOx排放浓度随α增加而减小.苯胺废液高温焚烧时添加氯化钠能降低NOx排放.     

放射性废水的膜处理技术研究进展

核燃料的生产、核电厂的运行、同位素的生产和使用等过程都会产生着大量的放射性废水,为了保护环境和人类健康,这些废水必须经过安全、经济和有效的处理处置.放射性废水传统的处理方法主要包括过滤法、离子交换法、蒸发法或这几种工艺的组合.近年来,膜分离技术在放射性废水处理中得到了广泛的研究,发达国家已有应用膜分离技术处理放射性废水的实例,而我国规模化应用的实例还很少见.本文首先介绍了放射性废水的来源及组成,分析了各种放射性废水处理方法的优势和不足,包括化学沉淀法、过滤法、离子交换法、蒸发浓缩法、吸附法、生物还原/吸附法和膜分离法等.在此基础上,重点介绍了各种膜分离技术,包括微滤、超滤、纳滤、反渗透、膜蒸馏等在放射性废水处理中研究与应用现状,对已有的文献资料进行了较系统全面的分析、归纳和总结,对各种方法的优缺点及适用范围进行了比较,对膜技术在放射性废水处理中的应用前景及问题进行了讨论.最后,简要介绍了放射性废水处理产生的浓缩产物的最终处理处置,对放射性废水处理技术未来的研究和发展方向给出了建议.     

呼和浩特市可镇污水处理厂工程设计

呼和浩特市可镇污水处理厂近期建设规模1.0×104m3/d,远期总规模2.5×104m3/d。污水处理主体工艺采用组合式A2/O生化池+砂滤,污泥处理采用污泥贮池+带式浓缩脱水一体机,尾水采用液氯消毒,设计出水水质执行GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准。介绍了该工程的工艺流程、设计参数,总结分析了工艺设计的技术特点。同时阐述了针对低温条件下的运行保障措施和要求,为寒冷地区同类污水处理厂的设计提供参考和借鉴。     

四环素抗性基因在人工湿地中的去除及累积

以垂直潜流人工湿地系统为试验装置,考察了猪场养殖废水中四环素类抗生素抗性基因(tetW、tetM和tetO)在人工湿地中的去除及累积情况.结果表明,养猪废水中的3种抗性基因均有检出且含量较高,tetW、tetM和tetO的平均绝对含量分别为1.07×1010、4.03×1010和4.92×1010copies.L-1.通过湿地系统处理后,水体中抗生素抗性基因绝对拷贝数和相对表达量均明显降低,tetW、tetM和tetO的平均去除率分别为95.73%、92.21%和95.05%.在系统运行末期,湿地表层土壤和底层土壤中tetW、tetM和tetO的绝对拷贝数和相对表达量均有明显的升高,并且抗性基因在表层土壤中的累积水平高于底层土壤.因此,人工湿地系统可有效降低养猪废水中抗生素抗性基因的绝对及相对含量水平,系统的运行条件可对抗生素抗性基因在湿地系统中的积累产生影响.     

基于物质流分析的钾素流动与循环研究

我国钾矿资源匮乏,自给率低,主要的使用和流动过程集中在种植业活动中.本研究利用物质流分析方法对2009年我国种植业生产和消费过程中钾素的流动和循环过程进行了解析.结果表明,农田土壤钾素平均亏损量达到50.4 kg·hm-2,大量钾素由陆生生态系统进入水生生态系统,造成资源流失.伴随降雨径流进入水环境的钾素达231.2万t·a-1,占当年化学钾肥施用量的40.97%.生活污水排放是钾素进入水体的另一主要途径,城市和农村区域的年排放量分别为67.1万t·a-1和54.7万t·a-1,占进入水环境钾素总量的19.00%和15.50%.其中通过城市污水处理厂排放进入地表水环境中钾素为50.5万t·a-1,占城市区域排放总量的75.25%.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

Application of comprehensive two-dimensional gas chromatography with mass spectrometric detection for the analysis of selected drug residues in wastewater and surface water

Pharmaceutical residues have become tightly controlled environmental contaminants in recent years, due to their increasing concentration in environmental components. This is mainly caused by their high level of production and everyday consumption. Therefore there is a need to apply new and sufficiently sensitive analytical methods, which can detect the presence of these contaminants even in very low concentrations. This study is focused on the application of a reliable analytical method for the analysis of 10 selected drug residues, mainly from the group of non-steroidal anti-inflammatory drugs (salicylic acid, acetylsalicylic acid, clofibric acid, ibuprofen, acetaminophen, caffeine, naproxen, mefenamic acid, ketoprofen, and dicofenac), in wastewaters and surface waters. This analytical method is based on solid phase extraction, derivatization by N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) and finally analysis by comprehensive two-dimensional gas chromatography with Time-of-Flight mass spectrometric detection (GC×GC- TOF MS). Detection limits ranged from 0.18 to 5 ng/L depending on the compound and selected matrix. The method was successfully applied for detection of the presence of selected pharmaceuticals in the Svratka River and in wastewater from the wastewater treatment plant in Brno-Modrice, Czech Republic. The concentration of pharmaceuticals varied from one to several hundreds of ng/L in surface water and from one to several tens of μg/L in wastewater.     

含铬废水的处理技术及机理简述

介绍了废水中六价铬的来源及存在形态,以及处理含铬废水的物理、物化、化学及生物等各种工艺,并对各种工艺的机理和优缺点进行分析,展望含铬废水的治理前景。     

A pilot-scale study of cryolite precipitation from high fluoride-containing wastewater in a reaction-separation integrated reactor

Fluoride removal by traditional precipitation generates huge amounts of a water-rich sludge with low quality, which has no commercial or industrial value. The present study evaluated the feasibility of recovering fluoride as low water content cryolite from industrial fluoride-containing wastewater. A novel pilot-scale reaction-separation integrated reactor was designed. The results showed that the seed retention time in the reactor was prolonged to strengthen the induced crystallization process. The particle size of cryolite increased with increasing seed retention time, which decreased the water content. The recovery rate of cryolite was above 75% under an influent fluoride concentration of 3500 mg/L, a reaction temperature of 50℃, and an influent flow of 40 L/hr. The cryolite products that precipitated from the reactor were small in volume, large in particle size, low in water content, high in crystal purity, and recyclable.     

Biodegradation by bioaugmentation of dairy wastewater by fungal consortium on a bioreactor lab-scale and on a pilot-scale

A fungal consortium including Aspergillus niger, Mucor hiemalis and Galactomyces geotrichum was tested for the treatment of dairy wastewater. The bio-augmentation method was tested at lab-scale (4 L), at pilot scale (110 L) and at an industrial scale in Wastewater Treatment Plants (WWTP). The positive impact of fungal addition was confirmed when fungi was beforehand accelerated by pre-culture on whey (5 g/L lactose) or on the dairy effluent. Indeed, chemical oxygen demand (COD) removal yields increased from 55% to 75% for model medium, diluted milk. While after inoculation of an industrial biological tank from a dairy factory with the fungal consortium accelerated by pre-cultivation in a 1000 L pilot plant, the outlet COD values decreased from values above the standard one (100 mg/L) to values in the range of 50-70 mg/L. In addition, there was a clear impact of fungal addition on the ’hard’ or non-biodegradable COD owing to the significant reduction of the increase of the COD on BOD 5 ratio between the inlet and the outlet of the biological tank of WWTP. It was in the range of 451%-1111% before adding fungal consortium, and in the range of 257%-153% after bio-augmentation with fungi. An inoculated bioreactor with fungal consortium was developed at lab-scale and demonstrated successfully at pilot scale in WWTP.