生物燃气制气供气装置选型计算

根据生物质热解及其干燥所需能量计算,选择一种生物质燃气制气供气装置作为生物燃油生产过程中用于生物质干燥和热载体加热的能量来源,对降低生物燃油规模化生产能耗和生产成本具有重要的研究实践价值和经济意义.     

生物质型煤成型技术开发实验研究

通过原有成型方式的工业成型观察和模压成型实验，提出并验证了完全利用生物质纤维的交联作用实现成型的新机制。其于中高压下物料的不可再压缩性和单向挤压也会导致更高的成型压力的新认识，设计和研制成按新机制成型的型轮。经此改进的工业成型试验达到了比模压成型更好的效果：不用预实送料，且成型性能；成型压力降至120MPa以下，成型许可水分成倍提高，适合的生物质配比范围15％－60％；仅利用送料螺旋的预实功能，即可实现纯生物质型块的成型。     

基于室内PM2.5控制和节能的通风策略探讨

细颗粒物（PM2.5）随空调新风进入室内,和室内产生的PM2.5粒子一起作用,导致人体暴露在室内细颗粒物环境中。为保证室内空气品质,最大限度节约空调系统运行能耗,建立了室内PM2.5浓度与CO2体积分数双组分模型,提出了适用于某会议室不同室内外PM2.5源、不同人数以及不同天气状况下的最佳通风策略,利用Simulink对炎热天气室内有无PM2.5散发源、温和天气室内有无PM2.5散发源4种工况下的不同通风方式进行仿真对比。模拟结果表明：炎热天气存在最小新风量,该值由室内人数决定,过滤送风对控制室内PM2.5浓度效果最好;温和天气存在最大新风量,且该值与过滤器效率成正比;在所研究的情况下,温和天气节能潜力比炎热天气大。     

煤吸附CO2、O2和N2的能力与竞争性差异

应用Materials Studio软件,采用巨正则系综蒙特卡洛方法,依据电厂烟气注入采空区防火与封存实际,对煤吸附CO2、O2和N2的能力与竞争性差异进行分析。由计算结果可知,相比于吸附O2、N2,煤吸附单组分CO2除了范德华能起主要作用,还有很强的静电作用能。由相互作用能和等量吸附热计算结果可知,煤容易吸附CO2,而不容易吸附O2和N2。298.15 K时,CO2对N2和O2吸附选择性及O2对N2的吸附选择性分别为42.396、32.357和1.310,揭示了竞争能力大小为CO2 > O2 > N2。分压分别为CO2 16.5 kPa+N2 79 kPa+O2 4.5 kPa内系统竞争吸附时,受吸附能力、竞争性和分压影响,CO2被大量吸附,而O2吸附抑制。     

Solving Problems in Social–Ecological Systems: Definition, Practice and Barriers of Transdisciplinary Research

Translating policies about sustainable development as a social process and sustainability outcomes into the real world of social–ecological systems involves several challenges. Hence, research policies advocate improved innovative problem-solving capacity. One approach is transdisciplinary research that integrates research disciplines, as well as researchers and practitioners. Drawing upon 14 experiences of problem-solving, we used group modeling to map perceived barriers and bridges for researchers’ and practitioners’ joint knowledge production and learning towards transdisciplinary research. The analysis indicated that the transdisciplinary research process is influenced by (1) the amount of traditional disciplinary formal and informal control, (2) adaptation of project applications to fill the transdisciplinary research agenda, (3) stakeholder participation, and (4) functional team building/development based on self-reflection and experienced leadership. Focusing on implementation of green infrastructure policy as a common denominator for the delivery of ecosystem services and human well-being, we discuss how to diagnose social–ecological systems, and use knowledge production and collaborative learning as treatments.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Minimum ignition energy of LDPE dust/ethylene hybrid mixture

An experimental device for evaluating the minimum ignition energy (MIE) of LDPE dust/ethylene hybrid mixture was built with the innovative mixing mode. The MIE of the hybrid mixture that contained ethylene below its lower explosive limit (LEL) was studied. The result indicated that adding a small amount of ethylene significantly reduced the MIE of the original dust cloud. All the MIEs with five different particle sizes were found to show similar trends of exponential attenuation with the increase of ethylene concentration; such attenuating effect grew as the dust particle size rose. When ethylene concentration increased and approached to its LEL, the reaction mechanism dominated by combustible dust turned into one dominated by combustible gas. The MIE decreased first and then increased with the dust mass and increased with the dust particle size. A multifactor mathematical correlation model of the MIE with the dust particle size and ethylene concentration was developed.     

最小点火能的影响因素及计算误差分析研究

对可燃气体 (液体蒸气 )、可燃粉尘的最小点火能测试中的影响因素进行了分析总结 ,并结合实验分析了求得最小点火能精确值所需要的环境条件和设备设施条件———敏感条件 ;分析了敏感条件下运用常规测试方法和常规计算公式中存在较大误差的原因 ,进而提出了相对准确合理的测试方法及计算公式———直接积分法及拟合近似积分法 ,从而大大降低了误差度 ,获得了比较符合实际的数据。     

基于能位测定和示踪检测法的地下煤火漏风状态研究

应用能位测定法和示踪检测技术联合检测了鸡西老二井火区地下漏风状态。通过测试计算相对总压值得出了火区范围内井巷系统与采空区的风流关系,进而定性确定了火区内老二井与胜利井之间存在的可能漏风路径。在此基础上,利用瞬时释放示踪气体法确定了胜利井和老二井间的漏风方向和漏风速度,计算得出了火区下采空区内平均直线漏风风速为0.13m/s,漏风量为776m3/min。研究结果为矿区采取针对性的防灭火措施提供依据,并为同类问题的解决提供参考。     

隧道竖井外流场模拟及风塔外型结构优化研究

为提高长大隧道施工及运营通风过程中竖井通风效率,实现隧道节能通风。依托实际隧道工程,基于Fluent软件,选用RNG k-ε湍流模型,对无竖井风塔、圆柱风塔、矩形风塔和凸台状风塔4种结构、不同环境风速工况下的流场进行数值模拟,并对模拟结果进行交叉比对分析,提出最优化的竖井风塔结构形式。研究结果表明:采用风塔结构竖井出流量要远大于无风塔结构竖井出流量;对于不同竖井风塔外型结构,竖井出流量与环境风速关系呈多项式函数;当倾斜角为45°、圆心角为90°时,凸台结构对应竖井出流量最大,且受环境风影响波动较小,通风稳定性较好。建议竖井出口结构选用矩形或凸台状,实现对环境风的高效利用,提高竖井通风效率。