排序方式: 共有26条查询结果,搜索用时 15 毫秒
1.
为了探讨Fas/FasL途径在氟暴露致PC12细胞凋亡中的作用及其机制,采用含20、40、80、160mg/L NaF培养液处理PC12细胞.结果表明,所有剂量NaF处理12、24、36、48h,PC12细胞活性升高;上述不同剂量NaF处理24h后,与对照组比,PC12细胞的活性氧水平、细胞凋亡率、细胞内Fas/FasL信号转导通路Fas和FasL、Caspase8、FADD、Caspase3基因和蛋白表达水平均呈显著上升(P < 0.05),而Bid基因和蛋白表达水平显著下降(P < 0.05),且呈氟暴露剂量依赖性.结果提示Fas/FasL途径在氟暴露致PC12细胞凋亡中起重要作用,其中FADD可能是Fas/FasL凋亡途径中的重要靶分子. 相似文献
2.
3.
以SH-SY5Y和PC12细胞为实验模型,深入探讨了代森锰(Maneb)及其代谢产物对多巴胺能神经细胞的毒性影响与机制.结果表明,Maneb的有机部分和金属离子成分单独暴露不具有明显的毒性作用,联合暴露具有协同效应,且对细胞活性的抑制程度与同一浓度水平的Maneb相当,其原因与诱导活性氧自由基生成、细胞凋亡相关.此外,蛋白免疫印迹法发现,Maneb下调Bcl-2的表达、上调Bax、细胞色素C的水平,同时激活Caspase-3,提示线粒体凋亡途径在Maneb诱导多巴胺能神经细胞凋亡过程中的重要作用. 相似文献
4.
基于稳定碳同位素技术的干旱区绿洲土壤有机碳向无机碳的转移 总被引:2,自引:0,他引:2
应用稳定碳同位素技术测定土壤无机碳稳定碳同位素组成(soil inorganic carbonδ13C,SICδ13C),并对干旱区绿洲土壤无机碳进行区分,结合土壤有机碳(soil organic carbon,SOC)与SIC含量关系进一步探讨SOC向SIC转移的碳量.结果表明,4种类型土壤SICδ13C值差异性极显著(P0.01),风沙土SICδ13C值最高且为正,均值为(0.32±0.04)‰,随土层深度增加而增加,说明风沙土原生性碳酸盐占绝对优势;灌漠土、棕漠土和盐碱土SIC的δ13C均值分别(-0.30±0.24)‰、(-1.96±0.66)‰和(-1.24±0.49)‰,随土层变化均呈先降低后逐渐增大的趋势,说明灌漠土原生性碳酸盐占优势,棕漠土和盐碱土发生性碳酸盐相对前者占优势.风沙土、灌漠土、棕漠土和盐碱土的发生性碳酸盐占SIC比例均值分别为1.33%、4.72%、15.01%、35.71%,均小于50%,说明干旱区绿洲土壤发生性碳酸盐比例总体水平较低.风沙土、灌漠土、棕漠土和盐碱土在土壤发生性碳酸盐形成或重结晶过程中固定土壤CO2的量分别为0.30、2.44、4.96、12.40 g·kg~(-1),其中固定来自大气CO2量平均为0.18、0.79、1.45、8.67 g·kg~(-1),来自SOC氧化分解转化为CO2的量分别为0.06、0.83、1.62、1.86g·kg~(-1),说明盐碱土、棕漠土SOC的贡献相对较高,灌漠土、风沙土较低;对土壤固定CO2量的来源比较发现,风沙土、盐碱土固定土壤CO2的量来自大气CO2量较高,SOC的贡献较低,而灌漠土、棕漠土固定来自SOC氧化分解CO2的量较高,大气贡献较低.研究区整体SOC向SIC的碳转移量介于0.03~2.38 g·kg~(-1)之间,平均每千克土壤固定1.09 g的CO2,说明干旱区绿洲土壤发生性碳酸盐所占比例较低,SOC的贡献较少. 相似文献
5.
Optimization of the recovery of plastics for recycling by density media separation cyclones 总被引:1,自引:0,他引:1
Gent Malcolm Richard Menendez MarioToraño Javier Torno Susana 《Resources, Conservation and Recycling》2011,55(4):472-482
Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material. 相似文献
7.
用MTT法及TUNEL法检测醋酸铅对PC12细胞活力和凋亡率的影响,并用荧光标记的特异性caspase-3抑制剂来测量caspase-3的激活.结果显示,PC12细胞暴露于浓度为0.1、1、10、100 μmol·L-1的醋酸铅中24 h后,凋亡率和caspase-3的激活显著增加,并具有剂量-效应关系;当铅浓度达到1 μmol·L-1及以上时,细胞活力明显下降.因此可以推论,铅能够诱导PC12细胞发生凋亡,caspase-3的激活可能在这过程中起了非常重要的作用. 相似文献
8.
Shunli Zhang Eric Forssberg Bo Arvidson William Moss 《Resources, Conservation and Recycling》1998,23(4):225-241
The amount of electronic scrap which contains a substantial portion of non-ferrous metals, primarily copper and aluminum, has been growing. The present study is directed toward aluminum recovery by a newly developed eddy current separator. The investigation on shredded personal computer and printed circuit board scrap demonstrates that the High-Force® eddy-current separator will be applicable for this purpose. It has been shown that, by a single pass of the materials on the High-Force® eddy-current separator, an aluminum concentrate out of personal computer scrap can be obtained with a purity of 85%, while maintaining a recovery in excess of 90%, with the feed rate being up to 0.3 kg/min. 相似文献
9.
为比较不同受火时间后预制空心板剩余承载力、跨中挠度和破坏形态的异同,进行了6块预制空心板受火后力学性能的对比试验研究,其中3块为未受火的对比试件,另3块为板底分别受火23、38、53min的试件。受火试验结果表明,各试件在升温过程中的跨中挠度随受火时间增加而显著增加,熄火自然冷却后,跨中挠度大部分可恢复。加载试验结果表明,对比试件和受火试件的最终破坏模式均为弯曲破坏;随着受火时间延长,试件开裂荷载和破坏荷载均有所降低,且破坏荷载与受火时间大致呈线性关系;受火试件初始弯曲刚度较对比试件明显降低,相同荷载作用下,受火试件受拉边缘拉应变和受压边缘压应变,均明显大于对比试件。 相似文献
10.
Shane Morrin Paola Lettieri Chris Chapman Richard Taylor 《Waste management (New York, N.Y.)》2014,34(1):28-35
Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO2 and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO2’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO2 was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO2 generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling. 相似文献