排序方式: 共有27条查询结果,搜索用时 15 毫秒
1.
烧结烟气应用电子束脱硫脱硝技术之利弊 总被引:3,自引:1,他引:3
介绍了电子束辐照烟气脱硫技术的原理、工艺流程、主要设备及其作用;中国工程物理研究院1.2万m^3/h电子束脱硫脱硝试验装置及试验结论;成都热电厂30万m^3/h脱硫示范装置的设计参数、运行情况;综合分析了烧结烟气脱硫应用电子束辐照烟气脱硫脱硝技术之利弊,认为烧结烟气脱硫应用电子束辐照烟气脱硫技术不失为一个可供选择且可行的技术. 相似文献
2.
利用烧结炼铁工艺环保处理铬渣 总被引:3,自引:0,他引:3
论述了铬渣的产生、组成、特性,利用冶金生产中的烧结炼铁生产工艺对其进行解毒的机理、配加处理铬渣的工艺流程、配加比例和对烧结矿生产工艺参数的影响情况,利用该法对其解毒处理的优势,及解毒处理中防止二次污染和个人防护措施. 相似文献
3.
Juexiu Li Xiaoping He Bing Pei Xianwei Li Diwen Ying Yalin Wang Jinping Jia 《环境科学学报(英文版)》2019,31(3):282-290
Iron ore sintering is a major source of gaseous and particulate pollutants emission in iron smelt plant. The aim of present study is to characterize the volatile organic compounds(VOCs) emission profiles from iron ore sintering process. Both sinter pot test and sinter simulation experiment were conducted and compared. Out results showed that sinter process produced large quantity of VOCs together with NOxand SO_2. VOCs and NO were produced simultaneously in sinter pot test from 3 to 24 min after ignition, flowed by SO_2 production from 15 min to the end of sintering. Total VOCs(TVOC) concentration in sinter flue gas was affected by the coal and coke ratio in sinter raw material. The maximum TVOC concentration was 34.5 ppm when using 100% coal as fuel. Sinter simulation experiments found that the number of VOCs species and their concentrations were found by sinter temperature. The largest VOCs species varieties were obtained at 500 °C. Benzene, toluene,xylene and ethylbenzene were major VOCs in sinter flue gas based on the results from both simulation test and sinter pot. It thus demonstrated that in addition to NO_x, SO_2 and metal oxide particles, sinter flue gas also contained significant amount of VOCs whose environmental impact cannot be ignored. Based on our work, it is timely needed to establish a new VOC emission standard for sinter flue gas and develop advanced techniques to simultaneously eliminate multi-pollutants in iron ore sinter process. 相似文献
4.
5.
6.
垃圾焚烧飞灰烧结过程重金属迁移特性研究 总被引:12,自引:3,他引:9
对垃圾焚烧飞灰烧结处理过程6种重金属(Cd、Pb、Cu、Ni、Cr和Zn)迁移特性开展系统实验研究,烧结实验在高温箱式电炉上进行,着重考察烧结温度、时间、制样压力等条件对重金属残留率的影响.结果表明:Cr残留率随温度升高而显著提高,Cu、Zn残留率随温度升高有所波动;烧结时间对Cu残留率影响显著,对其它5种金属影响不明显;在一定范围内,6种重金属残留率随制样压力增大而提高;Cd、Pb易于挥发,而Cu、Ni、Cr和Zn不易挥发;烧结温度、时间、制样压力对各种重金属残留率的影响程度各不相同;烧结处理可以固化大部分重金属,同时飞灰中重金属在烧结过程中的残留率因种类不同而呈现显著差异. 相似文献
7.
郑永清 《辽宁城乡环境科技》2006,26(2):14-15
烧结厂是大气污染较为严重的工业企业类型之一。在烧结厂建设项目环境影响评价过程中,严格把握国家相关法律法规、产业政策及冶金工业环境保护政策,深入了解铁精矿烧结生产工艺,掌握烧结厂的污染特点,提出切实可行的污染控制措施,对建设项目的环境管理和企业管理及工程设计具有重要意义。 相似文献
8.
烧结烟气脱硫剂性能的研究 总被引:1,自引:1,他引:0
为了提高脱硫效率和合理利用烧结过程中产生的机头灰,在半干法烟气脱硫剂生石灰中,加入一定量的烧结机头灰作为脱硫催化剂。在测定机头灰与生石灰化学成分、粒度和比表面积的基础上,研究和分析了机头灰与生石灰的质量配比对于脱硫效率的影响。结果表明,脱硫剂与机头灰在粒径分布和比表面积上都较接近,但经过消化活化后的混合脱硫剂的比表面积明显增大。当机头灰添加量为脱硫剂质量的2%~5%时,脱硫效率提高了2%~3%。机头灰与生石灰的胶凝反应以及机头灰中Fe2O3的催化作用是主要的作用机理。 相似文献
9.
10.