高压脉冲电解处理难生物降解印染废水的技术和应用

我厂的纺织印染废水净化设备，通过改进以后，主要仍虚用于纺织印染废水，并开始拓展到皮革染色废水、造纸(再生纸)废水等处理上应用．     

用MnSO4-Ce(SO4)2协同催化快速测定COD的研究

本文探讨了以MnSO4-Ce(SO4)2复合催化剂代替标准重铬酸钾法中的Ag2SO4，用密封消解法测定废水COD值的可行性，研究了复合催化剂总量、配比、消解时间、溶液酸度等因素对COD测定的影响。通过对各种废水COD值的测定表明，用MnSO4-Ce(SO4)2做催化剂，在165℃，较低酸度，密封消解15min是可行的。     

Biological pretreatment of Yellow River water

Bio-ceramic filter(BF) and moving-bed biofilm reactor(MBBR) were used for biological pretreatment of Yellow River water in this study. The BF only had slight advantage over MBBR for TOC and ammonia removal. However, like UV254, the average removal rate of THMFP in the BF was much higher than that in the MBBR. UV254 removal did not show obvious correlation with trihalomethane formation potential(THMFP) removal. Hexachlorocyclohexane could be effectively removed in both BF and MBBR. As for diatom and cyanobateria removal the MBBR had better performance than the BF, which was contrary to the average chlorophyll-a(Chl-a) removal rate. The proposal was made in this study that biological flocculation and sedimentation of sloughed biofilm should play a more important role on algae removal in the MBBR than in the BF. The BF and MBBR could effectively remove microcystins. Moreover, MBBR could be a promising technology for biological pretreatment.     

用于燃料电池的甲醇水蒸气重整反应制氢的研究

研究了甲醇水蒸气重整制氢反应过程中各种因素对Cu／ZnO／Al2O3催化剂的活性和选择性的影响。结果表明：Cu／Zn比为2．0的催化剂在250℃反应时，催化剂效果较好，最合适反应条件是：压力0．1MPa，温度250℃，n(H2O)：n(CH3OH)=1．0-1．2，液体流速0．1mL／min。在Cu／ZnO／Al2O3)，催化剂上，甲醇水蒸气重整、甲醇分解和水气转换反应随反应条件的不同而发生相互抑制或促进作用。     

洗煤厂洗煤车间除尘系统设计

通过洗煤车间除尘系统工程实例 ,阐述了在老厂房巧妙利用厂房结构 ,将吸尘罩设计为内开外密 ,负压作业的三级密闭形式 ,从而实现全面通风换气与局部通风除尘的设计思路。工程实践表明 :该设计可使尘源附近 (411机尾走廊 )空气中粉尘净化效率达到 81 16 %～ 94 93% ,对厂房主要作业点空气中粉尘净化效率达 6 0 %以上 ,为洗煤行业老厂房的防尘除尘工作探索了一条可行的途径