Adsorption characteristic of bensulfuron-methyl at variable added Pb^2＋ concentrations on paddy soils

The combined pollution of heavy metal Pb²⁺ and bensulfuron-methyl (BSM), originating from chemical herbicides, in agroecological environments has become commonplace in southern China. The adsorption of BSM on three paddy soils in the presence of Pb²⁺ was examined using high-performance liquid chromatograph (HPLC). Results indicated that adsorption of BSM could accurately be described by a Freundlich isotherm equation with correlation constant (R) > 0.98, irrespective of the presence of spiked Pb²⁺. Of the various factors influencing BSM sorption, soil pH appeared to be the most influential. The constant K_f of Freundlich isotherm equation tended to increase with increasing Pb²⁺ concentration in soil which indicated that the spiked of Pb²⁺ in paddy soils would promote the sorption of BSM. ΔG^θ of BSM in three paddy soils was less than 40 kJ/mol in all treatments, indicating the adsorption of BSM is mainly physical in nature. The elution of soil dissolved organic matter (DOM) enhanced the adsorption of BSM in paddy soils. The mechanisms involved in the promotion effects of the spiked Pb²⁺ on BSM adsorption might be the modified surface characteristics of paddy soil solids due to the soil acidification and the increase of soil organic matter concentration because of DOM binding.     

Analysis of diffusion-adsorption equivalency of landfill liner systems for organic contaminants

The equivalence between multilayered barriers regarding diffusion and adsorption is analyzed by means of an analytical method. The bottom boundary of the liner system is defined by assuming concentration continuous and flux continuous conditions of the contaminant between the bottom liner layer and the underlying soil. Five different liner systems were compared in terms of solute breakthrough time. The results of the analysis show that breakthrough time of the hydrophobic organic compounds for a 2-meter-thick compacted clay liner (CCL) can be 3-4 orders of magnitude greater than the breakthrough time for a geosynthetic clay liner (GCL) composite liner. The GM/GCL and GM/CCL composite liner systems provide a better diffusion barrier for the hydrophilic organic compounds than that for the hydrophobic compounds due to their different Henry's coefficient. The calculated breakthrough times of the organic contaminants for the Chinese standard liner systems were found to be generally greater than those for the GCL alternatives, for the specific conditions examined. If the distribution coefficient increases to 2.8 for the hydrophobic compounds or 1.0 for the hydrophilic compounds, the thickness of the attenuation layer needed to achieve the same breakthrough time as the standard liner systems can be reduced by a factor of about 1.9-2.4. As far as diffusive and adsorption contaminant transport are concerned, GM or GCL is less effective than CCL.     

利用Google Earth研究构造对喀斯特地貌的控制和对碳酸盐岩岩系风化成土的影响

通过互联网Google Earth欧洲卫星图像资料的观察,发现贵州喀斯特地区碳酸盐岩风化成土能力与地层岩性、构造和地貌等密切相关。二叠系生物礁石漠化显著,成土能力差;三叠系大冶组薄层灰岩成土能力高,很少有石漠化;地层倾角大的碳酸盐岩区,石漠化不显著;地层平缓的碳酸盐岩区,石漠化强或中等,碳酸盐岩风化成土能力中等。另外,大型节理带对碳酸盐岩风化成土具有明显的控制作用,节理带碳酸盐岩溶蚀相对强烈,常形成低洼地形,碳酸盐岩风化成土速率较高,红粘土堆积相对厚,不容易石漠化;而节理带间的区域往往地形较高,是石漠化易发育的区域。     

垃圾防渗粘性土对多环芳烃菲(PHEs)的吸附作用研究

研究了持久性有机污染物多环芳烃菲(PHEs)在垃圾防渗粘性土中的吸附机理规律及其吸附模型,探讨了pH值及土样颗粒等影响因素对吸附效果的作用机制,提出了垃圾填埋场防渗粘性土的优化设计。结果表明:菲在粘性土中的吸附过程包括4个阶段,达到吸附平衡的时间为9h;吸附等温线符合Freundlich模型,相关系数为0.98,属于非线性等温吸附;菲的水-土分配系数Kd为0.01,有机碳和水之间的分配系数为14.29;当pH值7.42时,土样对菲的吸附量随pH值的增大而迅速增大;pH值7.42的酸性环境中,对菲的吸附量也变大,但是随着酸性的加强,当pH值6.74之后,吸附能力不再有明显变化;菲的最大吸附量与土体的粘粒含量、比表面积呈正比,由大到小顺序为粘性土粉质粘土细砂。     

数控碟式液限仪的研制与应用

研制了一种与手动碟式液限仪基本原理一致的数控碟式液限仪,它是在手动碟式液限仪上设计安装了标准击打速率等若干数控电路,从而消除了手动碟式液限仪人工操作容易产生的误差,且样机结构设计及使用性能均能达到预定设计目标;经数控碟式液限仪与手动碟式液限仪的对比试验显示,数控碟式液限仪测定黏性土液限指标符合精度要求;该仪器为试验效率的提高、人员操作智能化程度的增强、试验劳动强度的降低创造了有利条件。     

有机修饰土对苯酚的吸附动力学

以十六烷基三甲基溴化铵单一修饰（CB）和十六烷基三甲基溴化铵+十二烷基磺酸钠混合修饰（CS）土耕层和黏化层土样,采用批处理法通过不同的速度参数研究了修饰土样对苯酚的吸附动力学特征,并对其机制进行了探讨.结果表明,在2个温度下,土两层次修饰土样吸附苯酚的总吸附速度V_t和快速吸附反应速度V_f在低添加浓度下分别为2.64～3.31 μg·(g·h)^-1和39.19～61.23 μg·(g·h)^-1,在较高添加浓度下分别为13.09～16.30 μg·(g·h)^-1和247.87～325.64 μg·(g·h)^-1,耕层土样V_t、V_f的大小顺序均为100 CB>120 CS>50 CB>CK,而黏化层土样均为100 CB>50 CB>120 CS>CK.结果证实土两层次土样的有机修饰能够显著加快对苯酚的吸附速度.苯酚的吸附反应分为快速反应和慢速反应2个阶段,总吸附反应以快速吸附反应为主,与快速反应有关的不同速度参数之间具有良好的相关性,而慢速吸附反应则影响不大.修饰土样快速反应和慢速反应的转折时间均小于2　h,且与吸附速度呈现相反的大小顺序.黏化层修饰土样对苯酚的吸附速度高于耕层修饰土样.吸附温度的升高、苯酚添加浓度的提高均可以加快修饰土样对苯酚的吸附反应速度.指数Ⅱ型动力学模型是描述修饰土样吸附苯酚的最佳模型.拟合参数A值与快速吸附反应相关的各项速度参数具有良好的相关性,而模型参数-B与转折时间具有良好的相关性,-B可以作为描述吸附反应速度的特征参数.修饰土样对苯酚的吸附机制以有机相对苯酚的疏水吸附为主.     

基于不同土壤数据单元法的DNDC模型对太湖地区水稻土CH4排放模拟研究

利用农业土壤痕量气体排放模型DNDC(DeNitrification-DeComposition),以整个太湖地区37个县234万hm2水稻土为例,分析了3种不同土壤数据单元法对CH4排放模拟的影响.其中,1∶5万图斑单元法土壤属性来自1∶5万土壤数据库,图斑为最小模拟单元;1∶5万"县级"单元法土壤属性也取自1∶5万土壤数据库,"县"为最小模拟单元;1∶1 400万"县级"单元法土壤属性取自国内同类研究使用最多的1∶1 400万土壤图和《中国土种志》,"县"为最小模拟单元.结果表明,虽然1∶5万图斑单元法大多数县的CH4排放量都在1∶5万"县级"单元法最大与最小值范围之间,但整个地区总排放量(以C计,下同)相差达到1 680 Gg;而1∶1 400万"县级"单元法CH4排放量与1∶5万图斑单元法相比,尽管整个地区总排放量只相差180 Gg,但各"县级"单元之间的估算差异却很大,这一方面说明了土壤数据的详细程度是保证地球生物化学模型模拟精度的重要因子,另一方面也说明在区域CH4排放量估算模拟中使用更详细的土壤资料是非常必要的.     

洞庭湖平原典型水稻土氮素固持动态及氮的残留形态

以洞庭湖平原2个典型水稻土（红黄泥和紫潮泥）为对象,采用¹⁵N示踪技术,研究了淹水培养条件下稻草+硫铵配施（S+¹⁵NA）和单施硫铵（¹⁵NA）土壤微生物和粘土矿物对化肥氮的固定与释放及氮的残留形态.结果表明,淹水培养条件下B_N（SMBN）总体变化趋势是在培养前期达到峰值,而后逐渐下降,最后趋于稳定.固定态铵在整个试验期间变化相对较小,但也随培养时间的延长而减少.淹水培养条件下, B_N 以原有B_N为主.标记底物B_N的比例红黄泥为0.30%～6.67%;紫潮泥为1.00%～3.47%.微生物同化的标记底物硫铵氮的比例红黄泥为0.15%～20.65%,紫潮泥为2.06%～15.93%;有机无机配施处理(S+¹⁵NA)均大于单施化肥(¹⁵NA),红黄泥S+¹⁵NA处理平均为6.78%,高于红黄泥¹⁵NA处理;紫潮泥S+¹⁵NA处理（10.78%）也高于紫潮泥¹⁵NA处理.粘土矿物对标记底物氮的固定率,红黄泥为2.48%～10.57%,紫潮泥为12.55%～30.04%.红黄泥S+¹⁵NA处理平均为7.14%,低于红黄泥¹⁵NA 处理;紫潮泥S+¹⁵NA处理（21.53%）也低于紫潮泥¹⁵NA处理.淹水培养条件下底物硫铵氮的残留率均大于30%,有机无机配施处理提高了无机氮的残留率.红黄泥底物氮的残留形态主要为酸解有机氮（>72%）,而紫潮泥以酸解有机氮(44.0%～53.2%)和固定态铵(35.2%～37.5%)为主,两种土壤底物氮矿质氮形态残留在10%～20％之间.研究表明土壤对外源无机氮的固定与释放是一个动态的过程,施肥方式和土壤粘土矿物组成对该过程有重要影响.化肥和秸秆配合施用能增强微生物对无机氮的同化,降低土壤粘土矿物对无机氮的固持.有机无机配施处理在降低化肥氮损失的同时提高了酸不溶性氮态的残留率,降低了无机氮形态(固定态铵和矿质氮)的残留.