琉基纤维素对水中Cr(VI)离子的吸附研究

制备了巯基纤维素并用其对含Cr(VI)离子的溶液进行了静态吸附实验.研究了pH值、吸附时间、反应温度、吸附剂用量等因素对吸附性能的影响.结果表明:在pH值为2、Cr(VI)浓度为50 mg/L和吸附剂为0.5 g时,常温条件下吸附6h后,Cr(VI)去除率达到99.2%,吸附反应符合Langmuir和Freundlic...     

粉煤灰基质复合滤料吸附Mn^2＋试验研究

以粉煤灰基质复合滤料为吸附材料,通过单因素和正交实验相结合的实验方法,考察了吸附滤料投加量、吸附时间、原水初始浓度、振荡频率、温度等因素对除锰效果的影响。从单因素实验可知：随着滤料质量的增大,Mn2＋去除率在开始时增长幅度较大,后来逐渐趋于平缓。在正交实验中固定滤料投加量为300 g/L,发现在锰离子的吸附过程中,吸附时间的影响最大,随后分别是原水浓度和温度,振荡频率的影响程度最小。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Formation pathways of brominated products from benzophenone-4 chlorination in the presence of bromide ions

The brominated products, formed in chlorination treatment of benzophenone-4 in the presence of bromide ions, were identified, and the formation pathways were proposed.Under disinfection conditions, benzophenone-4 would undertake electrophilic substitution generating mono- or di-halogenated products, which would be oxidized to esters and further hydrolyzed to phenol derivatives. The generated catechol intermediate would be transformed into furan-like heterocyclic product. The product species were p H-dependent,while benzophenone-4 elimination was chlorine dose-dependent. When the chlorination treatment was performed on ambient water spiked with benzophenone-4 and bromide ions, most of brominated byproducts could be detected, and the acute toxicity significantly increased as well.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Origin of major ions in monthly rainfall events at the Bamenda Highlands, North West Cameroon

Rainwater characteristics can reveal emissions from various anthropogenic and natural sources into the atmosphere. The physico-chemical characteristics of 44 monthly rainfall events （collected between January and December 2012） from 4 weather stations （Bamenda, Ndop plain, Ndawara and Kumbo） in the Bamenda Highlands （BH） were investigated. The purpose was to determine the sources of chemical species, their seasonal inputs and suitability of the rainwater for drinking. The mean pH of 5 indicated the slightly acidic nature of the rainwater. Average total dissolved solids （TDS） were low （6.7 mg/L）, characteristic of unpolluted atmospheric moisture/air. Major ion concentrations （mg/L） were low and in the order K＋ 〉 Ca2＋ 〉 Mg2~ 〉 Na＋ for cations and NO3 〉〉 HCO3 〉 SO] 〉 CI- 〉 PO3- 〉 F- for anions. The average rainwater in the area was mixed Ca-Mg-SO4-CI water type. The CI-/Na＋ ratio （1.04） was comparable to that of seawater （1.16）, an indication that N a＋ and CI originated mainly from marine （Atlantic Ocean） aerosols. High enrichments of Ca2＋, Mg2＋ and SO2- to Na＋ ratios relative to seawater ratios （constituting 44% of the total ions） demonstrated their terrigenous origin, mainly from Saharan and Sahelian arid dusts. The K＋/Na＋ ratio （2.24）, which was similar to tropical vegetation ash （2.38）, and NO3 was essentially from biomass burning. Light （〈 100 mm） pre-monsoon and post-monsoon convective rains were enriched in major ions than the heavy （〉 100 mm） monsoon rains, indicating a high contribution of major ions during the low convective showers. Despite the acidic nature, the TDS and major ion concentrations classified the rainwater as potable based on the WHO guidelines.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

乙酰胺低共熔离子液体吸收SO_2的研究

制备了3种乙酰胺-无机盐类低共熔离子液体,测定了其物理性质并将其应用于SO2气体的吸收。结果表明,这些低共熔离子液体具有和传统离子液体相似的性质,例如熔点低、粘度低、密度高、电导率高以及较宽的液态范围。此类离子液体对SO2气体有较好的吸收能力,而且吸收量和温度的关系满足二次多项式方程。红外光谱结果表明吸收是可逆的,回收的离子液体可高效重复使用至少5次。乙酰胺-硫氰酸钠(3∶1)对SO2的质量分数吸收量为0.554 g/g(20℃,1 atm),具有吸收量高、成本低和易回收的优势,是一个很有前景的SO2吸收剂。     

印染前处理节能减排评价模型的建立及应用

针对目前印染前处理工艺,依据评价指标的原则,采用层次分析法从资源指标、环境指标、生产指标及经济指标4个方面建立了印染前处理工艺节能减排综合评价指标体系;提出了基于AHP-Fuzzy方法上的前处理工艺节能减排效果综合评价模型。最后,将该模型应用到印染前处理新工艺中,根据对新工艺相关节能减排指标的监测、核算以及调查,依照隶属函数值计算方法,得到其模糊评价矩阵及其向量,其结果表明,新工艺的节能减排综合评价等级为"优",节能减排效果很好。     

环境样品中甲基汞测定方法的研究进展

甲基汞可通过血脑屏障引起中枢神经系统永久性损伤,毒性很强,因此环境样品中甲基汞的准确测定具有重要意义。文章对近年来环境样品中甲基汞的提取与富集技术及分析测定方法进行了归纳和总结。系统介绍了酸/碱提取、微波/超声辅助提取等样品前处理方法及其溶剂萃取等富集方法。通过比较分析,总结了不同环境样品适用的前处理方法。同时,对各色谱-质谱/光谱联用方法在甲基汞测定时的应用进行了归纳和比较。全自动形态汞/总汞分析仪(MERX)将环境样品中甲基汞的富集与分析有机结合,实现了环境样品中甲基汞的富集和分离与定量分析的一体化,提高了分析效率,是值得推荐的方法。