《环境科学与技术》总目次

<正>~~     

稀土磁盘水处理方案技术经济比较

文章针对日照钢铁集团公司2150热轧水处理工程浊环水处理方案选择,对传统沉淀过滤法和先进的稀土磁盘法进行了对比和分析,稀土磁盘法在效果、占地、投资和运行维护费用上有较多优势,最终选用该工艺。     

空气质量模式发展与应用现状

模式模拟,具有空间和时间分布的连续性特征,有多种化学过程和输送模拟的试验方案可选择等优势,在研究区域大气空气质量研究领域过程中发挥着重要作用。本文系统地介绍了主要空气质量模式在大气环境科学中的重要作用、主要分类及其发展阶段。详细阐述了ISCST3、多维多箱模型、ADMS—URBAN、CAMx及CMAQ等空气质量模式的框架原理、主要特征及其在空气质量管理和规划中的应用,并指出今后模型的发展方向。     

广州地区典型多溴联苯醚迁移和归趋行为模拟

运用多介质逸度模型对典型PBDEs(BDE47、BDE99、BDE209)在广州地区大气、水体、土壤、沉积物中的浓度分布与多介质间的迁移、归趋进行了模拟研究并分析了3种化合物在研究区域环境多介质间的迁移通量,确定其在环境中的主要迁移过程;结合实际监测数据,对模型的可靠性进行验证;以BDE47和BDE209为例,对模型的输入参数进行灵敏度分析;并以BDE209为例,对模型进行不确定性分析.通过模拟浓度与实测浓度的对比,表明模型在该地区具有很好的适用性.结果表明,环境系统达到平衡时,BDE47、BDE99和BDE209在土壤和沉积物中的含量分别占其在环境系统总含量的17.73%和82.26%,14.65%和85.35%,4.81%和95.19%;PBDEs从环境系统中的消失途径主要为大气平流输出和土壤降解;logKow和大气平流输入是影响化合物在环境相中浓度分布的最主要因素;不确定性分析指出BDE209在土壤相中浓度的变异系数最大.     

城市建筑物对周围土壤中多环芳烃含量与分布的影响

为探讨城市建筑物对其周围土壤中多环芳烃(PAHs)含量与分布的影响,对建筑物勒脚或散水边缘(B)和距建筑物5m(B-5)处20个表层土壤样品中16种优控PAHs进行了检测分析.结果表明,B处土壤中∑16PAHs含量为824~8960ng/g,平均为2649ng/g;B-5处土壤中∑16PAHs含量为637~1706ng/g,平均为1297ng/g,B处PAHs含量远高于B-5.各样点主要以4环和5环PAHs为主,B处3环PAHs含量高于B-5处.其中∑4PAHs(Fl、Pyr、InP和BghiP)含量分别占B和B-5土壤中∑16PAHs的48%和45%.参照Maliszewska-Kordybach建立的土壤PAHs污染标准,HJ-5、AJ、AJ-5、EB-5和TC-5属于中等污染程度(600~1000ng/g),其余各样点均属于重度污染(1000ng/g).B处土壤中TOC相对B-5处有富集趋势,B和B-5处土壤中PAHs与TOC无明显的相关性.BaA、Chry、B(b/k)F、BaP、InP和DahA是B和B-5处土壤中TEQBaP浓度的主要贡献者.溯源结果表明B和B-5处土壤中PAHs主要来源于煤炭、汽油和柴油的燃烧;B-5土壤中PAHs部分可能来源于石油类的泄漏.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.     

土壤剖面部分多环芳烃源识别参数的纵向变化及成因

通过对北京和天津地区18条土壤剖面样品中PAHs的分析检测及PAHs的土柱淋滤实验模拟研究,得出了部分反映PAHs污染源的分子标志物参数在土壤剖面(或淋滤土柱)上的纵向变化特征,分析了PAHs化合物的纵向迁移作用对这些参数的影响,讨论了部分用于识别土壤中PAHs污染源的分子标志物参数的有效性。结果表明:在土壤剖面0~50 cm范围内,An/Ph,MPI1,MP/P值均有随深度增加而逐渐降低的趋势,在深层(>50 cm)不同剖面之间这些参数值差别不大;Fl/Py随深度增大呈现一定的波动性,但总体波动范围较小,且在0~40 cm变化不大;C0/(C0+C1)P/A和C0/(C0+C1)F/P值变化较为复杂。土柱淋滤实验表明,在0~50 cm范围内,部分PAHs污染源识别参数(An/178、MPI1、MP/P、C0/(C0+C1)F/P和C0/(C0+C1)P/A等)随深度的变化趋势与自然土壤剖面中的变化趋势基本一致,在深层50~100 cm范围内,这些参数值的大小逐渐与原土中的接近。表明淋滤作用(迁移过程)对表层土及土壤剖面浅部(50 cm范围内)部分PAHs污染源参数值的大小有不同程度的影响,运用PAHs污染源识别参数时,这些参数的有效性应引起足够的注意;而剖面深部(>50 cm)PAHs参数值受表层污染物组成的影响较小,其大小主要反映原土中化合物组成及成因。不同剖面受淋滤作用影响的范围存在一定的差别,这主要取决于土壤中TOC的分布特征。     

北京市东郊河流水中多环芳烃的分布

采用固相萃取-GC/MS测定北京市9条河流的水样中的多环芳烃(PAHs),并对其分布特征和来源进行了分析。结果显示:16种USEPA优控的PAHs均有不同程度的检出,水样中PAHs以2~3环的PAHs为主,占PAHs总量的63.1%~86.8%;水样中PAHs的含量范围为176~1 425 ng/L,其中坝河水样中PAHs含量最高,北运河的最低;市内河流PAHs的污染较郊外河流严重,主要与人类活动,尤其是汽车尾气的排放有关;市内河流通惠河、坝河上游采样点PAHs要明显高于下游,可能与河流稀释作用有关;位于郊外的北运河、潮白河、潮河和白河上游含量要低于下游,很可能与沿途排污及地表径流有关。PAHs的污染来源主要是生活服务区的高温燃烧和汽车尾气带来的石油源污染。     

多层含水层地下水数值模型参数灵敏度分析

为分析多含水层结构地下水数值模型中水文地质参数的影响特征,文章以辽宁阜新某项目区为例,采用地下水模拟软件(GMS)建立具有4层含水层结构的地下水数值模型,并进行拟合校正,选取渗透系数、给水度进行局部灵敏度和全局灵敏度分析。结果表明:渗透系数对模型结果的影响比给水度大;参数变幅为10%时,渗透系数灵敏度是给水度灵敏度的10倍左右;就全局灵敏度而言,参数联合灵敏度大于单个灵敏度之和。