间歇性饥饿对厌氧氨氧化菌混培物保藏特性的影响

厌氧条件下,采用4℃、4℃并每隔10 d换1次NO-2-N/NH+4-N浓度比为1.32的基质、4℃并每隔10 d换1次NO-2-N/NH+4-N浓度比为1.63的基质3种方法保藏厌氧氨氧化菌混培物,研究间歇性饥饿对厌氧氨氧化菌混培物保藏特性的影响.结果表明,间歇性饥饿对厌氧氨氧化菌混培物的危害大于长期性饥饿,且亚硝态氮浓度越高危害越大;另厌氧氨氧化菌混培物活性还与血红素c含量有直接相关性,无外界颜色干扰时厌氧氨氧化菌混培物颜色还可直观反映其活性和血红素c含量,且厌氧氨氧化菌混培物的颗粒结构及其富含的胞外多聚物能增强其抵抗外界不利因素的能力.在试验的5个月内,3种方法下的活性衰减速率均先快后趋于稳定,趋于稳定时的三者活性保留率分别为75.3％、70.8％、62.7％.     

密云水库底泥和库滨区土壤中氨氧化细菌的多样性和丰度

采用分子生物学方法（T-RFLP、定量PCR）研究了密云水库底泥沉积物和库滨带土壤中氨氧化细菌（AOB）的多样性和丰度特征,并使用Canoco for Windows 4.5软件和皮尔森相关系数法,探究了环境因子对AOB群落的影响.结果表明,沉积物和库滨区土壤中AOB的多样性和数量都存在较大的差异.其中,AOB群落被聚成两大类：沉积物与土壤.沉积物样品中AOB群落结构与其它样品差异较大.沉积物中AOB的多样指数最低,而在农田土壤中AOB多样性指数最高.农田土壤中的amoA基因拷贝数最大,是底泥沉积物中的48倍.此外,RDA（Redundancy Analysis）分析表明,在沉积物和水陆交错带土壤中,AOB的优势种与NH₄⁺-N、NO₃^--N、TOC、pH成正相关关系,而在陆相土壤和农田土壤中,AOB的优势种与这些环境因子成负相关关系.其中,TOC是影响AOB的群落结构的关键理化因子.     

有序介孔碳载金/L-赖氨酸/纳米金修饰电极的制备及其对邻苯二酚、对苯二酚的检测响应研究

通过化学还原的方法合成有序介孔碳负载纳米金粒子,并构筑有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰玻碳电极;利用扫描电镜观察介孔碳和介孔碳复合膜的微观结构,并用循环伏安法、电化学阻抗谱表征自组装电极的过程.在此基础上用差分脉冲伏安法研究对苯二酚和邻苯二酚混合物在该电极上的电催化氧化,研制了一种基于有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰电极分别检测对苯二酚和邻苯二酚的传感器.在最优的实验条件下,该传感器在对苯二酚和邻苯二酚浓度为1×10-6～8×10-4mol·L-1的范围内具有良好的线性关系,检出限分别为3×10-7mol·L-1、7×10-7mol·L-1.     

基于臭氧溶胞的活性污泥减量化技术

目前常见的活性污泥减量技术主要包括解偶联技术、微生物的捕食作用以及隐性生长三种方法。基于臭氧氧化溶胞作用从而强化细菌隐性生长的污泥减量技术具有较好的处理效果及良好的应用前景。着重探讨了臭氧溶胞作用的机理及溶胞过程的影响因素。考虑到污泥减量技术在实际污水处理系统中的应用,探讨了臭氧溶胞对污水生物处理系统的影响。     

三槽氧化沟内底推位置与积泥厚度的分析研究

氧化沟工艺由于进水中含有大量的无机颗粒,无机颗粒的沉淀导致沟内积泥较厚。为了不影响正常生产,依据经验数据,依次对1号、2号氧化沟安装底推。对沟内积泥情况及影响因素进行分析比较,得出氧化沟的积泥主要由进水中密度较大的无机颗粒造成,且积泥规律与底推安装位置和运行情况相关。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,     

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

基于单片机的低成本硫化氢监测系统设计

设计了一款基于单片机AT89S52的低成本硫化氢监测报警系统,介绍了该系统的工作原理和设计方法。硫化氢气体浓度由电化学气体传感器ME4-H2S采集,电流信号经I/V转换后送单片机处理并通过LCD显示当前浓度,通过与设定标准浓度进行比较,继而判断是否发出报警。仿真测试表明,该系统结构简单,工作可靠,指示灯颜色显示三级不同警报,可以应用于高温沙漠、下水道、石油天然气钻井作业等恶劣气候、恶劣环境场合。