Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

Modeling the influence of ethanol on the adsorption and desorption of selected BTEX compounds on bentonite and kaolin

The study investigated the effects of ethanol on the adsorption properties of bentonite and kaolin for benzene and toluene removal.     

Fenton氧化在废水处理中的应用

综述了近年来Fenton氧化在废水处理领域的应用状况,对Fenton试剂氧化的机理和主要影响因素:温度、pH、反应时间、H2O2和Fe2+的投加量、H2O2/Fe2+量比以及反应动力学模型进行了简要介绍.最后探讨了Fenton氧化技术在废水处理领域现存不足之处及今后的发展趋势.     

扬州市城区水系补水优化调控技术研究——以二道河为例

以保障城市水体景现,控制城市水体黑臭、控制藻类繁殖为目标,以水体溶解氧为控制性指标,根据各条河道承受的溢流污水、雨水等外源污染和底泥污染释放内源污染,确定各条河道所需的补水量.对扬州市典型的内河(二道河)进行污染调查分析,利用多宾斯-坎普(Dobbins-Camp)BOD-DO水质模型,以COD代替BOD,计算保障河道水质达到V类水质(ρ(DO)≤2 mg/L,ρ(CODMn)≤15 mg/L)需要的补水量.结果表明,多宾斯-坎普水质模型可为扬州城区内河整治工程提供科学决策工具.     

WASP模型应用于城市区域河网水质模拟研究

WASP7.2是美国国家环保局开发的最新的Windows版水质模拟软件。文章以成都市核心城区为例,应用WASP7.2对城市区域河网水质进行了模拟研究。研究的水质指标包括:BOD和NH3-N,并用2005年成都市成都核心城区河网水质实测值对水质模型模拟结果进行校验。研究结果表明:边界断面BOD、NH3-N模拟的平均相对误差分别为1.084%、0.947%;中间断面BOD、NH3-N模拟的平均相对误差分别为0.315%、3.0%。WASP7.2应用于在城市区域河网水质模拟能够取得满意的结果。     

空气质量模式发展与应用现状

模式模拟,具有空间和时间分布的连续性特征,有多种化学过程和输送模拟的试验方案可选择等优势,在研究区域大气空气质量研究领域过程中发挥着重要作用。本文系统地介绍了主要空气质量模式在大气环境科学中的重要作用、主要分类及其发展阶段。详细阐述了ISCST3、多维多箱模型、ADMS—URBAN、CAMx及CMAQ等空气质量模式的框架原理、主要特征及其在空气质量管理和规划中的应用,并指出今后模型的发展方向。     

室内空气质量评价模型探讨

文章按时间顺序介绍了六个评价室内空气质量的数学模型。它们分别是歌舞厅空气质量指标模型、通风条件下室内VOC普适模型、居民住宅甲醛浓度预测模型、办公室甲醛浓度预测模型、通风条件下室内空气品质模型以及多孔建材中VOC扩散系数两尺度模型。针对每一个模型,文章都按照相应的适用条件、建模过程和应用效果进行了综述。目的是总结该领域的最新进展,为当下的检测工作与将来进一步的研究提供参考资料。     

FRP加固震损RC柱建模方法及骨架模型研究

为研究震损RC柱采用FRP(Fiber Reinforced Polymer,FRP)加固修复后的抗震性能,本文基于OpenSees仿真平台,根据震后RC柱的表观损伤状态提出FRP加固震损RC柱的有限元模型建立方法。对FRP加固震损RC柱进行5120种工况的Pushover分析,采用三折线荷载-位移骨架曲线,研究损伤状态对骨架曲线特征点参数的影响规律,并通过数据回归分析提出FRP加固震损RC柱的骨架曲线计算模型。分析结果表明:损伤会降低FRP加固RC柱的承载力及刚度,且降低程度随损伤指数的增大而增加,两者近似成抛物线关系;在DS-5损伤状态下,相比于FRP加固完好RC柱,FRP加固震损RC柱的屈服承载力P y、峰值承载力P c、弹性刚度K 1、弹塑性刚度K 2及下降段刚度K 3的均值下降17.9%、14.5%、41.8%、43.1%和19.9%;损伤对FRP加固RC柱弹性刚度和弹塑性刚度的降低程度明显高于屈服承载力和峰值承载力;文中提出的FRP加固震损RC柱骨架曲线计算模型具有较高精度。     

系统动力学模型在城市发展规划环评中的应用——以山西省临汾市为例

鉴于作为评价对象的城市社会经济环境复合系统具有多目标、多要素、动态关联等突出的系统动力学特征,选择和应用系统动力学方法开展城市发展规划环评在理论上具有可行性和技术优势.作为典型资源型城市的山西省临汾市正面临转变发展方式和加快环境治理的紧迫要求,本文依托该市转型发展规划环评工作,在全面识别和剖析城市发展要素、现状问题及其成因基础上,以经济发展、产业结构、节能减排和环境改善为重点研究了规划要素间的动态反馈关系,以此构建城市转型发展规划环评SD模型,并对4个规划替代方案进行模拟和评价.结果显示,在环境目标刚性约束下所有替代方案均不能实现人均GDP翻番的较高经济增长目标,其中以较强环境约束为特征的"方案III"具有最好的环境与经济综合效果.据此评价建议临汾市应在确保实现环境改善目标的前提下主动放缓工业增长速度,同时加快以"煤焦铁电"为代表的主导产业结构调整并继续加大节能减排力度,全面提高城市可持续发展能力.