Evaluation of adsorption capacities of humic acids extracted from Algerian soil on polyaniline for application to remove pollutants such as Cd(Ⅱ), Zn(Ⅱ) and Ni(Ⅱ) and characterization with cavity microelectrode

The adsorption capacities of new humic acids isolated from Yakouren forest (YHA) and Sahara (Tamenrasset: THA) soils (Algeria) and commercial humic acid (PFHA) on polyaniline emeraldine base (PEB) were studied at pH 6.6. Also the adsorption of heavy metals such as Cd2+, Zn2+ and Ni2+ on humic acid-polyaniline systems (HA-PEB) was investigated at the same conditions. HA-PEB compounds were characterized by scanning electron microscopy (SEM), infrared spectrometry and cavity microelectrode. In addition, batch adsorption and cavity microelectrode were used in the adsorption study of Cd2+, Zn2+ and Ni2+ on HA-PEB. To develop biocaptors of polluting metals using a cavity microelectrode modified by HA-PEB systems, the adsorption kinetic and adsorption capacity were investigated. The SEM analysis showed that the presence of humic acid affected the PEB surface and caused the formation of a granular morphology. The maximum adsorption capacities (qmax) of PFHA, THA and YHA determined by adsorption isotherms were 91.31, 132.1 and 151.0 mg/g, respectively. Batch adsorption results showed that qmax of Cd2+, Zn2+ and Ni2+ on HA-PEB followed the order: THA-PEB > YHA-PEB > PFHA-PEB. The voltammograms obtained with HA-PEB modified cavity microelectrode showed the appearance of new redox couples reflecting the adsorption of HA on PEB. Metal-humic acid-polyaniline voltammograms were characterized by appearance of oxidation-reduction couples or reduction wave corresponding to metal. Finally, the result may be exploited to develop a biocaptor based on the cavity microelectrode amended by THA-PEB and YHA-PEB.     

Effect of anaerobic digestion on the high rate of nitritation, treating piggery wastewater

Laboratory reactors were operated by using piggery wastewater and the effluent of anaerobic digester from piggery wastewater plants to study the effect of anaerobic digestion on nitritation rate.     

铅酸电池的回收处理工艺

本文阐述了铅酸电池的资源化回收利用的工艺技术,通过分析废铅合金板的回收再利用技术及电解液、含铅废水、废气处理工艺的优、缺点探索铅酸电池回收利用技术的发展趋势。     

如何治愈重金属污染顽疾？

从频频发生的“血铅事件”到震惊全国的“镉米风波”,我国重金属污染警钟频频敲响。我国重金属污染正由大气、水体向土壤污染转移,土壤重金属污染已进入一个“集中多发期”,对居民身体健康和农产品安全构成严重威胁。     

简讯

环保部：今年1～8月全国发生11起重金属污染事件 环保部部长周生贤近日表示,损害群众健康的环境问题仍然比较突出。近年来,重金属污染事件呈高发态势。今年1～8月,全国发生11起重金属污染事件,其中9起为血铅事件。在全国排查的4．46万家化学品企业中,72％分布在长江、黄河、珠江、太湖等重点流域沿岸,距离饮用水水源保护区、重要生态功能区等环境敏感区不足1公里的占12．2％。     

福州城市边缘区森林土壤重金属污染特征及评价

为掌握福州城市边缘区森林土壤重金属污染特征,选取10个典型区域作为研究对象,分析森林土壤中Zn、Mn、Cr、Pb、Cu 5种重金属的含量及分布特征,并采用单项污染指数和综合污染指数法对土壤进行质量评价,结果表明:Cr、Pb是该区土壤重金属污染最主要的元素;Zn、Cu、Pb、Cr含量随土层深度增加而减少,Mn则相反;Zn...     

兰州银滩湿地5种植物对重金属吸附能力的分析

利用原子吸收分光光度法测定兰州银滩湿地5种植物及其生长土壤(表层)中Cu、Pb、Zn的含量,结果表明,采样区域表层土壤存在轻度Cu、Zn、Pb污染,其中Cu、Pb的来源或污染途径可能相同,且Cu、Zn、Pb的生物可利用性较低,TCLP生态风险评价显示均小于国际标准值;采样区域表层土壤Cu、Zn、Pb总量与TCLP提取量...     

酸析+臭氧+MBR工艺处理手机显示屏厂废水

哈威特光电技术有限公司是一家生产手机显示屏强化玻璃的企业,主要生产废水为油墨废水、研磨废水、清洗废水,其中油墨废水COD浓度高达8 000～12 000 mg/L,废水呈碱性且可生化性差;污水处理采用酸析+臭氧+MBR工艺,其中酸析法主要对油墨废水进行预处理,臭氧氧化提高综合废水的B/C比,最后进入膜生化装置MBR处理,出水能达到污水综合排放标准(GB8978-1996)的一级标准。     

北方某钢铁厂部分厂区土壤重金属污染的初步调查

对北方某即将搬迁钢铁厂的部分厂区土壤重金属进行了初步调查,主要利用SPSS相关和变异分析、Surfer空间分析及归一化处理对重金属污染的空间分布特征进行了描述。一区污染最为严重,有Hg、Mn、Zn、As、Cr和Cu;二区污染物主要为As、Pb和Zn;三区污染主要有As、Cr和Co;四区污染物有Cr、Co、Mn、Cu和Pb,污染相对较低。研究为调查区域搬迁后的土地规划提供了科学依据。     

磁性膨润土材料吸附处理印染废水研究

针对目前膨润土在应用中的一些问题,对膨润土进行磁性能改性,通过共沉淀法制备磁性膨润土颗粒,并对其进行了X射线衍射和磁性能表征分析.以阴离子染料OrangeⅡ为目标化合物,研究了磁性膨润土材料对OrangeⅡ废水的吸附效果,并探讨了主要工艺参数如阳离子表面活性剂的质量浓度、pH、温度等对染料去除率的影响.结果表明:阳离子...