Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

吸附树脂负载铁酞菁催化降解硝基苯的研究

在可见光照射下,采用吸附树脂负载铁酞菁催化过氧化氢降解硝基苯.考察了光照、催化剂投加量、双氧水投加量、温度及pH值等因素对催化效果的影响.结果表明,在功率为50W卤钨灯照射下,硝基苯溶液初始质量浓度为200 mg/L,初始pH值为3,催化剂投加量为1.5 g/L,双氧水投加量为1.0 mL/L,温度为35℃下反应10h,硝基苯去除率可达到79.9％.     

废旧线路板中主要有价金属的生物反应器浸出研究

为探讨可供实际生物浸出应用的反应器规模废旧线路板中有价金属浸出特性和工艺条件,通过设计序批式生物浸出反应器,采用分离到的氧化亚铁硫杆菌Z1作为菌种资源,在考察废旧线路板中有价金属的浸出特性的基础上,确定了反应器运行的最佳工艺条件.结果表明,反应器运行的最佳工艺条件为曝气量1L/min、停留时间30h、搅拌速率300r/min以及粉末投加量12g/L.在此条件下,经过101h可以浸出90.24%的铜.同时,经197h的浸出,可以溶出93.06%的镁、92.00%的锌、85.59%的铝和64.51%的镍.因此,生物浸出反应器能有效回收废旧线路板中的有价金属,为该技术的实际应用提供了实验证据.     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

铁碳微电解法预处理聚氯乙烯(PVC)离心母液废水

采用铁碳微电解法对聚氯乙烯(PVC)离心母液废水进行预处理。分别考察反应时间、铁粉投加量、Fe/C(质量比)、pH值及曝气速率对母液废水中的COD和聚乙烯醇(PVA)去除率的影响,并在此基础上通过正交实验确定了废水COD的最佳处理条件。结果表明,最佳处理条件为:反应时间为4 h、铁粉投加量为30 g/L、Fe/C为1:2、pH值为2、曝气速率为0.8 L/min。在该条件下,废水中COD、PVA和TOC的平均去除率分别为(67%±2)%、(98%±1)%和(55%±3)%,废水的BOD/COD值从0.3提高到0.5,可生化性得到了显著提高。同时,废水中的NH3-N、浊度也在很大程度上得到了去除,出水中总铁含量也很低。     

高效去除难降解毒害污染物的零价铁技术装备

文章综述了可高效去除硝基芳烃、氯代有机物、毒害重金属等典型难降解毒害污染物的零价铁技术的降解机理及应用效能,重点总结了其技术装备的改良优化与集成强化方式,系统比较了多种技术装备及应用流程的性能优势及应用缺陷。进一步展望了该技术国内外的最新方向及应用前景。     

强化混凝处理低温低浊松花江水研究

针对低温低浊水出水浊度不达标的问题进行了絮凝试验研究。结果表明,投加混凝剂聚合氯化铝(PAC)或聚合氯化铝铁(PAFC),剩余浊度、剩余CODMn均有所降低,继续加大投药量,浊度反而升高。进一步试验表明:在PAFC用量为12 mg/L,改性活化硅酸用量为0.12 mg/L条件下,剩余浊度、剩余CODMn分别达到0.21 mg/L和0.64 mg/L。改性活化硅酸的投加时间对混凝效果有一定的影响,混凝开始后330s投加改性活化硅酸可以提高混凝效果。     

聚合氯化铝铁在矿井水处理中的应用前景展望

针对我国当前矿井水净化处理现状,指出了矿井水混凝处理过程中存在的主要问题,阐述了传统絮凝剂聚合氯化铝的不足之处。根据对聚合氯化铝铁性能、特点以及经济性等方面的详细论述,分析了聚合氯化铝铁在矿井水混凝处理中的优势及应用前景,并对聚合氯化铝铁今后在矿井水处理应用中的发展方向提出了建议。     

地下水中常见离子对纳米零价铁除Se（Ⅳ）动力学的影响

采用间歇实验对纳米零价铁(nZVI)除四价硒(Se(Ⅳ))进行实验性研究,考察了地下水中共存离子对nZVI除Se(Ⅳ)动力学的影响.结果表明,在厌氧条件下,当nZVI投加量为0.1 g·L-1,Se(Ⅳ)浓度为100μmol·L-1,NaCl浓度为0.01 mol·L-1,pH=7.0,T=25℃±1℃时,投加CO2-3或SO2-4浓度为1 mmol·L-1、腐殖酸(humic acid,HA)为5 mg·L-1时,明显抑制了Se(Ⅳ)的去除.投加0.5 mmol·L-1Ca2+或Mg2+时,对除Se(Ⅳ)影响不大;而Ca2+(3 mmol·L-1)、Mg2+(3 mmol·L-1)时,Se(Ⅳ)的去除效率明显下降.未加共存离子时,Se(Ⅳ)在20 min时基本去除完,共存离子存在的情况下,nZVI对Se(Ⅳ)的去除率在30 min时达到100%.反应过程中二价铁(Fe2+)随着Se(Ⅳ)的去除趋于平稳.ORP在反应过程中快速从正值下降至负值,由此说明nZVI除Se(Ⅳ)的过程发生了还原反应.