生物法处理海上油田含聚生产污水研究报告

应用"倍加清"特种微生物技术,结合"气浮+生化+固液分离"的处理工艺,以中海油绥中SZ36-1陆上终端含聚污水为水质样本,研究生物法处理海上油田含聚生产污水的效果。结果表明,该工艺处理后出水可达"1.5.2"的水质标准,远优于"10.10.3"的注入水质指标要求,并确定了相关技术参数。该技术具备处理效果好、适应来水水质范围大、环境友好等优势。但由于空间重量的限制,尚不适用于海上油田平台的生产水处理工艺。     

电感耦合等离子体原子发射光谱法测定电路板中金属含量的方法改进

根据样品中被测元素的特点,采用硝酸-氢氟酸-高氯酸-硼酸-硝酸和硝酸体系,对电路板中金属元素进行消解,用电感耦合等离子体原子发射光谱法对电路板中的金属元素含量进行定量分析。该方法具有简单、准确的特点,可以快速分析电路板中的金属元素含量。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

从化学物质角度看美国有毒空气污染防治工作

从化学物质入手介绍美国有毒空气污染防治的法律基础、污染物选择和评估,以及法规设计的有毒空气污染物污染防治方法的主要内容,并结合中国近期控制挥发性有机物的要求,提出了加强化学品环境管理,协同推进大气环境保护工作的建议。     

深圳市天然γ辐射空气吸收剂量率调查

从2007年至2011年在深圳市进行了天然γ辐射空气吸收计量的调查.调查结果显示：全市天然辐射外照射空气吸收剂量率的变化范围为（4.87 ～17.68）×10^ 8Gy/h,平均值为10.00 ×10^ 8Gy/h,与广东省平均水平相当,稍高于全国平均值,属于正常天然本底范围;天然辐射外照射致深圳市居民人均年有效剂量当量（0.22 ～ 1.08） mSv,低于广东省与全国的平均水平;集体有效剂量当量54.32×10^2man· Sv.     

车载净化器能吹来好空气？

室外空气不好,也影响车内空气质量,不少车主安装车载空气净化器来抵抗雾霾侵袭,希望以此降低车内PM2.5污染。 市场上销售的大部分车载空气净化器都声称具有除甲醛、去异味、除PM2.5等功能。专家指出,大部分车载空气净化器由于受功率等因素制约,去除PM2.5的功能有限,效果不如车载空调的内循环系统。     

利用微型后生动物进行污泥原位减量的试验研究

在A/A/O普通活性污泥工艺中引入非寡毛类微型后生动物考察其生长条件和对剩余污泥的减量效果及对系统处理效果的影响。结果表明,当进水负荷小于0.5 mg(/mg MLSS·d)时,非寡毛类微型后生动物可大量生长;当内回流比升高、外回流比降低时,更有利于虫体的繁殖。经过适时的运行工艺调整可使生化系统虫体密度和稳定性提高,污泥减量效果可达到40%以上。非寡毛类后生动物的活动与摄食作用提高了系统污泥的沉降性能,并对系统出水COD、NH3-N、TN、TP、SS没有影响。。     

2013年1月京津冀地区强雾霾频发成因初探

基于2001-2013年的气象观测数据和环境空气质量监测数据,针对京津冀地区1月同期的雾霾天数、能见度、环境空气污染物浓度等展开分析,结果表明:2013年1月京津冀地区平均雾霾天数发生了21.7 d;污染物浓度超标严重,高浓度的颗粒物成为强雾霾频发的重要原因,PM10月均浓度为0.317 mg/m3,PM2.5为0.219 mg/m3;1月份京津冀地区气象要素表现为地面风速小、相对湿度高、大气层结稳定,更加促进大气污染物累积,并有利于颗粒物吸湿增长,致使空气质量恶化,强雾霾事件频发。     

采用精密度法评定总氮测量不确定度

采用top-down技术中的精密度法对环境水样中总氮的测量不确定度进行了评定。文章利用实验室内期间精密度实验结果、参加能力验证结果和实验室内标准样品的重复性测定结果,对实验室测量偏倚和精密度控制情况进行评估,并在保证实验室的测量过程处于统计受控状态下,参考能力验证的室间标准差作为测量不确定度的估计值。由于这种方法关注实验的整个过程,因此更能从整体上反映实验结果的测量不确定度;并且由于省去了传统bottom-up技术中复杂的实验设计和繁琐的合成计算,应用起来简便易行。