基于TiO2载体的锰铈系低温SCR脱硝催化剂研究进展

开发低温、高活性、高抗硫抗水性能的选择性催化还原(SCR)脱硝催化剂已成为国内外的研究热点。综述了基于TiO2载体的锰铈系低温脱硝催化剂的脱硝性能,探讨了助剂掺杂改性、制备方法、反应条件等对催化剂脱硝性能的影响,总结了现有低温脱硝催化剂的技术难点,指出SCR催化剂的研究需要着重考虑以下几方面:深入研究催化剂的反应机理和中毒机理;研究催化剂的循环再生;探究拓宽催化剂温度窗口,使其适应不同的温度条件。     

活化后钾改性正硅酸锂吸附CO2的性能评价及动力学研究

制备了钾改性正硅酸锂(K-Li4SiO4),并对其进行了自活化,考察了活化后K-Li4SiO4吸附剂在不同温度和CO2浓度气氛中吸附CO2的性能及动力学行为。总体而言,吸附剂的CO2吸附能力随着温度的升高、CO2浓度的增加而提升。在700℃、100%体积分数CO2气氛中吸附剂的吸附量最大,可达7.9 mmol/g,吸附剂的利用率为95.2%。利用双指数模型能够很好地描述吸附剂在各个温度以及各个CO2浓度气氛下的CO2吸附过程。吸附活化能随着CO2气氛浓度的升高而降低,CO2体积分数为20%,50%,100%时的吸附活化能分别为26448,14035,6178 J/mol。     

二氧化碳资源化技术研究进展

过量的二氧化碳(CO2)排放可导致温室效应的不断加剧,因此CO2减排受到越来越多的关注,其中将CO2转化为附加值较高的化工产品,即CO2资源化利用技术不仅可实现CO2减排,同时具有一定的经济效益。CO2资源化利用技术主要包括光化学还原法、电化学还原法和催化转移氢化法等。重点介绍并总结了以上3种方法的特点、优势和不足,指出未来需研究解决的关键问题和研究方向,为实现高效的CO2资源化利用提供借鉴和参考。     

Environmental pollution,hydropower and nuclear energy generation before and after catastrophe: Bathtub-Weibull curve and MS-VECM methods

In this paper, the life span of hydro and nuclear energy generations and the relationship between hydro and nuclear energy generations, environmental pollution, and economic growth were investigated for Japan covering the period of 1960–2018 by employing the Bathtub-Weibull curve and Markov switching-vector error correcting (MSVEC) method, respectively. According to the Bathtub-Weibull curve analysis, a rising failure rate for nuclear energy was found, indicating that the life of nuclear energy has expired, but a decreasing failure rate for hydroelectric energy has been detected. Then two different MSVEC models were used. The MSVEC method, unlike traditional approaches, determines the relationship between variables under different regimes. The results of MSVEC methods indicate three important points. First, regime-dependent asymmetry and regime changes are crucial for policy recommendations. Second, the shocks to hydropower and nuclear energy generations cause temporary deviations from the long-run growth path in both regimes. Lastly, the increase in hydropower generation leads to a decrease in environmental pollution and an increase in GDP, and an increase in nuclear power generation increases pollution and growth in both regimes.     

Photosynthesis and related metabolic mechanism of promoted rice (Oryza sativa L.) growth by TiO2 nanoparticles

• The rice growth was promoted by nano-TiO₂ of 0.1–100 mg/L. • Nano-TiO₂ enhanced the energy storage in photosynthesis. • Nano-TiO₂ reduced energy consumption in carbohydrate metabolism and TCA cycle. Titanium dioxide nanoparticle (nano-TiO₂), as an excellent UV absorbent and photo-catalyst, has been widely applied in modern industry, thus inevitably discharged into environment. We proposed that nano-TiO₂ in soil can promote crop yield through photosynthetic and metabolic disturbance, therefore, we investigated the effects of nano-TiO₂ exposure on related physiologic-biochemical properties of rice (Oryza sativa L.). Results showed that rice biomass was increased >30% at every applied dosage (0.1–100 mg/L) of nano-TiO₂. The actual photosynthetic rate (Y(II)) significantly increased by 10.0% and 17.2% in the treatments of 10 and 100 mg/L respectively, indicating an increased energy production from photosynthesis. Besides, non-photochemical quenching (Y(NPQ)) significantly decreased by 19.8%–26.0% of the control in all treatments respectively, representing a decline in heat dissipation. Detailed metabolism fingerprinting further revealed that a fortified transformation of monosaccharides (D-fructose, D-galactose, and D-talose) to disaccharides (D-cellobiose, and D-lactose) was accompanied with a weakened citric acid cycle, confirming the decrease of energy consumption in metabolism. All these results elucidated that nano-TiO₂ promoted rice growth through the upregulation of energy storage in photosynthesis and the downregulation of energy consumption in metabolism. This study provides a mechanistic understanding of the stress-response hormesis of rice after exposure to nano-TiO₂, and provides worthy information on the potential application and risk of nanomaterials in agricultural production.     

Determination of Steroid Estrogens in Wastewater Treatment Plant of A Controceptives Producing Factory

Steroid estrogens such as estrone (E1), 17β-estradiol (E2), estriol (E3), and 17α-ethynylestradiol (EE2) have been suspected to be the main contaminants, which can affect the endocrine system of animals. Many authors have investigated these chemicals in the domestic wastewater treatment plants (WTP). However, wastewater from industries producing steroid contraceptives has not got ample attention. From the environmental point of view, the four steroids are very significant because even very low concentrations (ng/L) can cause reproductive disturbances in human, livestock and wildlife. The main purpose of the present investigation was to develop an analytical method for the determination of the four steroid estrogens present in WTP of a pharmacy factory, mainly producing contraceptive medicine in Beijing, China. Analysis was performed by solid-phase extraction (SPE) system and liquid chromatography combined with tandem mass spectrometry (LC/MS/MS). The average recoveries from effluent samples ranged from 88% to 103% and the precision of the method ranged from 9% to 4%. Based on 0.5-L wastewater samples, the limit of quantification (LOQ) was determined at 0.7 ng/L for E1, 0.8 for E2, 0.9 ng/L for E3, and 0.5 ng/L for EE2 in influent, and 1.0 ng/L for E2 and EE2, and 2.0 ng/L for E1 and E3 in effluent. In the influent samples, average concentrations of 80, 85, 73 and 155 ng/L were determined for E1, E2, E3 and EE2, respectively, showing that they were removed in this WTP to the extent of 79, 73, 85 and 67%, respectively.     

白铜和黄铜在SO2气氛中的腐蚀对比

通过SO2气体腐蚀试验、腐蚀表面的形貌观察和产物分析,对白铜和黄铜进行了对比研究。结果表明:两种铜的质量损失与SO2体积分数均成线性关系,在SO2污染环境中白铜的抗蚀能力优于黄铜;黄铜腐蚀产物主要为CuSO4.5H2O、Cu4(SO4)(OH)6.2H2O和Cu2O,白铜腐蚀产物主要为Cu4(SO4)(OH)6.2H2O和Cu2O。     

乌鲁木齐市大气中二氧化硫的灰色预测

根据灰色系统理论,联系乌鲁木齐市大气环境的实际状况,建立了精度检验为一级的灰色预测模型,经模型检验其精度完全满足要求。对乌鲁木齐大气中的SO2值进行预测分析的结果表明,乌鲁木齐市大气中SO2值呈上升的趋势,在未来几年中,乌鲁木齐市大气中SO2的预测值超过国家三级标准值(即大气中SO2的质量浓度年均值≤0.10mg/m3),这种发展趋势应引起有关部门的关注。     

污染物零排放的化石燃料燃烧系统

介绍了熔融盐循环热载体无烟燃烧技术(nonflame combustion technology usingthermal cyclic carrier of molten salt,简称NFCT).利用沉淀法制备了Fe2O3粉末,并通过机械法加工成氧载体.XRD分析表明所制备的Fe2O3粉末为单一的α-Fe2O3相在固定床反应器中表征了氧载体得失晶格氧的过程,随循环次数的增多,氧载体被CH4还原的速率会有所增加,氧载体在CH4和空气气氛中得失晶格氧是可逆过程,反应后,氧载体内部形成了蜂窝状结构.氧载体的转化度最大为82%,占氧载体总质量18%的晶格氧可以用来氧化CH4.在熔融盐反应器中用CH4作为燃料和所制备的氧载体进行了燃料燃烧和氧载体复原的实验研究在燃料燃烧反应的开始阶段,CH4大部分被氧化成了CO2,CO2的体积分数最高可以达到85%,随着反应时间的增加,氧载体的氧化能力下降,不完全氧化产物CO和未反应的CH4的体积分数逐渐升高,3000s时,CO2的体积分数只有50%在氧载体恢复晶格氧的过程中,在1500s以前,空气中的O2都被氧载体所吸收,1500s以后,该过程排出气体中的O2体积分数开始上升,至2000s气体成分与空气的成分相同.在实验中没有检测出NOx的生成.     

光电催化降解壬基酚影响因素研究

采用sol-gel法制备TiO2薄膜光电极,以该电极为工作电极,铂丝作对电极,饱和甘汞电极为参比电极,对壬基酚的光电催化降解进行了研究。结果表明:该电极具有n型半导体的特征行为。在外加偏压为+0.8V、pH=5、、30mg/L的H2O2中对初始浓度为20mg/L的壬基酚溶液光照180min降解率达62.22%。讨论了氧的存在、外加偏压、pH等因素对光电催化反应的影响。