INTEGRATED RIVER BASIN OPTIMIZATION: MODELING ECONOMIC AND HYDROLOGIC INTERDEPENDENCE1

ABSTRACT: This paper presents an integrated optimal control model that optimizes economic performance of reservoir management in watersheds in which there are significant economic and hydrologic interdependencies. The model is solved using the General Algebraic Modeling System (GAMS). Results show that application of this model to New Mexico's Rio Chama basin can increase total system benefits over historical benefits by exploiting complementarities between hydroelectricity production, instream recreation, and downstream lake recreation.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.     

臭氧在"臭氧-生物活性炭"饮用水处理工艺中的作用研究

本文通过分析饮用水深度处理中试工艺各处理单元出水水质指标的变化研究臭氧在臭氧生物活性炭工艺中的作用。试验结果表明：在中试工艺中，臭氧具有很好的氧化、杀藻和消毒的作用；并且两级臭氧氧化分别对常规处理单元和颗粒活性炭去除污染物具有一定的促进作用。     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

The New Jersey Toxics Reduction Workplan for Ny-Nj Harbor: Distribution of Pcdd/Fs in Ambient Waters

As part of the NJ Toxics Reduction Workplan for NY-NJ Harbor, ambient water samples were collected at fifteen locations along the tidal portions of the Hackensack, Passaic, Raritan, Rahway and Elizabeth Rivers, and in Newark Bay, the Arthur Kill, and Kill van Kull. A Trace Organics Platform Sampler was used to collect a total of 75 suspended sediment phase samples between June 2000 and May 2002. These samples were analyzed for spatial and wet vs. dry weather trends in the 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs; modified USEPA Method 1613b). Mean total PCDD/F (tPCDD/F) concentrations at the sampling locations ranged between 3.8 and 41.5 ng/g. On average, OCDD accounted for almost 80% of the tPCDD/F concentrations; mean total [PCDD/F – OCDD] concentrations ranged between 0.84 and 5.20 ng/g at the sampling locations. Mean 2,3,7,8-TCDD concentrations ranged between 0.003 and 0.28 ng/g, with the highest concentrations (> 0.10 ng/g) along the tidal Passaic and lower Hackensack Rivers, and in upper Newark Bay. Mean tPCDD/F Toxic Equivalency Quotients (TEQ) ranged between 45 and 344 TEQ pg/g, with the highest levels found in the lower Passaic River. Toxicity was primarily driven by 2,3,7,8-TCDD concentrations in the Passaic and Hackensack Rivers, and in Newark Bay. Examples of congener distribution patterns at some of the sampling locations are also presented.     

新型生物转筒处理食品生产废水的试验研究

生物转盘（筒）是处理中、小流量废水的一种较经济有效的方法，本试验采用新型填料式生物转筒作为关键设备处理食品加工废水，结果表明：系统对COD、BOD5、SS和LAS有显著的去除效果，当进水COD为1200～1700mg/L，BOD5为600～1200mg/L时，出水水质可以达到广东省地方标准《水污染物排放限值》（DB44／26-2001）中的二级标准。     

炼油污水深度处理回用工艺实验研究

试验工艺流程的方案选定,充分吸收了各炼油厂进行的污水深度处理的成功试验经验,以原臭氧生物活性炭工艺单元为基础,提出了以混凝气浮与臭氧生物活性炭串联工艺为核心的总体工艺流程,以降低工程投资及处理成本,提高污水回用的经济效益;同时,指出试验过程中所存在的问题及其对策。因此,开展炼油污水深度处理回用工艺试验研究,必将为炼油污水深度处理提供强有力的技术支撑,可作为相关污水回用处理工艺选择的参考。     

人机显示/控制界面适配性综合评价指标和评价方法

通过对驾驶舱人机显示 /控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究 ,建立了一套视觉信息流工效综合评估系统研究体系 ;研究的初步结果主要有 ,飞机驾驶员视域中存在最佳、较好、极限工效区 ,并且振动、反射眩光、噪声、显示字符的形状 /颜色特征 /对比度 /显示方式等是影响信息获取工效的主要因素 ;飞机驾驶舱显示布局及显示方式应符合视觉工效学设计原则。     

高速公路路基设计参数对车辆运行品质的影响

车辆—路基耦合而产生振动 ,为了更好地分析两者之间的相互作用 ,笔者提出了车辆—路基竖向耦合振动模型 ;并利用该耦合振动模型及二维有限元方法 ,探讨了高速公路不同路基设计参数对车辆运行品质的影响规律。研究结果表明 :路基刚度的变化对车辆竖向振动加速度的影响较大 ;路面平整度与车辆竖向振动加速度几乎成线性关系 ;随行车速度的增加车辆的舒适度将降低。