火焰原子吸收光谱法测定电镀废水中高浓度的锡

采用盐酸消解样品,用火焰原子吸收光谱法测定电镀废水中高浓度的锡的质量浓度,方法简单可靠。通过实验样品的分析,验证了方法的准确度和精密度。该方法干扰少,数据准确,适合废水分析。     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

我国空气自动监测系统的现状与发展趋势

结合四川省环境空气自动监测系统的运行,从运行管理模式方面探讨了我国空气自动监测系统的发展现状,以及通过国内外环境空气评价指标的比较,探讨了现阶段中国环境空气质量评价体系的不足以及增加空气污染指数分指标的必要性.     

亚运时段广州大气污染物来源数值模拟研究

利用嵌套网格空气质量预报模式系统(Nested Air Quality Prediction Model System,NAQPMS)研究2006年亚运时段广州的空气质量状况,同时结合污染源追踪方法,分析珠三角各城市的源排放对广州全市、广州二环以内市区、广州6个亚运加强观测站的污染物浓度贡献.结果表明,NAQPMS模式能较好地反映广州各污染物(NO2、SO2、PM10)浓度的变化;广州全市、广州市区、6个亚运加强观测站的污染物最主要来源于本地排放,而周边城市以东莞的贡献最大.3个源受体中,广州市区受本地排放的影响最显著,来自本地的NO2、SO2、PM10的月均贡献率分别为89.5%、75.4%、86.7%;东莞则对6个亚运加强观测站的影响最为突出,其NO2、SO2、PM10的月均贡献率达9.3%、23.8%、21.7%,而日最大贡献率高达19.3%、40.2%、48.7%.因此在大力削减广州本地污染排放的同时,对周边城市特别是东莞实施区域联防联控,将能有效改善亚运场馆附近的空气质量.     

Heavy metals and their source identification in particulate matter (PM2.5) in Isfahan City, Iran

The presence of heavy metals(HMs) in particulate matters(PMs) particularly fine particles such as PM_(2.5) poses potential risk to the health of human being. The purpose of this study was to analyze the contents of HMs in PM_(2.5) in the atmospheric monitoring stations in Isfahan city,Iran, in different seasons between March 2014 and March 2015 and their source identification using principle component analysis(PCA). The samples of PM_(2.5) were taken using a high volume sampler in 7 monitoring stations located throughout the city and industrial zones since March 2014 to March 2015. The HMs content of the samples was measured using ICP-MS.The results showed that the concentrations of As, Cd and Ni were in a range of 23–36, 1–12,and 5–76 ng/m~3 at all the stations which exceeded the US-EPA standards. Furthermore,the concentrations of Cr and Cu reached to 153 and 167 ng/m~3 in some stations which were also higher than the standard levels. Depending on the potential sources of HMs, their concentration in PM_(2.5) through the various seasons was different. PCA illustrated that the different potential sources of HMs in the atmosphere, showing that the most important sources of HMs originated from fossil fuel combustion, abrasion of vehicle tires, industrial activities(e.g., iron and steel industries) and dust storms. Management and control of air pollution of industrial plants and vehicles are suggested for decreasing the risk of the HMs in the region.     

沈阳市室内空气污染现状与控制对策

论述了由室内装修引起的室内空气污染问题,并通过对沈阳市部分居室和办公场所的监测数据进行统计分析;在有限指标内反映沈阳市室内空气污染的现状,并提出控制对策。     

城市环境总体规划中大气环境红线内涵及划定技术

城市环境总体规划是一项重大环境管理制度创新,目前全国已启动了24个城市的环境总体规划编制工作,其中划定环境红线是城市环境总体规划的核心内容。本文结合福州、宜昌、平潭等城市环境总体规划编制实践,首次提出了大气环境红线的技术框架,将大气环境红线划分为源头布局敏感区、污染易聚集区及敏感的环境受体三类,并创新性建立了大气环境红线划定技术方法,初步构建了适用于城市环境总体规划的空间规划技术体系。     

沈阳市“十一五”期间的空气污染防治

根据沈阳市环境空气面临的问题,确定“十一五”期间空气环境质量保护目标、指标,提出改善空气环境质量的对策措施,保证沈阳市大气环境质量的持续改善。     

车内空气挥发性有机物污染水平调查

随着汽车量的增长,车内空气污染造成的纠纷越来越多。在此,通过对106辆汽车内部空气的分析测试表明,车内空气污染严重。其主要成分是甲醛、苯、甲苯、二甲苯、乙苯、苯乙烯等可挥发性有机物,其中甲苯和二甲苯为首要污染物。     

气浮溶气新技术应用研究

介绍对炼油厂净化水车间一级浮选2^#池的改造，并与未改造的1^#池进行工业应用对比试验。试验结果表明，改造后大大提高了气浮处理效果，平均除油率达85％，且除油效果稳定，出水合格率比对比池提高20．4％。