Assessment of present and future risk to Italian forests and human health: Modelling and mapping

A review of ozone pollution in Italy shows levels largely above the thresholds established by EU regulation for vegetation and human health protection. The Italian air quality monitoring network appears quantitatively inadequate to cover all the territorial surface, because of scarcity and unequal distribution of monitoring sites. By applying the integrated assessment model RAINS-Italy to the year 2000, the whole of Italy exceeds the AOT40 critical level for forest, while Northern and central areas show strong potential of O₃ impact on human health with ∼11% of territory >10 O₃-induced premature deaths. Two scenarios for the year 2020, the Current Legislation and the Maximum Technical Feasible Reduction, show a reduction of AOT40Forest by 29% and 44%, SOMO35 by 31% and 47%, and O₃-induced premature deaths by 32% and 48%, compared to 2000. RAINS-Italy can be used to improve the map quality and cover areas not reached by the national monitoring network.     

Neural network forecasting of air pollutants hourly concentrations using optimised temporal averages of meteorological variables and pollutant concentrations

The new method for the forecasting hourly concentrations of air pollutants is presented in the paper. The method was developed for a site in urban residential area in city of Zagreb, Croatia, for four air pollutants (NO₂, O₃, CO and PM₁₀). Meteorological variables and concentrations of the respective pollutant were taken as predictors. A novel approach, based on families of univariate regression models, was employed in selecting the averaging intervals for input variables. For each variable and each averaging period between 1 and 97 h, a separate model was built. By inspecting values of the coefficient of correlation between measured and modelled concentrations, optimal averaging periods for each variable were selected. A new dataset for building the forecasting model was then calculated as temporal moving averages (running means) of former variables. A multi-layer perceptron type of neural networks is used as the forecasting model. Index of agreement, calculated for the entire dataset including the data for model building, ranged from 0.91 to 0.97 for the respective pollutants. As suggested by the analysis of the relative importance of the input variables, different agreements for different pollutants are likely due to different sources and production mechanisms of investigated pollutants. A comparison of the new method with more traditional method, which takes hourly averages of the forecast hour as input variables, showed similar or better performance. The model was developed for the purpose of public-health-oriented air quality forecasting, aiming to use a numerical weather forecast model for the prediction of the part of input data yet unknown at the forecasting time. It is to expect that longer term averages used as inputs in the proposed method will contribute to smaller input errors and the greater accuracy of the model.     

Oxidative properties of ambient PM2.5 and elemental composition: Heterogeneous associations in 19 European cities

We assessed the extent to which constituents of PM_2.5 (transition metals, sodium, chloride) contribute to the ability to generate hydroxyl radicals (OH) in vitro in PM_2.5 sampled at 20 locations in 19 European centres participating in the European Community Respiratory Health Survey. PM_2.5 samples (n = 716) were collected on filters over one year and the oxidative activity of particle suspensions obtained from these filters was then assessed by measuring their ability to generate OH in the presence of hydrogen peroxide. Associations between OH formation and the studied PM constituents were heterogeneous. The total explained variance ranged from 85% in Norwich to only 6% in Albacete. Among the 20 centres, 15 showed positive correlations between one or more of the measured transition metals (copper, iron, manganese, lead, vanadium and titanium) and OH formation. In 9 of 20 centres OH formation was negatively associated with chloride, and in 3 centres with sodium. Across 19 European cities, elements which explained the largest variations in OH formation were chloride, iron and sodium.     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

Which compounds contribute most to elevated airborne exposure and corresponding health risks in the Western Balkans?

A majority of ongoing monitoring of persistent organic pollutants (POPs) is currently focused on chemicals emphasized in the Stockholm Convention. Quantitative detection of other substances (especially those with numerous anthropogenic sources such as polyaromatic hydrocarbons (PAHs)) is, however, also needed since their concentrations are usually several orders of magnitude higher. A goal of this study was to determine how various groups of compounds contribute to total human health risks at the variety of sampling sites in the region of Western Balkan. Distribution of the risks between the gas and particulate phases was also addressed. Results showed that inhalation exposure to organochlorine pesticides (OCPs) does not represent a significant risk to humans, while polychlorinated biphenyls (PCBs) re-volatilized to the atmosphere from contaminated soils and buildings can pose a problem. PCB evaporation from primary sources (currently used PCB-filled transformers or non-adequate storage facilities) generally resulted in much higher atmospheric concentrations than evaporation from the secondary sources (soils at the sites of war destructions). A majority of the human health risks at the urban sites were associated with PAHs. Between 83 and 94% of the cumulative risk at such sites was assigned to chemicals sorbed to particles, and out of it, PAHs were responsible for 99%.     

Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects

The construction process contributes to pollutant emissions, particularly through the operation of diesel- and gasoline-powered equipment. In the past decade, a series of investigations were undertaken to quantify these emissions for a variety of non-road construction equipment performing different activities and undergoing different duty cycles, and a model to estimate quantities of six types of pollutant was developed. This paper uses that model to estimate emissions for four street and utility construction projects which no one has done previously. We combined information from company records with standard construction industry manuals to estimate total emissions for the projects and to examine the pollution patterns and magnitudes. The street construction projects all had similar emission profiles with a large peak at the beginning and a steady output of emissions throughout the duration of the project. For example, in two of the projects studied, half of all CO₂ emissions were produced before the projects were 40% completed. Results showed that demolition and earthwork are the activities with the largest contribution. The equipment types with the largest contribution are backhoes, front-end loaders, bulldozers and trenchers. Trenchers, for example, produced 30% of all emissions on the projects on which they were used.     

Environmental pollutants and type 2 diabetes: a review of human studies

The incidence of diabetes has increased dramatically in recent decades and become one of the leading health problems worldwide. Lifestyle and dietary changes alone cannot account for the dramatic rise of diabetes, while an increasing number of publications have reported the possible relationships between exposure to environmental pollutants and risk of diabetes. In the present review, our objective was to summarize the human studies on environmental pollutants, which includes persistent organic pollutants, pesticides (not on the Stockholm Convention list), bisphenol A, and phthalates, and the risk of diabetes. Currently published results suggest a positive relationship between certain persistent organic pollutants (dichlorodiphenyldichloroethene, dichlorodiphenyltrichloroethane, hexachlorobenzene, and polychlorinated biphenyls) and bisphenol A exposure and risk of diabetes. For pyrethroids, organophosphates, carbamates, and phthalates, there are insufficient studies to reach conclusions and therefore more studies, especially prospective studies, are needed along with in vivo and in vitro studies to understand the underlying mechanisms.     

环境污染物导致氧化应激的关键信号通路及其检测方法

环境污染物能够以多种途径进入生物体内,在体内产生含氧自由基等活性氧物质,并通过多种信号通路及酶反应引起氧化应激,造成生物体内的脂质过氧化、蛋白质损伤、DNA表达改变、酶失活等,从而引发心血管疾病、风湿类疾病、感染及癌症等的发生。本文对环境污染物致氧化应激产生的原因、涉及的信号通路及酶反应、造成的危害,以及常见的基于细胞模型的氧化应激检测方法进行了综述,期望为评价环境污染物和检测氧化损伤提供参考。