Modelling radioactivity in the Irish Sea: From discharge to dose

In order to support authorised discharges of low level radioactive liquid effluent into coastal regions, mathematical models are required to robustly predict radiological impacts on critical groups of current and proposed changes to liquid discharges. The grid model presented here simulates the long term dispersion and transport of radioactivity discharged from the Sellafield site in Cumbria, UK, and the subsequent exposure of critical groups in Cumbria and across the Irish Sea in Northern Ireland. The fine grid of the model allows a good resolution of the seabed sediment distribution. This benefits the predictions for the last decades of low discharge level, when bed sediment can become a source of contamination by bringing back the legacy of past high discharges. This is highlighted by the dose comparison, where the predicted dose to Cumbria critical group follows well the dose estimated from environmental data during the low discharge level period.     

Effect of sorbed and desorbed Zn(Ⅱ) on the growth of a green alga (Chlorella pyrenoidosa)

Toxic effect of Zn(Ⅱ) on a green alga (Chlorella pyrenoidasa) in the presence of sepiolite and kaolinite was investigated.The Zn-free clays were found to have a negative impact on the growth of C.pyrenoidosa in comparison with control samples (without adding any clay or Zn(Ⅱ)).When Zn(Ⅱ) was added,the algae in the presence of clays could be better survived than the control samples,which was actually caused by a decrease in Zn(Ⅱ) concentration in the solution owing to the adsorption of Zn(Ⅱ) on the clays.When the solution system was diluted,the growth of algae could be further inhibited as compared to that in a system which had the same initial Zn(Ⅱ) concentration as in the diluted system.This in fact resulted from desorption of Zn(Ⅱ) from the zinc-contaminated clays,although the effect varied according to the different desorption capabilities of sepiolite and kaolinite.Therefore the adsorption and desorption processes of Zn(Ⅱ) played an important part in its toxicity,and adsorption and desorption of pollutants on soils/sediments should be well considered in natural eco-environmental systems before their risk of toxicity to aquatic organisms was assessed objectively.     

染料废水物理化学脱色技术的现状与进展

本文按吸附,混凝,化学氧化,离子交换,超滤膜等几个方面分别论述了染料废水物理化学脱化技术的现状与发展情况。     

Anaerobic degradation of xenobiotic organic contaminants (XOCs): The role of electron flow and potential enhancing strategies

In groundwater, deep soil layer, sediment, the widespread of xenobiotic organic contaminants (XOCs) have been leading to the concern of human health and eco-environment safety, which calls for a better understanding on the fate and remediation of XOCs in anoxic matrices. In the absence of oxygen, bacteria utilize various oxidized substances, e.g. nitrate, sulphate, metallic (hydr)oxides, humic substance, as terminal electron acceptors (TEAs) to fuel anaerobic XOCs degradation. Although there have been increasing anaerobic biodegradation studies focusing on species identification, degrading pathways, community dynamics, systematic reviews on the underlying mechanism of anaerobic contaminants removal from the perspective of electron flow are limited. In this review, we provide the insight on anaerobic biodegradation from electrons aspect — electron production, transport, and consumption. The mechanism of the coupling between TEAs reduction and pollutants degradation is deconstructed in the level of community, pure culture, and cellular biochemistry. Hereby, relevant strategies to promote anaerobic biodegradation are proposed for guiding to an efficient XOCs bioremediation.     

Emotions drive attention: Effects on driver’s behaviour

Music is the favourite activity while driving. However, very few studies have investigated its impact on driving performances. This study was designed to assess the effect of music’s emotional valence on driving behaviour. Happy, sad and neutral music excerpts were alternated with no-music phases while driving in a simulator. Results showed that happy music distracted drivers the most as their mean speed unexpectedly decreased and their lateral control deteriorated. Sad music influenced drivers in a different way as they drove slowly and kept their vehicle in its lane. These findings were discussed within the framework of attentional orienting and emotions.     

Comparison of Three Pebble Count Protocols (EMAP,PIBO, and SFT) in Two Mountain Gravel‐Bed Streams1

Abstract: Although the term ``pebble count'' is in widespread use, there is no standardized methodology used for the field application of this procedure. Each pebble count analysis is the product of several methodological choices, any of which are capable of influencing the final result. Because there are virtually countless variations on pebble count protocols, the question of how their results differ when applied to the same study reach is becoming increasingly important. This study compared three pebble count protocols: the reach‐averaged Environmental Monitoring and Assessment Program (EMAP) protocol named after the EMAP developed by the Environmental Protection Agency, the habitat‐unit specific U.S. Forest Service’s PACFISH/INFISH Biological Opinion (PIBO) Effectiveness Monitoring Program protocol, and a data‐intensive method developed by the authors named Sampling Frame and Template (SFT). When applied to the same study reaches, particle‐size distributions varied among the three pebble count protocols because of differences in sample locations within a stream reach and along a transect, in particle selection, and particle‐size determination. The EMAP protocol yielded considerably finer, and the PIBO protocol considerably coarser distributions than the SFT protocol in the pool‐riffle study streams, suggesting that the data cannot be used interchangeably. Approximately half of the difference was due to sampling at different areas within the study reach (i.e., wetted width, riffles, and bankfull width) and at different locations within a transect. The other half was attributed to using different methods for particle selection from the bed, particle‐size determination, and the use of wide, nonstandard size classes. Most of the differences in sampling outcomes could be eliminated by using simple field tools, by collecting a larger sample size, and by systematically sampling the entire bankfull channel and all geomorphic units within the reach.     

Bankfull Regional Curves for North and Northwest Florida Streams1

Abstract: Regional curves, which relate bankfull channel dimensions and discharge to watershed drainage area, are developed to aid in identifying the bankfull stage in ungaged watersheds, and estimating the bankfull discharge and dimensions for river studies and natural channel design applications. This study assessed 26 stable stream reaches in two hydro‐physiographic regions of the Florida Coastal Plain: the Northwest Florida Coastal Plain (NWFCP) and the North Florida Coastal Plain (NFCP). Data from stream reaches in Georgia and Alabama were also used to develop the Florida regional curves, since they are located in the same hydro‐physiographic region. Reaches were selected based on the presence of U.S. Geological Survey gage stations and indicators of limited watershed development (e.g., <10% impervious surface). Analyses were conducted to determine bankfull channel dimensions, bankfull discharge, average channel slope, and Rosgen stream classification. Based on these data, significant relationships were found between bankfull cross‐sectional area, width, mean depth, and discharge as a function of drainage area for both regions. Data from this study suggested that bankfull discharges and channel dimensions were larger from NWFCP streams than from Coastal Plain streams in North Carolina and Maryland. Bankfull discharges were similar between NFCP and Georgia coastal plain streams; therefore, the data were combined into one regional curve. In addition, the data were stratified by Rosgen stream type. This stratification strengthened the relationships of bankfull width and mean depth as a function of drainage area.     

Decolourization and removal of some organic compounds from olive mill wastewater by advanced oxidation processes and lime treatment

Background Olive mill wastewater (OMW) generated by the olive oil extracting industry is a major pollutant, because of its high organic load and phytotoxic and antibacterial phenolic compounds which resist biological degradation. Mediterranean countries are mostly affected by this serious environmental problem since they are responsible for 95% of the worldwide oliveoil production. There are many methods used for OMW treatment, such as adsorption, electro coagulation, electro-oxidation, biological degradation, advanced oxidation processes (AOPs), chemical coagulation, flocculation, filtration, lagoons of evaporation and burning systems, etc. Currently, there is no such economical and easy solution. The aim of this study was to evaluate the feasibility of decolourization and removal of phenol, lignin, TOC and TIC in OMW by UV/H₂O₂ (AOPs). The operating parameters, such as hydrogen peroxide dosage, times, pH, effect of UV and natural sunlight were determined to find the suitable operating conditions for the best removal. Moreover, there is no study reported in the literature related to the use of UV/H₂O₂ and lime together in OMW treatment. Methods OMW was obtained from an olive-oil producing plant (Muğla area of Turkey) which uses a modern production process. No chemical additives are used during olive oil production. This study was realised by using two different UV sources, while taking the time and energy consumption into consideration. These two sources were mercury lamps and natural sunlight. Before starting AOPs experiments, one litre of OMW was treated by adding lime until a pH of 7.00. Then, 100 ml was taken from each sample, and 1 to 10 ml of a 30% H₂O₂ (Riedel-deHaen) solution was added. These solutions in closed vessels were laid in the natural sunlight for a week and their compositions and colour changes were analysed daily by UV-Vis spectrophotometer. At the end of the one-week period, they were treated with lime. In this study, the effect of changes in the initial pH, times and H₂O₂ concentrations on removal was investigated. At the end of all experiments, changes in colour, phenol, lignin, TOC and TIC concentrations were analysed according to standard methods. Results and Discussion In the samples exposed to natural sunlight and having an H₂O₂/OMW ratio of 3 ml/100 ml, a significant colour removal was achieved approximately 90% of the time at the end of 7 days. When the same samples were treated with lime (pH: up to 7), 99% efficiency was achieved. When phenol and lignin removals were examined in the same concentration, phenol and lignin removal were found 99.5%, 35%, respectively. However, for maximum lignin removal, more use of H₂O₂ (10 ml H₂O₂/100 ml OMW) was found to be necessary. Under these conditions, it was found that lignin can be removed by 70%, but to 90% with lime, at the end of a seven-day period. Rate constants obtained in the experiments performed with direct UV were found to be much higher than those of the samples exposed to natural sunlight (k^a _lignin = 0.3883 ≫ k^b _lignin = 0.0078; k^a _phenol = 0.5187 ≫ k^b _phenol = 0.0146). Moreover, it should be remembered in this process that energy consumption may induce extra financial burden for organisations. Conclusions It was found, in general, that colour, lignin, total organic carbon and phenol were removed more efficiently from OMW by using H₂O₂ UV and lime OMW. Moreover, in the study, lime was found to contribute, both initially and after radical reactions, to the efficiency to a great extent. Recommendations and Perspectives Another result obtained from the study is that pre-purification carried out with hydrogen peroxide and lime may constitute an important step for further purification processes such as adsorption, membrane processes, etc.     

Hydrogeochemistry and Groundwater Quality Assessment of Lower Part of the Ponnaiyar River Basin, Cuddalore District, South India

The Lower Ponnaiyar River Basin forms an important groundwater province in South India constituted by Tertiary formations dominated by sandstones and overlain by alluvium. The region enjoyed artesian conditions 50 years back but at present frequent failure of monsoon and over exploitation is threatening the aquifer. Further, extensive agricultural and industrial activities and urbanization has resulted in the increase in demand and contamination of the aquifer. To identify the sources and quality of groundwater, water samples from 47 bore wells were collected in an area of 154 km² and were analysed for major ions and trace metals. The results reveal that the groundwater in many places is contaminated by higher concentrations of NO₃, Cl, PO₄ and Fe. Four major hydrochemical facies Ca–Mg–Cl, Na–Cl, Ca–HCO₃ and Na–HCO₃ were identified using Piper trilinear diagram. Salinity, sodium adsorption ratio, and sodium percentage indicate that most of the groundwater samples are not suitable for irrigation as well as for domestic purposes and far from drinking water standards. The most serious pollution threat to groundwater is from nitrate ions, which are associated with sewage and fertilizers application. The present state of the quality of the lower part of Ponnaiyar River Basin is of great concern and the higher concentration of toxic metals (Fe and Ni) may entail various health hazards.     

Model-based analysis of the influence of ecological processes on forest point pattern formation—A case study

Many different spatio-temporal individual-based models (IBM) for forests have been developed for studying the development of trees in space and time. Such models typically depend on various numerical parameters that represent the ecological processes of growth (G), inter-plant competition (C) and birth-and-death (B&D; also called regeneration and mortality). Until now little work has been done to systematically trace the influence of these processes and their model parameters on the spatial structure of forest ecosystems.This paper attempts to fill this gap by addressing an important aspect of forest structure, spatial variability, characterised by the mark variogram as a summary characteristic. The model used was inspired by components of various well-established IBMs including a shot-noise competition field. Time series data from monospecies forests in three different countries of the northern hemisphere provided ecological reference scenarios. Though a case study, the paper's methodology is rather general and can be applied to any model and forest ecosystem.Methods of sensitivity analysis revealed that only a small number of model parameters is crucial for forming spatial variability. Particularly important is the range of competition between trees; with increasing range the variability increases. Growth processes have considerable importance particularly with short observation periods and in young forests, whereas mortality processes become more influential in the long-term. Naturally, these statements depend upon the initial structure and on the length of the observation period.