Heavy metal distribution and speciation in the Northern Adriatic Sea

In the present study the concentrations of cobalt, copper, iron, manganese, zinc were analysed and the speciation of copper and zinc performed, with a summer and winter sampling, for two areas in the Northern Adriatic Sea and crossing at the farthest zones of the Po river-sea water interface. Results show that when salinity increases the concentrations of all investigated metals (with the exception of cobalt) present some degree of biogeochemical cycling. Copper is the element whose dissolved phase has the highest importance in metal transport across the salinity gradient. Results of speciation analysis demonstrate that the presence of excess amounts (5-8 fold) of unbound ligands confers a buffering capacity for potential inputs of dissolved metals into the Northern Adriatic Sea. The speciation of both copper and zinc in the dissolved phase was dominated by organic complexation.     

Particulate organic matter in the Northern and Central Adriatic

The particulate organic matter distribution and its elemental composition in the northern and central Adriatic Sea during different seasonal periods are shown, highlighting the principal processes and factors influencing their distribution and characteristics. In the low salinity waters the concentrations of particulate carbon, nitrogen and phosphorus were higher and more variable than in the dense waters, mainly due to dilution effects which induce an abundant phytoplankton growth. Generally in summer the particulate organic matter distribution followed the trophic gradient while in winter resuspension events often became more important. Differences between summer and winter were more evident in the diluted waters and were mainly due to the seasonal heat exchanges and to the fresh water inputs. Marked differences in C/P ratios were observed in the POM: high ratios in the northern diluted waters and low in the more saline waters and in the central Adriatic.     

Water quality in the Red Sea coastal waters (Egypt): Analysis of spatial and temporal variability

In order to provide a background picture of the water quality of the Egyptian Red Sea a number of hydrological and chemical parameters have been measured bimonthly in 2000. Few data are available on this area, which is apparently subjected to an increasing human impact due to recreational (swimming and diving), industrial (mainly phosphate shipping and industry) and fishing/harbor activities. The results of the present study indicate that changes in the salinity and pH were not significant with highly oxygenated seawaters. The levels of suspended solids (as total suspended matter, TSM) and chlorophyll-a (Chl-a) were generally low and showed an homogeneous distribution in the study region. The ratio of chlorophyll-a to total suspended matter concentrations increased between November and March and decreased from May to September. Chlorophyll-a was significantly correlated with transparency and total suspended matter concentrations in July, September and November. Nitrogen, phosphorus and reactive silicate concentrations were generally low, and allowed classifying the Egyptian Red Sea coastal water as oligotrophic to mesotrophic. The middle region of the study area, which was located between Safaga and Qusair displayed relatively high phosphate contents when compared with other coastal areas. The high values of N:P ratios indicate that PO 4 -P is the limiting factor for phytoplankton growth in the Red Sea coastal waters, with the possible exception of the middle region. Significant relationships were found between chlorophyll-a concentrations and nutrient levels in different sampling periods. Spatial distribution patterns of the studied variables revealed that productivity of the Red Sea coastal waters is mostly controlled by phosphate concentrations, salinity, temperature and dissolved oxygen.     

Interannual fluctuations in acoustic biomass estimates and in landings of small pelagic fish populations in relation to hydrology in the Strait of Sicily

The main results of research work carried out since 1998 with regard to the application of hydro-acoustic technologies for the evaluation of biomass and distribution of small pelagic fish species off the southern coast of Sicily are presented, taking into account information from hydrology and from ecology of the fish populations targeted. The biomass estimates and the population‐density charts presented concern the two main species, i.e. sardine Sardina pilchardus (Walbaum, 1792) and anchovy Engraulis encrasicolus (Linnaeus, 1758). Both the sardine and anchovy populations experienced large inter-annual fluctuations, with biomass estimates ranging from 6000 to over 36,000 tonnes (t) (sardine) and from about 7000 to 23,000 t (anchovy). Acoustic estimates are largely consistent with landings recorded in Sciacca (the main fishing port for small pelagic species in the study area) during the year following the evaluation surveys. In addition, trends in sardine and anchovy biomass estimates appears to be negatively correlated with the mean sea surface temperature calculated over the time intervals January–September (sardine) and June–November (anchovy) of the preceding year, which correspond to larval and juvenile growth periods of target species. Observed patterns would suggest the importance of enrichment processes relevant to the survival of early stages, so determining recruitment success and finally higher population sizes.     

Geochemical forms of trace metals in mangrove sediments—Red Sea (Egypt)

Seven sediment samples from mangrove sediments of the Red Sea were taken in order to evaluate the possible contamination of the sediments by trace metals (iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), lead (Pb) and cadmium (Cd)). Sequential extraction techniques were performed to study the different geochemical forms of these metals. X-ray diffraction analysis has been performed to correlate the mineralogical composition with the geochemical forms of the studied elements. The results of Fe and Mn contents indicate that they are in large part from lithogenous origin. The elevated concentrations are associated with the residual form ranged from 70 to 93% for Fe and 46 to 70% for Mn. The percentage of Zn, Cu, Cd and Pb in the non-residual form was much greater than that of the residual fractions. This reflects the high mobility and bioavailability of these metals in mangrove sediments of the Red Sea. X-ray diffraction analysis revealed the presence of silicate components including quartz, feldspars and clay minerals in some locality. Non-silicate components recorded in the study area as calcite as well as, Mg-calcite. Quantitatively both components i.e. silicate and carbonate varied according to their source material.     

Spatial distribution of copper in relation to recreational boating in a California shallow-water basin

The overall effect of the number of boats on the copper (Cu) levels in the water column and sediment, along with their spatial variability within Shelter Island Yacht Basin (SIYB), San Diego Bay, California was examined. We identified a horizontal gradient of increasing dissolved Cu and Cu in sediment from outside to the head of SIYB which was coincident with the increasing number of boats. Spatial models of Cu distribution in water and sediment indicated the presence of ‘hotspots’ of Cu concentration. From outside to the head of SIYB, dissolved Cu ranged from 1.3 μ g L^?1 to 14.6 μ g L^?1 in surface water, and 2.0 μ g L^?1 to 10.2 μ g L^?1 in bottom water. Cu in sediment exceeded the Effect Range Low of 34 mg kg^?1 (i.e. where adverse effects to fauna may occur), with a peak concentration of 442 mg kg^?1 at the head of the basin. Free Cu⁺⁺ in surface water was several orders of magnitude higher than in sediment porewater. High-resolution data of Cu species together with probability maps presented in this paper will allow managers to easily visualise and localise areas of impaired quality and to prioritise which areas should be targeted to improve Cu-related conditions.     

The Monitoring of UK Sewage Sludge Disposal Sites

In recent years there has been an increase in the intensity and frequency of environmental monitoring surveys at UK sewage sludge disposal sites. These have been carried out by the regulatory authorities and by the licensees. in order to ensure maximum efficiency, a coordinated and harmonised programme of monitoring has been developed. the programme concentrates on sediment chemical and biological quality but also includes assessments of water and fish quality

In England and Wales the Ministry of Agriculture, Fisheries and Food is the regulatory authority and the Water Authorities are the licensees. the Ministry's first priority is the collection of samples for temporal trend analysis but in addition, infrequent surveys are made to check the status of the disposal site and surrounding areas. in the periods between status surveys, regular spatial surveys designed to define the area of impact are carried out by the Water Authorities.     

Response of benthic foraminifera to heavy metal contamination in marine sediments (Sicilian coasts,Mediterranean Sea)

To examine the suitability of benthic foraminifera and their test deformations as bioindicators of pollution in coastal marine environments, we studied foraminifera and metal concentrations in 72 marine sediment samples, collected from the inner shelf along the Sicilian coast (Gulfs of Palermo and Termini) and on the south-eastern coast of Lampedusa Island. These areas are characterised by different environmental conditions. On the basis of pollution sources and foraminiferal assemblages, we recognised different zones in the Gulf of Palermo. The most polluted zones showed high metal concentrations, and low diversity of benthic foraminifera with species typical of stressed environments. By contrast, the lowest polluted zones showed a high population density and the highest percentages of epiphytes. Epiphytes were abundant where a Posidonia oceanica meadow was present and decreased in the most polluted zones. Sediments of the Gulf of Termini and Lampedusa exhibited high percentages of benthic foraminifera typical of well-oxygenated waters and low concentrations of metals, with the exception of sites located near sewage outfalls and harbour areas. Furthermore, even though deformed tests are commonly known in natural stressed environmental conditions, this study shows that in the most polluted zones, benthic foraminifera were characterised by the highest percentages of deformed individuals.     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

Contamination of lead (Pb) in the coastal sediments of north and south of Iran: a review study

Coastal areas of Iran are heavily affected by urbanisation, industrialisation, and maritime activities. One consequence of this environmental pressure is the contaminants accumulation, as heavy metals, into the marine ecosystem. In this review, the coastal areas in the north and south of the country were assessed for lead (Pb) contamination of, one of the most toxic metals found in the environment. All studies conducted during 2006–2016 with at least 10 specimens that reported the mean and standard deviation of Pb were considered in this review. Heterogeneity between studies was assessed using the Q and I² statistics. The Pb mean concentration overall studies was estimated to be 21.88?µg/g (95% CIs: 16.25–27.50). Random effect model showed no statistical difference in mean Pb concentration levels between south and north coasts. However, the variability in Pb mean concentrations within southern coasts was considerable and statistically significant. Moreover, the Pb concentrations in the northern coasts of Persian Gulf and Oman Sea, in south of Iran, decreased in the following order Hormozgan > Khuzestan > Sistan-VA-Balluchestan > Bushehr while in the southern coasts of Caspian Sea, in north of Iran, decreased in the order Guilan > Mazandaran > Golestan.