牛仔布印染污泥组成特征及资源化途径分析

采用浸出-焙烧-化学分析和显微镜观察等手段查明了牛仔布印染污泥主要由纤维碎和浮石矿物组成。分析了牛仔布印染污泥的浸出物特性及模拟渗滤液的组成。渗滤液含Zn、Pb、Cr等重金属,AS、P和NH3-N超过地表水环境质量Ⅳ类水标准,简易填埋会对环境造成二次污染。分析提出了该类污泥的资源化途径,可用作吸附剂、水泥、轻质陶粒和岩棉的原料。     

Effects of water regime,crop residues,and application rates on control of Fusarium oxysporum f. sp. cubense

Biological soil disinfestation is an effective method to control soil-borne disease by flooding and incorporating with organic amendments, but field conditions and resources sometimes limited its practical application. A laboratory experiment was conducted to develop practice guidelines on controlling Fusarium wilt, a widespread banana disease caused by Fusarium oxysporum f. sp. cubense (FOC). FOC infested soil incorporated with rice or maize straw at rates of 1.5 tons/ha and 3.0 tons/ha was incubated under flooded or water-saturated (100% water holding capacity) conditions at 30°C for 30 days. Results showed that FOC populations in the soils incorporated with either rice or maize straw rapidly reduced more than 90% in the first 15 days and then fluctuated till the end of incubation, while flooding alone without organic amendment reduced FOC populations slightly. The rapid and dramatic decrease of redox potential (down to − 350 mV) in straw-amended treatments implied that both anaerobic condition and strongly reductive soil condition would contribute to pathogen inactivation. Water-saturation combined with straw amendments had the comparable effects on reduction of FOC, indicating that flooding was not indispensable for inactivating FOC. There was no significant difference in the reduction of FOC observed in the straw amendments at between 1.5 and 3 tons/ha. Therefore, incorporating soil with straw (rice or maize straw) at a rate of 3.0 tons/ha under 100% water holding capacity or 1.5 tons/ha under flooding, would effectively alleviate banana Fusarium wilt caused by FOC after 15-day treating under 30°C.     

Biological removal of antiandrogenic activity in gray wastewater and coking wastewater by membrane reactor process

A recombinant human androgen receptor yeast assay was applied to investigate the occurrence of antiandrogens as well as the mechanism for their removal during gray wastewater and coking wastewater treatment. The membrane reactor (MBR) system for gray wastewater treatment could remove 88.0% of antiandrogenic activity exerted by weakly polar extracts and 97.3% of that by moderately strong polar extracts, but only 32.5% of that contributed by strong polar extracts. Biodegradation by microorganisms in the MBR contributed to 95.9% of the total removal. After the treatment, the concentration of antiandrogenic activity in the effluent was still 1.05 μg flutamide equivalence (FEQ)/L, 36.2% of which was due to strong polar extracts. In the anaerobic reactor, anoxic reactor, and membrane reactor system for coking wastewater treatment, the antiandrogenic activity of raw coking wastewater was 78.6 mg FEQ/L, and the effluent of the treatment system had only 0.34 mg FEQ/L. The antiandrogenic activity mainly existed in the medium strong polar and strong polar extracts. Biodegradation by microorganisms contributed to at least 89.2% of the total antiandrogenic activity removal in the system. Biodegradation was the main removal mechanism of antiandrogenic activity in both the wastewater treatment systems.     

Effects of gas flow rate, inlet concentration and temperature on the biofiltration of toluene vapors

In this work the variation in the elimination capacity of a biofilter as a function of the gas flow and toluene concentration was studied. A bioreactor 0.75 m high x 14.5 cm diameter was used, divided into three equal stages, using compost to support the microorganisms, and sea shells to control the pH. The biofiltration of toluene was evaluated for flows between 0.12 and 0.73 m(3)h(-1) in a concentration range of 1-3.2 gm(-3). It was observed that on increasing the toluene inlet load by 90% (from 37 to 70 gm(3)h(-1)), the conversion by the biofilter varied by only 5% (from 98% to 93%). The biofiltration system used achieved elimination capacities of up to 82 gm(-3)h(-1) for a toluene load of 100 gm(-3)h(-1).     

Alien plant invasions--incorporating emerging invaders in regional prioritization: a pragmatic approach for Southern Africa

Plant invasions are a serious threat to natural and semi-natural ecosystems worldwide. Most management-orientated research on invasions focuses on invaders that are already widespread and often have major impacts. This paper deals with "emerging" invaders-those alien species with the potential to become important problems without timely intervention. A climate matching procedure was developed to define areas of South Africa, Lesotho and Swaziland that could be invaded by 28 plant species that had previously been classified as emerging invaders. Information on the location of populations of these species in the study area was combined with information on their distributions (as native or alien) in parts of Australia and the United States of America. These two countries had the best available distribution data for this study. They also share many invasive alien plant species with South Africa. Climatic data obtained for weather stations near points of known occurrence in these countries were used to define the climatically suitable areas for each species in the study area. Almost 80% of the remaining natural environment in southern Africa was found to be vulnerable to invasion by at least one of these species, 50% by six or more and 24% by 16 or more species. The most vulnerable areas are the highveld grasslands and the eastern escarpment. The emerging invaders with the greatest potential range included Acacia podalyriifolia and Cortaderia selloana. The globally important invaders Ulex europaeus and Lythrum salicaria had a more limited invasion potential but could still become major invaders. There was no relationship between the extent of the climatically suitable areas for the different species and an expert ranking of their invasion potential, emphasising the uncertainties inherent in making expert assessments based on very little information. The methods used in this analysis establish a protocol for future modelling exercises to assess the invasion potential of other emerging invaders.     

Water Hyacinth in China: A Sustainability Science-Based Management Framework

The invasion of water hyacinth (Eichhornia crassipes) has resulted in enormous ecological and economic consequences worldwide. Although the spread of this weed in Africa, Australia, and North America has been well documented, its invasion in China is yet to be fully documented. Here we report that since its introduction about seven decades ago, water hyacinth has infested many water bodies across almost half of China’s territory, causing a decline of native biodiversity, alteration of ecosystem services, deterioration of aquatic environments, and spread of diseases affecting human health. Water hyacinth infestations have also led to enormous economic losses in China by impeding water flows, paralyzing navigation, and damaging irrigation and hydroelectricity facilities. To effectively control the rampage of water hyacinth in China, we propose a sustainability science-based management framework that explicitly incorporates principles from landscape ecology and Integrated Pest Management. This framework emphasizes multiple-scale long-term monitoring and research, integration among different control techniques, combination of control with utilization, and landscape-level adaptive management. Sustainability science represents a new, transdisciplinary paradigm that integrates scientific research, technological innovation, and socioeconomic development of particular regions. Our proposed management framework is aimed to broaden the currently dominant biological control-centered view in China and to illustrate how sustainability science can be used to guide the research and management of water hyacinth.     

A novel approach to estimate and control denitrification performance in activated sludge systems with respirogram technology

Respirogram technology has been widely applied for aerobic process, however, the response of respirogram to anoxic denitrification is still unclear. To reveal such response may help to design a new method for the evaluation of the performance of denitrification. The size distribution of flocs measured at different denitrification moments demonstrated a clear expansion of flocs triggered by denitrification, during which higher specific endogenous and quasi-endogenous respiration rates (SOUR_e and SOUR_q) were also observed. Furthermore, SOUR_q increases exponentially with the specific denitrification rate (SDNR), suggesting that there should be a maximum SDNR in conventional activated sludge systems. Based on these findings, an index R_q/t, defined as the ratio of quasi-endogenous (OUR_q) to maximum respiration rate (OUR_t), is proposed to estimate the denitrification capacity that higher R_q/t indicates higher denitrification potential, which can be readily obtained without complex measurement or analysis, and it offers a novel and promising respirogram-based approach for denitrification estimation and control by taking measures to extend anoxic time to maintain its value at a high level within a certain range.     

The long and winding road to resource efficiency – An interdisciplinary perspective on extended producer responsibility

Extended producer responsibility is advocated for its capacity to spur resource efficiency through green innovation and closing loops downstream of consumption. Its rationale is the extension of the polluter-pays principle to the post-consumption phase. This paper analyze the underlying mechanisms that are supposed to work under the EPR approach, and proposes an alternative view. The main purpose of EPR is seen as the creation of the bases for legitimizing the involvement if industry taking over the task of diverting waste from landfill. Its success rests on the superior managerial capacity of industry and the need to organize post-consumption markets that transcend the local scale and have access to the economies of scale and scope. The emphasis on producers does not add anything special, but may reinforce the bases for legitimizing the implicit delegation of power to industry. Primary and above all, we have witnessed in the last 20 years a gigantic effort of market design, and this is the main demonstration of EPR's success.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

Mechanical recycling of EOL concrete into high-grade aggregates

Recycling End of Life (EOL) concrete into high-grade aggregate for new concrete is a challenging prospect for the building sector because of the competing constraints of low recycling process cost and high aggregate product quality. A further complicating factor is that, from the perspective of the environment, there is a strong societal drive to reduce bulk transport of building materials in urban environments, and to apply more in situ recycling technologies for Construction & Demolition Waste. The European C2CA project investigates a combination of smart demolition, grinding of the crushed concrete in an autogenous mill to increase the liberation of cement mortar from the surface of aggregates and a novel dry classification technology called ADR to remove the fines. The feasibility of this recycling process was examined in a demonstration project involving 20,000 tons of EOL concrete from two office towers in Groningen, the Netherlands. Results show that the +4 mm recycled aggregate compares favorably with natural aggregate in terms of workability and the compressive strength of the new concrete, showing 30% higher strength after 7 days.