Phytotoxicity of thiourea application on soybean seedlings北大核心CSCD

For a precise evaluation of environmental and eco-toxicology effect of nitrification inhibitor on agroecosystem, the phytotoxicity of nitrification inhibitor should be fully understand. This paper aimed to study the phytotoxicity of thiourea and urea application on soybean seedlings. Effects of thiourea on the biomass, content of metal ions and chlorophyll level were studied in the leaves of soybean, and the effects of thiourea on anti-oxidative system (SOD, POD, and CAT) and content of MDA in the leaves of soybean were also investigated. The results showed that thiourea had great impact on the growth of soybean. Low concentration (1.0 mmol kg-1) of thiourea could slightly inhibit the growth of seedlings, and increase the activities of SOD, POD, CAT. Thiourea treatment of different concentrations had no effect on the content of Cu and Zn ion in soybean seedlings, but could obviously change the content of Mn and Fe ions in soybean seedlings. The content of Mn ion increased with the concentration of thiourea, from 18.58 mg kg-1 in the control to 45.45 mg kg-1 with 5 mmol kg-1 thiourea treatment. On the other hand, the content of Fe ion decreased with the concentration of thiourea, from 20.77 mg kg-1 in the control to 17.63 with 5 mmol kg-1 thiourea treatment. Heave inhibition effects and phytotoxic symptom were found in thriourea treatment of 5.0 mmol kg-1. The growth of seedlings was obviously inhibited; the content of chlorophyll in leaves of soybean decreased to 2.11 mg kg-1 compared to 3.56 mg kg-1 in that of the control. Simultaneously, the activities of SOD, POD, CAT and the content of MDA increased dramatically when thiourea reached 5.0 mmol kg-1. The heave inhibition effects and phytotoxic symptom in the soybean seedling indicated that thiourea could induce environmental stress in the seedlings.     

Modulation of predator-prey interactions by the Allee effect

An Allee effect arising from density-dependent mating success can have significant impacts at the ecosystem level when considered in the context of predator-prey interactions. These are captured by a mathematical model for the exchange of biomass between a structured predator population (continuous weight distribution) and a resource. Because the predator’s mating success affects the amount of resources required for the production of offsprings and their future growth into mature organisms, it influences the flux of biomass between trophic levels. Under simple assumptions, the equations can be reduced to an equivalent unstructured predator-prey model in which the Allee effect modulates the predation rate: the mating probability multiplies the rate of predator growth as well as the rate of resource depletion. Implications of the Allee effect for the bifurcation structure and equilibrium densities are examined. The model is compared to a modified version in which the Allee effect instead modulates the assimilation efficiency, hence the mating probability does not appear in the dynamical equation for the resource density. Both models exhibit qualitatively similar dynamics. However, compared to the model in which the Allee effect modulates predation, the model in which the Allee effect modulates assimilation efficiency predicts (i) unrealistically inefficient resource assimilation when predator density is low, (ii) a higher risk of catastrophic extinction resulting from a change in the parameter controlling the strength of the Allee effect, and (iii) no possibility of an increase in population size when the density dependence is enhanced.     

Foliage profiles of individual trees determine competition,self-thinning,biomass and NPP of a Cryptomeria japonica forest stand: A simulation study based on a stand-scale process-based forest model

A simulation study was carried out to investigate simultaneously the effects of eco-physiological parameters on competitive asymmetry, self-thinning, stand biomass and NPP in a temperate forest using an atmosphere–vegetation dynamics interactive model (MINoSGI). In this study, we selected three eco-physiological relevant parameters as foliage profiles (i.e. vertical distribution of leaf area density) of individual trees (distribution pattern is described by the parameter η), biomass allocation pattern in individual tree growth (χ) and the maximum carboxylation velocity (V_max). The position of the maximal leaf area density shifts upward in the canopy with increasing η. For scenarios with η < 4 (foliage concentrated in the lowest canopy layer) or η > 12 (foliage concentrated in the uppermost canopy layer), a low degree of competitive asymmetry was produced. These scenarios resulted in the survival of subordinate trees due to a brighter lower canopy environment when η < 4 or the generation of spatially separated foliage profiles between dominant and subordinate trees when η > 12. In contrast, competition between trees was most asymmetric when 4 ≤ η ≤ 12 (vertically widespread foliage profile in the canopy), especially when η = 8. In such cases, vertically widespread foliage of dominant trees lowered the opportunity of light acquisition for subordinate trees and reduced their carbon gain. The resulting reduction in carbon gain of subordinate trees yielded a higher degree of competitive asymmetry and ultimately higher mortality of subordinate trees. It was also shown that 4 ≤ η ≤ 12 generated higher self-thinning speed, smaller accumulated NPP, litter-fall and potential stand biomass as compared with the scenarios with η < 4 or η > 12. In contrast, our simulation revealed small effects of χ or V_max on the above-mentioned variables as compared with those of η. In particular, it is notable that greater V_max would not produce greater potential stand biomass and accumulated NPP although it has been thought that physiological parameters relevant to photosynthesis such as V_max influence dynamic changes in forest stand biomass and NPP (e.g. the greater the V_max, the greater the NPP). Overall, it is suggested that foliage profiles rather than biomass allocation or maximum carboxylation velocity greatly govern forest dynamics, stand biomass, NPP and litter-fall.     

Translocation and biotoxicity of metal (oxide) nanoparticles in the wetland-plant system

• Aquatic plants are more likely to absorb TiO₂ NPs that are beneficial to them. • Ag NPs inhibited the growth of aquatic plants under both 5- and 60-day exposure. • CeO₂ NPs had positive/negative impact on plant in 5/60-day exposure, respectively. • TiO₂ NPs presence could enhance the photosynthesis and increase the plant biomass. • The ENPs changed plant activity, which resulted in changes of wetland performance. Engineered nanoparticles (ENPs) threaten the environment through wastewater discharging. Generally, constructed wetlands (CWs) are efficient methods for ENPs removal. However, the biotoxicity of ENPs on plants in CWs is unclear. Here, we investigated the distribution and bio-impacts of different ENPs (Ag NPs, TiO₂ NPs, and CeO₂ NPs) in plants under 5- and 60-day exposure to 1 and 50 mg/L concentrations. Results showed that ENPs appeared in the vascular bundle and mesophyll cell space, which induced the variation in antioxidase activities (e.g., superoxide dismutase [SOD], peroxidase [POD], and catalase [CAT] activities) as well as overproduction of malondialdehyde (MDA). Additionally, Ag NPs inhibited photosynthesis rate and root activity during two exposure phases. CeO₂ NPs had positive and negative impacts on plants in 5- and 60-day exposure, respectively. Inversely, TiO₂ NPs enhanced photosynthesis and root activity under 60-day exposure. Finally, the contents of the C, N, and P elements in plants fluctuated in response to ENPs stress. All results have a positive correlation with the wetland performance under ENPs exposure except for TiO₂ NPs treatment. Overall, our study systematically reveals aquatic plants' responses to ENPs and provides a reference for building ecological treatment systems to purify wastewater containing ENPs.     

Total recycling of CCA treated wood waste by low-temperature pyrolysis

A system to turn a potentially harmful stream of solid waste into a set of substreams with either commercial value or highly concentrated residual streams is presented. The waste which is considered is metal impregnated (in particular Chromated Copper Arsenate (CCA) treated) wood waste and timber, such as telephone poles, railway sleepers, timber from landscape and cooling towers, wooden silos, hop-poles, cable drums and wooden playground equipment. These waste streams sum up to several 100,000 tons of material per year currently to be dumped in every major country of the European Community (EC). Technologies need to be developed to reduce this CCA treated wood waste, such that all of the metals are contained in a marketable product stream, and the pyrolysis gases and/or pyrolysis liquid are used to their maximum potential with respect to energy recuperation. Pyrolysing the CCA treated wood waste may be a good solution to the growing disposal problem since low temperatures and no oxidising agents are used, which result in lower loss of metals compared to combustion. An experimental labscale pyrolysis system has been developed to study the influence of the pyrolysis temperature and the duration of the pyrolysis process on the release of metals and the mass reduction. The macrodistribution and microdistribution of the metals in the solid pyrolysis residue is studied using Inductively Coupled Plasma Mass Spectrometry (ICP–MS) and Scanning Electron Microscopy coupled with Energy Dispersive X-ray Analysis (SEM–EDXA). Furthermore, a complete mass balance is calculated over the pyrolysis system. Based on these results a semi-industrial pyrolysis system (pilot plant scale) has been developed consisting of three stages: grinding, packed bed pyrolysis and metal separation. Special types of equipment have been developed to carry out the three stages. A new grinding system has been developed, based on a crushing mechanism rather than a cutting mechanism. The crushed wood is introduced by means of a screw feeding system into a reaction column. In this pyrolysis reactor the wood is heated by subjecting it to a flow of hot gases. This causes an adiabatic pyrolysis, which results in volatilisation of the volatile compounds whereas the mineral compounds (containing the metals) remain entrapped in a coal-type residue which is very rich in carbon. The condensable compounds in the pyrolysis gas condense while leaving the reaction zone due to the inverse temperature gradient. The pyrolysis gas leaving the reactor is used as fuel for the hot gas generator. The charcoal which is extracted at the bottom of the reactor, is cooled, compressed, removed and stored, ready to feed the subsequent stage. A specially developed grinder is used to remove the metal particles from the charcoal and the separation between metal and charcoal particles is accomplished in a pneumatic centrifuge as a result of the difference in density. Using this system the ultimate waste is less than 3% of the initial wood mass. Results obtained with a semi-industrial scale prototype confirm the effectiveness of the process.     

Biogenic cements and encapsulation of zinc

Metals can be stabilized into cement matrix by solidification/stabilization process. Rice hull is an agricultural residue containing about 10-20% (weight) of silica. It can be used to synthesize β-Ca₂SiO₄, an important component of Portland cement. Furthermore it is possible to prepare β-Ca₂SiO₄ doped with heavy metals. Here we describe the synthesis of β-Ca₂SiO₄ doped with zinc and the behavior of mortars prepared using this material. Products were analyzed by X-ray diffraction, differential thermal analysis and scanning electron microscopy coupled to energy-dispersive spectroscopy. The maximum amount of zinc that can be inserted into β-Ca₂SiO₄, without affecting the crystalline structure, is limited to 2% (molar basis). In comparison with conventional mortars, zinc-modified mortars show a similar behavior, regarding porosity, resistance to acidic attack and compressive strength. The synthesis of β-Ca₂SiO₄ doped with zinc presents a new possibility for safety enhancement in solidification/stabilization processes.     

Effects of soiling and cleaning on the reflectance and solar heat gain of a light-colored roofing membrane

A roof with high solar reflectance and high thermal emittance (e.g., a white roof) stays cool in the sun, reducing cooling power demand in a conditioned building and increasing summertime comfort in an unconditioned building. The high initial solar reflectance of a white membrane roof (circa 0.8) can be lowered by deposition of soot, dust, and/or biomass (e.g., fungi or algae) to about 0.6; degraded solar reflectances range from 0.3 to 0.8, depending on exposure. We investigate the effects of soiling and cleaning on the solar spectral reflectances and solar absorptances of 15 initially white or light-gray polyvinyl chloride membrane samples taken from roofs across the United States. Black carbon and organic carbon were the two identifiable strongly absorbing contaminants on the membranes. Wiping was effective at removing black carbon, and less so at removing organic carbon. Rinsing and/or washing removed nearly all of the remaining soil layer, with the exception of (a) thin layers of organic carbon and (b) isolated dark spots of biomass. Bleach was required to clear these last two features. At the most soiled location on each membrane, the ratio of solar reflectance to unsoiled solar reflectance (a measure of cleanliness) ranged from 0.41 to 0.89 for the soiled samples; 0.53 to 0.95 for the wiped samples; 0.74 to 0.98 for the rinsed samples; 0.79 to 1.00 for the washed samples; and 0.94 to 1.02 for the bleached samples. However, the influences of membrane soiling and cleaning on roof heat gain are better gauged by fractional variations in solar absorptance. Solar absorptance ratios (indicating solar heat gain relative to that of an unsoiled membrane) ranged from 1.4 to 3.5 for the soiled samples; 1.1 to 3.1 for the wiped samples; 1.0 to 2.0 for the rinsed samples; 1.0 to 1.9 for the washed samples; and 0.9 to 1.3 for the bleached samples.     

青山水库底栖动物群落初步研究

1996年10月－1997年7月对青山水库底栖大型无脊椎动物群落进行了4次采样调查,共发现大型底栖无脊椎动物16种,其中寡毛类5种,水生昆虫7种,软件动物2种,蛭类和线虫各1种。青山水库底栖动物群落密度和生物量的水平变化为库出口＞库中心＞进口。湖区底栖动物群落占优势的各类为：刺夹长足摇蚊（Tanypus punctipennis）、花翅前突摇蚊（Procladius choreus)和霍甫水丝蚓（Limnodrilus hoffmeisteri)。调查结果表明,目前青山水库底栖动物群落的种类组成指示该水体已属富营养型,但从生物量上分析,目前青山水库应属中营养。     

Large variability in ambient ozone sensitivity across 19 ethylenediurea-treated Chinese cultivars of soybean is driven by total ascorbate

The sensitivity of Chinese soybean cultivars to ambient ozone(O3) in the field is unknown,although soybean is a major staple food in China. Using ethylenediurea(EDU) as an O3 protectant, we tested the gas exchange, pigments, antioxidants and biomass of 19 cultivars exposed to 28 ppm·hr AOT40(accumulated O3 over an hourly concentration threshold of40 ppb) over the growing season at a field site in China. By comparing the average biomass with and without EDU, we estimated the cultivar-specific sensitivity to O3 and ranked the cultivars from very tolerant( 10% change) to highly sensitive( 45% change), which helps in choosing the best-suited cultivars for local cultivation. Higher lipid peroxidation and activity of the ascorbate peroxidase enzyme were major responses to O3 damage, which eventually translated into lower biomass production. The constitutional level of total ascorbate in the leaves was the most important parameter explaining O3 sensitivity among these cultivars. Surprisingly, the role of stomatal conductance was insignificant. These results will guide future breeding efforts towards more O3-tolerant cultivars in China, while strategies for implementing control measures of regional O3 pollution are being implemented. Overall, these results suggest that present ambient O3 pollution is a serious concern for soybean in China, which highlights the urgent need for policy-making actions to protect this critical staple food.     

2014年春季上海典型生物质燃烧污染过程分析

针对2014年5月末华东地区出现的大范围秸秆焚烧污染事件(BB),利用上海浦东超级站多种在线监测数据,并结合卫星遥感、数值模拟等方法,对污染期间前(BB-前)、中(BB-中)、后(BB-后)的时空演化进程进行了分析。结果表明,期间平均ρ(PM2.5)和ρ(BC)分别由BB-前的24.3和1.24μg/m3攀升至BB-中的111.90和5.38μg/m3,小时峰值出现在5月27日,达到238.0和15.1μg/m3,BB-后虽有显著好转,但"翘尾"现象明显,ρ(PM2.5)和ρ(BC)为34.6和1.49μg/m3;在空气污染扩散不利条件下,生物质燃烧污染会加重其他多种污染物的污染水平;农田秸秆燃烧烟羽的传输受气象条件所限,使得上海外围火点的多寡与城市污染的水平无必然联系。