混合填充体系对铬渣中六价铬的阻留作用

以铬渣和粉煤灰为混合填充体系的主要填料，采用柱子淋洗法，通过改变混合填料的配比来研究其对铬渣中Cr(Ⅵ)的阻留作用。试验结果表明，各种混合填充体系对Cr(Ⅵ)均有一定程度的阻留作用，其中I—5校对Cr(Ⅵ)的阻留固定效果最佳，淋出液中Cr(Ⅵ)的质量分数为0．删％，相对阻留效果达94．53％。     

Drying of granulated wood ash by flue gas from saw dust and natural gas combustion

At the district heating plant of Kalmar, Sweden an on-line unit for production of granulated wood ash for nutrient recycling on forest soils is being applied. Currently, the granules are dried by hot air from an oil-fired burner. The objective of this work was to investigate how drying by flue gas affects the hardening of granules, or impacts their chemical composition and properties. Ninety-six granule samples were treated by flue gas from natural gas combustion in a laboratory pilot scale flue gas generator. CO₂, CO, O₂, C₃H₈ and NO concentrations were varied during the experiment. Additionally, some samples were treated by flue gas from combustion of sawdust at the heating plant in Kalmar. Drying by flue gases did not affect the chemical composition of granules, but minor effects were seen in their mineralogy. The carbonate content was slightly higher in granules treated with flue gas from natural gas combustion compared to the granules dried by hot air only, when measured by wet chemical methods. Results from XRD analysis imply that the calcite content is higher and the portlandite and arcanite content slightly less in granules treated with flue gas from sawdust combustion compared to the granules dried by hot air only. The results from this investigation showed no negative effects on ash granule composition or physical structure by the use of a flue as a drying medium.     

以造粒粉煤灰为过滤介质去除景观水中磷的研究

研究了造粒粉煤灰的最大磷吸附量、磷吸附速率等吸附特征，以及颗粒粒径、磷浓度、水力负荷对景观水除磷效果的影响。还进行了为期21天的连续过滤试验，发现滤床在高水力负荷条件下能持续地去除景观水中的磷。     

循环流化床锅炉脱硫的影响因素分析

较为系统的分析了影响循环流化床锅炉脱硫的各因素,其中包括运行床温、Ca与S物质的量、床料粒度、流化速度、以及SO_2在炉膛停留时间等,提出在不同运行条件下利用拟合曲线找出最佳脱硫工况。     

垃圾焚烧烟气中二(噁)英零排放技术实践

介绍了绍兴新民热电有限公司用煤和垃圾混烧循环流化床技术处理城市生活垃圾，焚烧烟气经活性炭吸附、半干法和布袋除尘器净化工艺处理后，烟气中二噁英接近零排放。     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

垃圾焚烧飞灰中重金属的固化/稳定化处理实验研究

研究了城市生活垃圾焚烧-电灰的特性及飞灰中重金属的特性,对利用水泥作粘结剂进行飞灰固化/稳定化处理效果开展了系统的实验研究,分析了水泥固化/稳定化飞灰的工艺特点和最佳工艺参数,并讨论了粘结剂固化飞灰机理以及重金属浸出毒性,为进一步研究城市生活垃圾焚烧飞灰的无害化处理与利用提供了有重要价值的参考依据.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

粉煤灰综合利用过程中汞的二次释放规律研究

我国粉煤灰年产生量4亿t左右,近年来利用率稳定在65%～68%,主要利用方式包括建材生产、道路施工、建筑工程和农业利用.建材生产包括高温工序,可能存在粉煤灰中汞的二次释放.本研究设计实验模拟了水泥生产、蒸养砖生产的主要环境因素,利用程序升温脱附的方法研究粉煤灰利用过程中的汞迁移转化规律,并对全国范围内粉煤灰利用过程汞的二次释放量做出估算.研究发现,粉煤灰中的汞以HgCl2(Hg2Cl2)、HgS和HgO的形式存在;水泥生产过程中,粉煤灰中98%以上的汞会释放;蒸养砖生产过程中,粉煤灰中汞的平均释放率为28%,释放率主要受到粉煤灰中的HgCl2(Hg2Cl2)比例的影响.我国粉煤灰利用过程中的汞二次排放量由2002年的4.07 t.a-1增至2008年的9.18 t.a-1,其中水泥行业的贡献率占到96.6%.