CO2 capture and storage from a bioethanol plant: Carbon and energy footprint and economic assessment

Biomass energy and carbon capture and storage (BECCS) can lead to a net removal of atmospheric CO₂. This paper investigates environmental and economic performances of CCS retrofit applied to two mid-sized refineries producing ethanol from sugar beets. Located in the Region Centre France, each refinery has two major CO₂ sources: fermentation and cogeneration units. “carbon and energy footprint” (CEF) and “discounted cash flow” (DCF) analyses show that such a project could be a good opportunity for CCS early deployment. CCS retrofit on fermentation only with natural gas fired cogeneration improves CEF of ethanol production and consumption by 60% without increasing much the non renewable energy consumption. CCS retrofit on fermentation and natural gas fired cogeneration is even more appealing by decreasing of 115% CO₂ emissions, while increasing non renewable energy consumption by 40%. DCF shows that significant project rates of return can be achieved for such small sources if both a stringent carbon policy and direct subsidies corresponding to 25% of necessary investment are assumed. We also underlined that transport and storage cost dilution can be realistically achieved by clustering emissions from various plants located in the same area. On a single plant basis, increasing ethanol production can also produce strong economies of scale.     

Performance of amine-multilayered solid sorbents for CO2 removal: Effect of fabrication variables

The emission of fossil fuel carbon dioxide (CO₂) to the atmosphere is implicated as the predominant cause of global climate change; therefore, advanced CO₂ capture technologies are of the utmost importance. In this study, innovative amine-multilayered sorbents were fabricated using layer-by-layer (LbL) nanoassembly technology via alternate deposition of a CO₂-adsorbing amine polymer (e.g. polyethylenimine or PEI) and an oppositely-charged polymer (e.g. polystyrene sulfonate or PSS). We found that the developed sorbents could be used for CO₂ capture and that LbL nanoassembly allows us to engineer their CO₂ capture performance through the fabrication variables (e.g. deposition polymers, deposition media, and number of bilayers). PEI/PSS was found to be the best polymer combination for developing sorbents with relatively high CO₂ capture capacity. The amine-multilayered solid sorbents possessed fine microstructures and may have similar polymer deposition within and on the surface of solid sorbents. These amine-multilayered sorbents had much faster CO₂ desorption rates compared to sorbents prepared using the current PEI-impregnation approach. Such fast CO₂ desorption could make sorbents a good option for CO₂ removal from power plants and even the atmosphere.     

臭氧-生物活性炭技术在微污染饮用水处理中的应用

通过研究国内外臭氧—生物活性炭工艺的发展现状和应用实践，指出了该项技术在应用中体现出的优越性，并提出了此项技术在应用中存在的问题，部分地介绍了提高此项技术应用水平的措施。研究表明，臭氧—生物活性炭工艺在处理微污染饮用水将会受到重视和广泛地推广应用，同时也对今后的研究方向提出了相应的观点。     

Potential world garbage and waste carbon sequestration

To offset the carbon dioxide released by fossil fuels, a proposed sequestration strategy relies on burying garbage and waste in landfills. This paper roughly estimates the current annual world supply of carbonaceous waste to be 35.5 billion metric tons and to contain about 18 billion metric tons of carbon. If landfills received all of this waste, sequestration of more than 5.6 billion metric tons of carbon seems theoretically possible—an amount well in excess of the 3.3 billion metric tons which the atmosphere is currently gaining.     

Estimation of atmospheric trace metal emissions in Vilnius City, Lithuania, using vertical concentration gradient and road tunnel measurement data

A new approach for the estimation of trace metal emissions in Vilnius city was implemented, using vertical concentration profiles in the urban boundary layer and road tunnel measurement data. Heavy metal concentrations were examined in fine and coarse particle fractions using a virtual impactor (cut-off size diameter 2.5 μm). Negative vertical concentration gradients were obtained for all metals (Ba, Pb, V, Sb, Zn) and both fractions. It was estimated that the vertical concentration gradient was formed due to emissions from an area of about 12 km². Road tunnel measurements indicated that trace metal concentrations on fine particles were lower than those on coarse particles, which suggested that re-emitted road dust was highly enriched in trace metal due to historic emissions within the tunnel. Emission rates of different pollutants in the road tunnel were calculated using pollutant concentration differences at the tunnel entrance and exit and traffic flow data. Heavy metal emission rates from the area of Vilnius city were estimated using the vertical gradient of heavy metal concentrations and the coefficient of turbulent mixing, as derived from meteorological measurement data. The emission values calculated by the two different methods coincided reasonably well, which indicated that the main source of airborne trace metals in Vilnius city is traffic. The potential of the vertical concentration gradient method for the direct estimation of urban heavy metal emissions was demonstrated.     

A simple semi-empirical model for predicting missing carbon monoxide concentrations

Carbon monoxide monitoring using continuous samplers is carried out in most major urban centres in the world and generally forms the basis for air quality assessments. Such assessments become less reliable as the proportion of data missing due to equipment failure and periods of calibration increases. This paper presents a semi-empirical model for the prediction of atmospheric carbon monoxide concentrations near roads for the purpose of interpolating missing data without the need for any traffic or emissions information. The model produces reliable predictions while remaining computationally simple by being site-specifically optimized. The model was developed for, and evaluated at, both a suburban site and an inner city site in Hamilton, New Zealand. Model performance statistics were found to be significantly better than other simple methods of interpolation with little additional computational complexity.     

Mechanistic insight into the biofilm formation and process performance of a passive aeration ditch (PAD) for decentralized wastewater treatment

• A Passive Aeration Ditch was developed to treat decentralized wastewater. • A model was developed to describe the process performance. • A high C/N ratio facilitates microbial growth but nitrification deteriorates. • A high salinity decreases both organic and nitrogen contaminants removal. Decentralized wastewater containing elevated salinity is an emerging threat to the local environment and sanitation in remote coastal communities. Regarding the cost and treatment efficiencies, we propose a passive aeration ditch (PAD) using non-woven polyester fabric as a feasible bubbleless aerator and biofilm carrier for wastewater treatment. Consideration has been first given to PAD’s efficacy in treating saline decentralized wastewater, and then to the impact of chemical oxygen demand-to-nitrogen (C/N) ratio and salinity on biofilm formation. A multispecies model incorporating the salinity effect has been developed to depict the system performance and predict the microbial community. Results showed that the PAD system had great capacity for pollutants removal. The biofilm thickness increased at a higher C/N ratio because of the boost of aerobic heterotrophs and denitrifying bacteria, which consequently improved the COD and total nitrogen removal. However, this led to the deterioration of ammonia removal. Moreover, while a higher salinity benefited the biofilm growth, the contaminant removal efficiencies decreased because the salinity inhibited the activity of aerobic heterotrophs and reduced the abundance of nitrifying bacteria inside the biofilm. Based on the model simulation, feed water with salinity below 2% and C/N ratio in a range of 1 to 3 forms a biofilm that can reach relatively high organic matter and ammonia removal. These findings not only show the feasibility of PAD in treatment of saline decentralized wastewater, but also offer a systematic strategy to predict and optimize the process performance.     

Recent advances in antimony removal using carbon-based nanomaterials: A review

• The synthesis and physicochemical properties of various CNMs are reviewed. • Sb removal using carbon-based nano-adsorbents and membranes are summarized. • Details on adsorption behavior and mechanisms of Sb uptake by CNMs are discussed. • Challenges and future prospects for rational design of advanced CNMs are provided. Recently, special attention has been deserved to environmental risks of antimony (Sb) element that is of highly physiologic toxicity to human. Conventional coagulation and ion exchange methods for Sb removal are faced with challenges of low efficiency, high cost and secondary pollution. Adsorption based on carbon nanomaterials (CNMs; e.g., carbon nanotubes, graphene, graphene oxide, reduced graphene oxide and their derivatives) may provide effective alternative because the CNMs have high surface area, rich surface chemistry and high stability. In particular, good conductivity makes it possible to create linkage between adsorption and electrochemistry, thereby the synergistic interaction will be expected for enhanced Sb removal. This review article summarizes the state of art on Sb removal using CNMs with the form of nano-adsorbents and/or filtration membranes. In details, procedures of synthesis and functionalization of different forms of CNMs were reviewed. Next, adsorption behavior and the underlying mechanisms toward Sb removal using various CNMs were presented as resulting from a retrospective analysis of literatures. Last, we prospect the needs for mass production and regeneration of CNMs adsorbents using more affordable precursors and objective assessment of environmental impacts in future studies.     

Cracking styrene derivative polymers in decalin solvent with metal-supported carbon catalysts

The cracking of styrene derivative polymers dissolved in decalin was conducted with metal-supported carbon catalysts under an inert gas atmosphere to recover monosubstituted styrene or monosubstituted ethylbenzene in higher yields than is obtained by pyrolysis, and to elucidate the detailed reaction mechanisms in the solvent. Poly-(4-methylstyrene), poly-(4-t-butylstyrene), poly-(α-methylstyrene), and polystyrene were used. In decalin without a catalyst, each polymer was decomposed into the monomer, dimer, and trimer derived from the corresponding polymer except for poly-(α-methylstyrene), which was decomposed into the monomer and styrene. By using metal-supported carbon, the olefinic compounds derived from the corresponding polymer were thoroughly hydrogenated to the saturated form in a nitrogen atmosphere by a hydrogen transfer reaction from decalin, which was simultaneously dehydrogenated to tetralin and naphthalene with the evolution of hydrogen gas. In comparison with metal species, Pd- and Ru-supported carbon catalysts maintained the hydrogenation activity for a longer time and with a lower evolution of hydrogen than Pt or Rh. The dehydrogenation of decalin was mainly observed not on the metal surfaces, but on the carbon surfaces over Pd-supported carbon. Stabilization of the monomers will be able to suppress the coking which occurs with repolymerization in long running process. Received: July 19, 2000 / Accepted: March 16, 2001