化肥污染与防治

随着农业发展,化肥的用量越来越大,大量化肥进入环境中,必然对环境造成污染。本文着重探讨化肥对水、空气、土壤及人畜的污染及危害,提出防治化肥污染的措施。     

富营养化水体中微囊藻毒素（MCs）去除技术研究进展

当前,随着工业的发展水体富营养化程度日益严重。引起富营养化的主要藻类一蓝藻,能够释放对人体及鱼类具有多器官毒性、遗传性和致癌性的毒素——微囊藻毒素（MCs）。MCs治理技术种类繁多,传统的物理法如：混凝沉淀、膜过滤、活性炭吸附、气浮以及直接过滤只能对简单的处理细胞内的MCs;化学氧化法、光催化氧化法以及高级氧化法虽然能有效处理水体中的MCs．但有成本高、易二次污染和操作复杂等缺点,难以满足日益严格的环保要求;生物酶法除了具有生物降解法所具有的廉价、无二次污染、降解彻底和易操作等特点外,还被刺用来监控水体中MCs,它将成为今后重点研究的技术领域．     

洱海流域农田土壤氮素的矿化及其影响因素

采用好氧间歇淋洗培养法,对洱海流域内的农田、菜地土壤样品培养2周,研究土壤氮的矿化及其影响因素.结果表明,表层土壤2周氮矿化量平均为65.54mg/kg.不同农田利用方式下,表层土壤氮矿化量的平均值为露地菜田粮田大蒜田.土壤氮素矿化以硝态氮为主,且随着土壤深度的增加而降低.土壤氮矿化同全氮、有机质含量呈明显的正相关关系,与pH值呈负相关;氮矿化与无机氮含量、C/N之间无显著关系.全氮、有机质和pH值是影响该流域农田土壤矿化的主要因子.     

火电湿法烟气脱硫塔模拟及优化操作分析

基于火电石灰石-石膏湿法烟气脱硫工艺,以华能福州电厂实际生产数据为依据,经对设备分别简化建模,建立了反映实际脱硫过程的脱硫塔模型,形成全工艺模拟流程,模型计算结果和实际运行数据间平均误差为0.4364%.对脱硫工艺过程进行灵敏度分析,得出循环浆液pH值、烟气流量、液气比等因素对吸收效率的影响.最后,以灵敏度分析结论为基础,借助多目标优化方法分析不同工况下各控制因素对脱硫效率的影响,得到基本优化控制范围(pH值处于5.4～5.6、烟气压力处于0～1000Pa)和相应的最优控制方案,并分析了优化操作结果的工业适用性.     

Heavy metal （Pb,Zn） uptake and chemical changes in rhizosphere soils of four wetland plants with different radial oxygen loss

Lead and Zn uptake and chemical changes in rhizosphere soils of four emergent-rooted wetland plants; Aneilema bracteatum, Cyperus alternifolius, Ludwigia hyssopifolia and Veronica serpyllifolia were investigated by two experiments: (1) rhizobag filled with “clean” or metal-contaminated soil for analysis of Pb and Zn in plants and rhizosphere soils; and (2) applied deoxygenated solution for analyzing their rates of radial oxygen loss (ROL). The results showed that the wetland plants with di erent ROL rates had significant e ects on the mobility and chemical forms of Pb and Zn in rhizosphere under flooded conditions. These e ects were varied with di erent metal elements and metal concentrations in the soils. Lead mobility in rhizosphere of the four plants both in the “clean” and contaminated soils was decreased, while Zn mobility was increased in the rhizosphere of the “clean” soil, but decreased in the contaminated soil. Among the four plants, V. serpyllifolia, with the highest ROL, formed the highest degree of Fe plaque on the root surface, immobilized more Zn in Fe plaque, and has the highest e ects on the changes of Zn form (EXC-Zn) in rhizosphere under both “clean” and contaminated soil conditions. These results suggested that ROL of wetland plants could play an important role in Fe plaque formation and mobility and chemical changes of metals in rhizosphere soil under flood conditions.     

盘锦市湿地资源利用与恢复生态功能探讨

分析了盘锦市湿地由于不合理的开发利用,导致生态功能受损状况;为防止湿地资源的过度开发,保护湿地生态系统的结构、物种、功能效应,使湿地资源永续利用,提出了具有可操作性的恢复措施。     

油库中油品的蒸发危害及措施

分析了造成油库油品蒸发损耗的原因及危害,并针对油罐的自然通风、“小呼吸”、“大呼吸”所造成的油品损耗,提出了降低油品蒸发损耗的措施。     

典型铝合金在江津自然大气环境中的腐蚀行为研究

通过在我国江津典型工业污染大气环境进行大气暴晒实验,测定了1060纯铝、2A12铝合金和7A04铝合金在该地区的腐蚀速率,利用扫描电子显微镜（SEM）、能量色散X射线谱（EDX）、红外光谱（FT—IR）和X射线衍射仪（XRD）观察分析3种铝合金腐蚀表面形貌、元素分布和腐蚀产物结构。结果表明：随腐蚀时间的延长,铝及其合金腐蚀产物不断增多,失重数值增加,腐蚀失重与时间的关系呈幂函数规律（C—A t^n）;腐蚀产物形貌呈块状或粒状,呈现不均匀的凹凸形貌;腐蚀产物主要为Al（OH）3和Al2（SO4）3·14H2O;耐蚀性能由强至弱依次为1060〉2A12〉7A04。     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

PAN dust explosion inhibition mechanisms of NaHCO3 and Al(OH)3

We investigate the PAN dust explosion inhibition behaviors of NaHCO₃ and Al(OH)₃ in a 20 L spherical explosion system and a transparent pipe explosion propagation test system. The results show that, in the standard 20 L spherical explosion system, the highest PAN dust explosion concentration is 500 g/m³, the maximum explosion pressure is 0.661 MPa, and the maximum explosion pressure increase rate is 31.64 MPa/s; adding 50% NaHCO₃ and 60% Al(OH)₃ can totally inhibit PAN dust explosion. In the DN0.15 m transparent pipe explosion propagation test system, for 500 g/m³ PAN dust, the initial explosion flame velocity is 102 m/s, the initial pressure is 0.46 MPa, and the initial temperature is 967 °C; adding 60% NaHCO₃ and 70% Al(OH)₃ can totally inhibit PAN dust explosion flames. Through FTIR and TG analyses, we obtain the explosion products and pyrolysis patterns of the explosion products of PAN dust, NaHCO₃, and Al(OH)₃. On this basis, we also summarize the PAN dust explosion inhibition mechanisms of NaHCO₃ and Al(OH)₃.