城市垃圾焚烧飞灰中重金属的形态及酸浸出性研究

研究了城市垃圾焚烧飞灰中重金属形态在不同粒径上的分布,以及HNO3对飞灰中重金属的浸出性.结果表明:飞灰中重金属主要以残渣态存在,可交换离子态含量很少;易挥发性的重金属在较大粒径上有较高分布,亲石性重金属Cr和Ni的分布与粒径的相关性不大,在各粒径上的分布较均匀;飞灰中以碳酸盐结合态存在的重金属对酸不稳定,易被HNO3浸出,而残渣态部分对酸较稳定,不易被HNO3浸出.     

Assessing microbial and chemical exposure risks of Giardia in indoor swimming pool water disinfected by chlorine

Swimming pools adopt chlorination to ensure microbial safety. Giardia has attracted attention in swimming pool water because of its occurrence, pathogenicity, and chlorine resistance. To control Giardia concentrations in pool water and reduce the microbial risk, higher chlorine doses are required during disinfection. Unfortunately, this process produces carcinogenic disinfection byproducts that increase the risk of chemical exposure. Therefore, quantitatively evaluating the comparative microbial...     

Water-soluble matter in PM2.5 in a coastal city over China: Chemical components, optical properties, and source analysis

Although marine and terrestrial emissions simultaneously affect the formation of atmospheric fine particles in coastal areas, knowledge on the optical properties and sources of water-soluble matter in these areas is still scarce. In this work, taking Qingdao, China as a typical coastal location, the chemical composition of PM_2.5 during winter 2019 was analyzed.Excitation-emission matrix fluorescence spectroscopy was combined with parallel factor analysis model to explain the component...     

Degradation of polycyclic aromatic hydrocarbons by combined chemical pre-oxidation and bioremediation in creosote contaminated soil

The ability of pre-oxidation to overcome polycyclic aromatic hydrocarbons (PAH) recalcitrance to biodegradation was investigated in creosote contaminated soil. Sand and peat artificially spiked with creosote (quality WEI C) were used as model systems. Ozonation and Fenton-like treatment were proved to be feasible technologies for PAH degradation in soil. The efficiency of ozonation was strongly dependent on the water content of treated soil samples. The removal of PAH by Fenton-like treatment depended on the applied H2O2/soil weight ratio and ferrous ions addition. It was determined that the application of chemical oxidation in sand resulted in a higher PAH removal and required lower oxidant (ozone, hydrogen peroxide) doses. The enhancement of PAH biodegradability by different pre-treatment technologies also depended on the soil matrix. It was ascertained that combined chemical and biological treatment was more efficient in PAH elimination in creosote contaminated soil than either one alone. Thus, the combination of Fenton-like and the subsequent biological treatment resulted in the highest removal of PAH in creosote contaminated sand, and biodegradation with pre-ozonation was found to be the most effective technology for PAH elimination in peat.     

Location selection of emergency supplies repositories for emergency logistics management: A variable weighted algorithm

With the development of the city, the number of establishments that are proposed or under construction is increasing year by year, and if they are industries that handle flammable, explosive, toxic, harmful, and dangerous substances, the public safety will face great threats, which will bring great challenges to emergency rescue work. Therefore, providing reasonable solutions to the problem of location selection of emergency supplies repositories are necessary for improving the emergency response efficiency in chemical industrial parks. A mathematical model for location selection of emergency supplies repositories in emergency logistics management are presented considering more actual factors. The optimization objectives of the model are to minimize total transport length and cost. And then a Variable Weighted Algorithm is designed to solve the model, where an auxiliary function was constructed with different methods of building weighting factors based on the theory and method of solving multi-objective optimization problems in operational research. Simulation results show the effectiveness and feasibility of the models and algorithms presented in this paper.     

绿色化工环保技术与环境治理的关系

我国化工产业的不断发展,带动了我国经济的飞速发展,给人们的生活带来了许多便利条件,但是与此同时也对我国的环境造成了严重的破坏,化工生产用到许多化学材料,在生产过程中会产生大量的化学废弃物,对环境的污染造成很严重的影响。我国对化工生产给环境保护造成的影响高度重视,随着绿色化工环保技术的出现,有效解决了化工产业造成的环境污染问题,对我国的环境问题进行了有效的改善,对我国工业的发展具有重要意义。本文针对绿色化工环保技术进行分析,探讨绿色化工环保技术在环境治理中的有效应用。     

对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

Systematic review on the implementation methodologies of inherent safety in chemical process

The accomplishments of inherent safety in the field of loss prevention thus far are impressive due to its scientific philosophy: reducing risks at source rather than adding engineered and procedural protections. Generally, the implementation of inherent safety can be done through a cohesive set of fourteen principles elucidated by Kletz and Amyotte. This work, guided by the fourteen principles, presents a systematic review on the implementation methodologies of inherent safety. Firstly, PRISMA procedure was adopted to select eligible literatures according to inclusive and exclusive criteria. After obtaining the selected literatures, the preference, level of application, and gaps in using these principles were critically analyzed. Of the fourteen principles, intensification, substitution, attenuation, simplification, limitation of effects, and avoidance of knock-on effects are preferable to implementing inherent safety in chemical process. Although the remaining principles are also potentially useful, they are not commonly used due to their costs and complexities of implementation. Overall, this work presents a complete spectrum to look across the implementation methodologies of inherent safety and concludes with some holistic and inclusive approaches as future research recommendations.     

Hierarchical pre-positioning of emergency resources for a chemical industrial parks concentrated area

Accidents in chemical industrial parks always cause fateful damage which can be reduced greatly by providing emergency resources sufficiently and timely. One effective way to enhance the emergency response capacity and agility is by pre-positioning of emergency resources for the potential accidents. The Yangtze River Delta of China is a large region where a large number of chemical industrial parks are concentrated. According to the distributing characteristics of demand points in this region, a mathematical model of hierarchical pre-positioning of emergency resources is proposed to ensure that accidents in all chemical industrial parks in this region can be responded timely and effectively. Considering accident domino effect and minimizing the total cost, the model gives optimal decisions of pre-positioning emergency resources, including the location and inventory of depots. The innovative hierarchical pre-positioning method greatly reduces the total cost in the premise of sufficient preparation for supplying emergency resources. Finally, in a visual graph of the Yangtze River Delta, the model is applied and the result shows its applicability.     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.