主动脉动气流分选处理废弃催化剂

废弃催化剂重整后含有富集贵金属的海绵体和烧结磁珠,二者的有效分选是提纯贵金属富集体的重要环节。主动脉动气流分选装置能够对此物料进行干法分选,避免了湿法分选对物料的改性,有利于贵金属富集体的后续提纯。介绍了主动脉动气流分选装置的结构,分析主动脉动气流分选机理及其动力学模型。通过实际物料进行分选试验。结果表明,在脉动频率为7/3 Hz,气流流速为2.50~6.00 m/s时,总分选效率Ef高于94.50%;在气流流速为3.33 m/s时,分选效率最高,总分选效率Ef可达97.63%。     

淡水环境沉积物中微塑料的密度分离方法研究

微塑料污染已广泛覆盖了全球海洋和淡水环境的表层水体、深层水体以及沉积物,沉积物中的泥沙和其他杂质颗粒会严重影响对沉积物中微塑料的实验分析.因此,将微塑料从沉积物中分离出来至关重要,而目前我国微塑料分离方法暂无统一的系统程序和检测标准.该研究在岷江成都段选取4个采样点采集沉积物样品,通过对比研究基于密度分离法的3种分离方...     

不同操作条件对纳滤膜去除水中五价砷的研究

采用纳滤膜（NF90）过滤自配含砷水,研究在不同操作条件下纳滤膜对水中砷去除效果的影响。本实验探讨膜进水浓度、水的pH值、膜进水温度、操作压力、水中天然有机物浓度等对膜除砷效率的影响。结果表明：纳滤膜对水中五价砷（As（Ⅴ））的去除率很高,最高去除率能达到99%,在实验的前2.5个小时内,砷的去除率均在90%以上。但是,纳滤膜除砷效率随着时间变化,去除率会降低。不同的操作条件对纳滤膜除砷的影响很大,研究不同条件的影响对应用很有意义。     

水合物法的天然气提氦技术研究

氦气是发展国防军工和高科技产业不可或缺的战略性物资之一.由于氦气在自然界中的富集度很低,目前工业规模化提氦来源主要是含氦天然气.常用的提氦方法有吸附法、吸收法、低温冷凝法、膜分离法等,但它们都不能很好地解决提氦难度大、成本高、规模化工业应用水平较低等缺点.因此,引入水合分离技术,利用含氦天然气各组分生成水合物的条件差异在水合反应过程中对氦气提浓,同时辅以催化脱氢工艺,实现粗氦的精制.     

环境样品中汞形态分析技术的进展

汞的毒性、环境行为、生物有效性不仅跟其浓度有关,还决定于其化学形态,因此汞的形态分析在环境科学中具有重要意义。样品前处理几乎是汞形态分析研究中不可或缺的步骤,而色谱和光谱/质谱联用技术是目前普遍采用的分离检测方法。文章对近十年来这些方面的研究进展进行了综述,主要包括样品的前处理方法如酸/碱溶剂萃取、微波辅助萃取、固相萃取、固相微萃取、单滴微萃取、分散液液微萃取等,以及色谱(液相色谱、气相色谱)和毛细管电泳与光谱/质谱(紫外可见光谱、原子吸收光谱、原子荧光光谱、等离子体质谱等)的联用技术在汞化合物形态分析中的应用情况。最后提出今后应重点研究建立高效、简便的前处理方法,发展高分离度、高灵敏度、高速度的分离检测联用技术,以便更好地对汞的形态进行分析监测。     

SGO改性复合纳滤膜的制备及分盐性能

近年来,水资源短缺,水源污染严重,国家对水处理末端的资源化利用提出了更高的要求,分盐过程也受到越来越多的关注.纳滤膜表面通常带有电荷,可以选择性地透过不同价态的离子.基于纳滤膜表面电荷特性不同,为很好地实现盐的分离,将制备的带有磺酸基团的氧化石墨烯引入到纳滤膜材料中,采用界面聚合法,制备了SGO改性复合纳滤膜. Zeta电位分析表明所制备的复合纳滤膜表面的电荷比不添加SGO的纳滤膜更负;红外光谱分析中酯基基团特征峰的出现表明磺酸基团参与了聚合反应; SEM结构表面,膜表面出现了明显的图灵结构,在0. 2 MPa压力下,纯水通量可达45. 85 L·(m~2·h)-1,对Na2SO4截留率为98. 23%,对Na Cl截留率为24. 93%,10 h运行可以很好地实现对SO_4~(2-)、Cl~-的有效分离,可实现盐的资源化回收.     

Functional flax fiber with UV-induced switchable wettability for multipurpose oil-water separation

● A PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed. ● The property of flax fiber could be switched from hydrophobicity to hydrophilicity. ● The mechanism of the acquired UV-induced switchable wettability was discussed. ● The developed flax fiber was successfully used for multipurpose oil-water separation. The large number of oily wastewater discharges and oil spills are bringing about severe threats to environment and human health. Corresponding to this challenge, a functional PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed for efficient oil-water separation in this study. The developed flax fiber was obtained through PAA grafted polymerization and then ZnO-HDTMS nanocomposite immobilization. The as-prepared PAA-ZnO-HDTMS flax fiber was hydrophobic initially and could be switched to hydrophilic through UV irradiation. Its hydrophobicity could be easily recovered through being stored in dark environment for several days. To optimize the performance of the PAA-ZnO-HDTMS flax fiber, the effects of ZnO and HDTMS concentrations on its switchable wettability were investigated. The optimized PAA-ZnO-HDTMS flax fiber had a large water contact angle (~130°) in air and an extremely small oil contact angle (~0°) underwater initially. After UV treatment, the water contact angle was decreased to 30°, while the underwater oil contact angle was increased to more than 150°. Based on this UV-induced switchable wettability, the developed PAA-ZnO-HDTMS flax fiber was applied to remove oil from immiscible oil-water mixtures and oil-in-water emulsion with great reusability for multiple cycles. Thus, the developed flax fiber could be further fabricated into oil barrier or oil sorbent for oil-water separation, which could be an environmentally-friendly alternative in oil spill response and oily wastewater treatment.     

Recent advances in antimony removal using carbon-based nanomaterials: A review

• The synthesis and physicochemical properties of various CNMs are reviewed. • Sb removal using carbon-based nano-adsorbents and membranes are summarized. • Details on adsorption behavior and mechanisms of Sb uptake by CNMs are discussed. • Challenges and future prospects for rational design of advanced CNMs are provided. Recently, special attention has been deserved to environmental risks of antimony (Sb) element that is of highly physiologic toxicity to human. Conventional coagulation and ion exchange methods for Sb removal are faced with challenges of low efficiency, high cost and secondary pollution. Adsorption based on carbon nanomaterials (CNMs; e.g., carbon nanotubes, graphene, graphene oxide, reduced graphene oxide and their derivatives) may provide effective alternative because the CNMs have high surface area, rich surface chemistry and high stability. In particular, good conductivity makes it possible to create linkage between adsorption and electrochemistry, thereby the synergistic interaction will be expected for enhanced Sb removal. This review article summarizes the state of art on Sb removal using CNMs with the form of nano-adsorbents and/or filtration membranes. In details, procedures of synthesis and functionalization of different forms of CNMs were reviewed. Next, adsorption behavior and the underlying mechanisms toward Sb removal using various CNMs were presented as resulting from a retrospective analysis of literatures. Last, we prospect the needs for mass production and regeneration of CNMs adsorbents using more affordable precursors and objective assessment of environmental impacts in future studies.     

小型四旋翼无人机悬停状态气动干扰与安全间隔研究*

为保证小型旋翼无人机近距编队悬停状态的安全性,采用数值模拟方法研究不同横向和纵向间隔双机悬停流场特征和气动参数变化规律,通过与实验结果对比,验证数值仿真方法的准确性。研究结果表明:无人机内部旋翼间的气动干扰会导致整机单旋翼拉力降低、扭矩增大,使整机气动效率下降;当双机无横向间隔时,双机下洗流场保持对称,同时2股下洗流叠加,呈现较明显的横向扩张趋势,此时后机所受气动影响主要为拉力损失,当纵向间隔大于5 D时,该影响基本消失;当横向间隔X=1 D时,位于尾流区一侧的旋翼拉力减小,后机所受俯仰力矩作用显著,无人机有侧翻风险;横向间隔X≥2 D时,2机之间气动干扰较弱,为较安全区域。     

纸基复合包装中铝塑分离的湿法工艺条件研究

纸基复合包装中的纸基部分通过水力碎浆分离后可直接用于生产再生纸. 其铝塑部分由1层0.02～0.03 mm厚的铝箔和2层0.03～0.08 mm厚的低密度聚乙烯膜层压复合而成,主要对铝塑的湿法分离进行研究.比较了甲酸、乙酸、盐酸3种剥离剂的分离效果; 用甲酸作为铝塑剥离剂时, 考察了剥离剂的浓度、反应温度、液固比及破碎尺寸对铝塑分离的影响; 根据铝塑分离时间、分离率、铝的损失率等指标,通过正交试验及方差分析优化铝塑分离的工艺条件. 结果表明,甲酸分离铝塑的最优条件: 剥离剂浓度为4 mol/L, 反应温度为60 ℃,液固比为60 L/kg, 破碎尺寸为5 cm×5 cm. 在该条件下, 铝塑的分离率达到100%.