In situ sequential treatment of a mixed contaminant plume

Groundwater plumes often contain a mixture of contaminants that cannot easily be remediated in situ using a single technology. The purpose of this research was to evaluate an in situ treatment sequence for the control of a mixed organic plume (chlorinated ethenes and petroleum hydrocarbons) within a Funnel-and-Gate. A shallow plume located in the unconfined aquifer at Alameda Point, CA, was found to contain up to 218,000 μg/l of cis-1,2 dichloroethene (cDCE), 16,000 μg/l of vinyl chloride (VC) and <1000 μg/l of 1,1 dichloroethene (1,1 DCE), trans-1,2 dichloroethene (trans-1,2 DCE) and trichloroethene (TCE). Total benzene, toluene, ethylbenzene and xylenes (BTEX) concentrations were <10,000 μg/l. Contaminated groundwater was funneled into a gate, 3.0 m wide, 4.5 m long and 6.0 m deep (keyed into the underlying aquitard) where treatment occurred. The initial gate segment consisted of granular iron, for the reductive dechlorination of the higher chlorinated ethenes. The second segment, the biosparge zone, promoted aerobic biodegradation of petroleum hydrocarbons and any remaining lesser-chlorinated compounds, stimulated by dissolved oxygen (DO) and carbon dioxide (CO₂) additions via an in situ sparge system (CO₂ was used to neutralize the high pH produced from reactions in the iron wall). Groundwater was drawn through the gate by pumping two wells located at the sealed, downgradient, end. Over a 4-month period an estimated 1350 g of cDCE flowed into the treatment gate and the iron wall removed 1230 g, or 91% of the mass. The influent mass of VC was 572 g and the iron wall removed 535 g, corresponding to 94% mass removal. The other chlorinated ethenes had significantly lower influent masses (3 to 108 g) and the iron wall removed the majority of the mass resulting in >96% mass removal for any of the compounds. In spite of these high removal percentages, laboratory column tests indicated that at these levels of chlorinated contaminants, surface saturation of the iron grains likely contributed to lower than expected reaction rates. In the biosparge zone, mass removal of cDCE appeared to occur predominantly by biodegradation (65%) with volatilization (35%) being an important secondary process. The dominant removal process for VC was volatilization (70%) although significant biodegradation was also indicated (30%). Laboratory microcosm results confirmed the potential for aerobic biodegradation of cDCE and VC. When average influent field concentrations for cDCE and VC were 220,000 and 46,000 μg/l, respectively, the sequential treatment unit removed 99.6% of the total mass and when the influent concentrations decreased to 26,000 and 19,000 μg/l for cDCE and VC, respectively, >99.9% removal within the treatment gate was attained. BTEX compounds were found to be significantly retarded in the iron treatment zone. Although they did eventually break through the granular iron, and into the gravel transition zone, none of these compounds was detected in the biosparge zone. No noticeable interferences between the anaerobic (reductive) and aerobic parts of the system occurred during testing. The results of this experiment show that in situ treatment sequences are viable, although further work is needed to optimize performance.     

取代苯胺和苯酚类化合物对大型(Daphnia magna Straus)的定量结构-活性关系研究

研究了３６个取代苯胺和苯酚类化合物对大型溲的急性毒性，应用正辛醇／水分配系数，线性溶解能关系参数和分子连接性指数得出了该类化合物的定量构效关系方程，这些方程可以用来进行该化合物危害性初评。ＬＳＥＲ法得到的ＱＳＡＲ方程拟合效果较好，增大分子体积及偶极性－极化性，均可增大毒性，化合物与蛋白质等生物大分子的氢键键合作用是导致该类化合物毒性高于其基本毒性的原因。     

Heterogeneity of chlorinated hydrocarbon sorption properties in a sandy aquifer

Hydraulic conductivity and sorption coefficients for chlorinated hydrocarbons (chloroform, carbon tetrachloride and tetrachloroethylene) were evaluated for 216 sediment samples collected across a 15 m transect and a 21 m depth interval in a contaminated aquifer near Schoolcraft, Michigan. Relationships between hydraulic conductivity, linear sorption partition coefficients, grain size classes, and spatial location were investigated using linear regression analysis and geostatistical techniques. Clear evidence of layering was found in sorption properties, hydraulic conductivity and grain sizes. Conductivity correlated well with grain size, as expected, but sorption varied inversely with grain size, contrary to some previous reports. No significant correlation was found between sorption properties and hydraulic conductivity. This is likely due to the unexpected presence of small amounts of highly sorptive coal-like solids, which dominate the sorption behavior but have little effect on conductivity. The results demonstrate that recent findings regarding the high sorption capacity of coal materials found in soils can exert a controlling influence on contaminant transport. Designers of in situ remediation systems should be cautioned that 1) it is not reasonable to assume that sorption capacity and hydraulic conductivity are related, 2) sorption capacity and hydraulic conductivity are critical measurements for contaminant site characterization and subsequent transport modeling, 3) estimating sorption capacity from organic carbon measurement may lead to greater errors than performing sorption isotherms, and 4) it is more important to characterize vertical heterogeneity rather than horizontal heterogeneity because both sorption and hydraulic conductivity are correlated across longer distances in the horizontal plane.     

The chemical and biogenotoxic characterization of organic xenobiotics in aquatic sediment materials 1. The application and comparison of chemically non-specific and biogenotoxic methods

The aim of this work was to evaluate the Ames assay and mixed function oxidase (MFO)-Induct Test used in parallel with chemical group tests (ECD fingerprint and PAH estimation) for the characterization of the organic pollution of water sediment materials. Sediment materials were collected from “clean” and relatively heavily polluted locations in the Middle Adriatic Sea, and from some locations in continental Croatia polluted with wastewaters from different enterprises. Characterization of the organic extracts of the sediment materials investigated was performed chemically using UV spectrofluorometry for the determination polyaromatic hydrocarbons (PAH) and gas chromatography for the determination of volatile EC detector sensitive materials. Genotoxic analysis of the extracts was performed using the MFO-Induct Test and mutagenicity testing using the Standard Plate Incorporation Test as described by Maron and Ames with Salmonella typhimurium TA 98. Measurement of the BaPMO enzyme activity in the livers of carp treated i.p. with total extracts of the sediment investigated confirmed that the methanol extracts generally contained more inducing matter than the petroleum ether extracts. Ames assay showed that for all the samples following the elimination of the sulfur, there was an increase in the number of revertants in comparison to the control number, which indicates that the samples contained mutagenic substances. The larger doses of extracts generally demonstrated cytotoxicity, as evidenced by a reduced number of spontaneous revertants in the Salmonella/Microsome Test. Investigation of the correlation of the chemical parameters with the biological parameter showed that the induction of BaPMO exhibited a statistically significant correlation with the level of the ECD fingerprint of the petroleum ether sediment extract.     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.     

Free ‐ living animals as indicators of environmental pollution by chlorinated hydrocarbons

As some species of game and free‐living animals promptly respond to ecosystem damage by a reaction that is easy to interpret, they are important ecological indicators in assessing the total contamination of the environment. Consumers of the highest order like predators, predatory and fish‐eating birds are among the most important bioindicators of environmental contamination by chlorinated hydrocarbons and PCB.

Data on chlorinated hydrocarbons and PCB levels were collected throughout 1988–1992 and obtained from 16 species of free‐living animals from 9 protected areas of Slovakia. Muscle tissue, liver, kidney and egg samples were examined for HCB, HCH isomers, DDT and its analogues, and PCB.

Levels of organic chlorinated contaminants reveal a decreasing tendency and thus cease to be a toxicologically important risk factor in game, with the exception of predatory birds, as significant values have been recorded in their eggs and reproductive organs.     

普通小球藻引发水中苯胺光降解的研究

研究了普通小球藻引发水中苯胺的光降解 ,结果表明 :在 2 5 0W高压汞灯 (λ≥365nm)的照射下 ,藻浓度为 2 0× 1 0 1 0 个·1 - 1 时 ,苯胺的光降解率可达 37% ;苯胺浓度为0 0 0 4— 0 0 2mmol·l- 1 范围内 ,苯胺的光降解速率与初始浓度的降低成反比 ,反应是假一级 .另外 ,还研究了光强、藻悬浮液浓度和苯胺初始浓度等对反应体系的影响     

A History of Dry Cleaners and Sources of Solvent Releases from Dry Cleaning Equipment

Approximately 25, 000-35, 000 dry cleaning facilities currently operate in the U.S. The release of perchloroethylene and other solvents from these establishments represents a major source of soil and groundwater contamination. The manner in which dry cleaning solvents escape from dry cleaning plants is, for all practical purposes, identical for chlorinated and petroleum hydrocarbon solvents and is related to one of the following events: the catastrophic failure of a component of the dry cleaning system, the improper installation, operation or maintenance of the dry cleaning equipment or a combination of all of these causes. Acceptable customs, codes and regulations can also dictate what is authorized for operation of a dry cleaning facility in a particular community, geographic area during a particular time frame. Environmental litigation dealing with the origin of a solvent release from dry cleaners tends to focus on the design and manufacture of dry cleaning industry machines such as washers, washer extractors, tumblers, solvent filters, water separators, stills and spotting boards. A thorough analysis of the daily operations of dry cleaners often reveals that poor maintenance, failure to follow the manufacturer's instructions and the actions of the operator are the most likely causes of soil and groundwater pollution. In order to forensically evaluate the most probable origins of a solvent release and to examine issues regarding liability, a thorough understanding of the history of dry cleaning and a detailed analysis of the operation and maintenance of the dry cleaning equipment are necessary. The discovery of solvent plumes in the vicinity of dry cleaning plants may suggest that the solvent source is the dry cleaning plant; however, the presence of these plumes does not necessarily indicate that the dry cleaning equipment was defectively designed or manufactured. A thorough review of the type of equipment used over the life of the dry cleaning plant and verifiable solvent mileage records frequently indicates that operators of the plant have disposed of solvent and contaminated solids into the municipal sewer or on ground surfaces.     

Was Contamination of Southern California Groundwater By Chlorinated Solvents Foreseen?

The historical record does not support the argument that the cause of widespread groundwater contamination by chlorinated solvents in southern California was an inability to anticipate or detect the problem. The propensity of industrial wastes, including chlorinated solvents, to contaminate groundwater was understood by the 1940s in southern California. This understanding was not limited to a small group of specialists, but extended to regulators, industry, and the interested public. Industrial waste disposal was deregulated in 1949 as a result of lobbying by industry, despite a warning from the director of the State Health Department that such action would create "a backlog of water pollution over the State that will constitute a plague comparable to the air pollution in Los Angeles". Regulators warned specifically about the danger that groundwater pollution in the San Fernando and San Gabriel valleys would result from improper disposals of industrial chemicals, and solvents were identified as major contaminants in the scientific literature. Analytical methods to detect chlorinated solvents in groundwater at the concentrations found near the DNAPL (dense non-aqueous phase liquids) source zones have been well known since at least 1950, and a method with a detection limit of 10 w g/L was published as early as 1953.     

Assessment of aquatic experimental versus predicted and extrapolated chronic toxicity data of four structural analogues

The present study was developed to assess the chronic toxicity predictions and extrapolations for a set of chlorinated anilines (aniline (AN), 4-chloroaniline (CA), 3,5-dichloroaniline (DCA) and 2,3,4-trichloroaniline (TCA)). Daphnia magna 21 d chronic experimental data was compared to the chronic toxicity predictions made by the US EPA ECOSAR QSAR tools and to acute-to-chronic extrapolations. Additionally, Species Sensitivity Distributions (SSDs) were constructed to assess the chronic toxicity variability among different species and to investigate the acute versus chronic toxicity in a multi-species context.Since chlorinated anilines are structural analogues with a designated polar narcotic mode of action, similar toxicity responses were assumed. However, rather large interchemical and interspecies differences in toxicity were observed. Compared to the other three test compounds, TCA exposure had a significantly larger impact on growth and reproduction of D. magna. Furthermore, this study illustrated that QSARs or a fixed ACR are not able to account for these interchemical and interspecies differences. Consequently, ECOSAR was found to be inadequate to predict the chronic toxicity of the anilines and the use of a fixed ACR (of 10) led to under of certain species. The experimental ACRs determined in D. magna were substantially different among the four aromatic amines (ACR of 32 for AN, 16.9 for CA, 5.7 for DCA and 60.8 for TCA). Furthermore, the SSDs illustrated that Danio rerio was rather insensitive to AN in comparison to another fish species, Phimphales promelas. It was therefore suggested that available toxicity data should be used in an integrative multi-species way, rather than using individual-based toxicity extrapolations. In this way, a relevant overview of the differences in species sensitivity is given, which in turn can serve as the basis for acute to chronic extrapolations.