表面活性剂Burkholderia xenoborans LB400体系对低氯代PCBs的好氧强化降解

增强多氯联苯(PCBs)的水溶性是强化PCBs微生物降解的主要控制因素之一,本研究选取了PCB5(2,3-CB)和PCB31(2,4',5-CB)作为低氯代PCBs的典型代表,以曲拉通100(TX-100)、吐温80(Tween 80)、鼠李糖脂粗提物(RL crude)3种表面活性剂和β-环糊精( HPCD)联合Burkholderia xenoνorans LB400构建PCBs好氧降解体系,测试了它们对PCB5和PCB31的溶出率及微生物生长的影响.结果表明,TX-100(CMC＝194 mg·L-1)、 Tween 80(CMC＝13.1 mg·L-1)、 RL crude(CMC＝50 mg·L-1)浓度在1~7 CMC 时和 HPCD 浓度在500~1500 mg·L-1时对 PCB5和 PCB31溶出率分别达到54.7％~100％、59.8％~100％;10.5％~40.8％、6.8％~31.6％;10.3％~19.9％、3.3％~11.6％和19.5％~34.2％、4.2％~10.7％. TX-100浓度在1~7 CMC时对B. xenoνorans LB400生长的抑制率达到30.3％~45.8％,而Tween 80浓度在0.1~1 CMC时对其生长的抑制率为10.0％~15.4％; RL crude 本身能作为底物促进 LB400的生长,而 HPCD 对其生长无明显影响. B. xenoνorans LB400对PCB31(5 mg·L-1)的降解效率在添加表面活性剂后有不同程度的提高：TX-100,23.7％~65.5％; Tween 80,14.6％~44.3％;RL crude,9.6％~27.2％;HPCD,15.3％~20.7％;而表面活性剂对PCB5(10 mg·L-1)的降解效率则无明显影响.表面活性剂主要通过增大溶液中PCBs-表面活性剂的胶束浓度来提高LB400对PCBs的降解效率,在水溶液培养体系中当设置TX-100和Tween 80浓度分别在1和7 CMC时,PCB31的降解效率达到100％和81.7％,而此时B. xenoνorans LB400生长的抑制率为30.3％和5.4％.     

Monitoring and Assessment of Persistent Organochlorine Residues in Sediments from the Daliaohe River Watershed, Northeast of China

Surface sediment samples from 12 sites of the three selected rivers in Daliaohe River watershed (Hunhe River, Taizihe River and Daliaohe River) were analyzed with the objective of establishing sources and hazard of the organochlorinae pesticides (OCPs) and polychlorinated biphenyl (PCBs) in surface sediments. The total concentrations of OCPs varied from 3.06 to 23.24 ng g⁻¹. ∑HCH (α-HCH, β-HCH, δ-HCH, γ-HCH), ∑DDT (p, p′-DDE, p, p′-DDD, o, p′-DDT, p, p′-DDT) and ∑Cyclodiene (Heptachlor, Aldrin, Heptachlor epoxide, Dieldrin, Endrin) ranged from 1.86 to 21.48, 0.5 to 2.81 and 0.56 to 1.53 ng g⁻¹, respectively. Results of OCPs also illustrate that the most dominant pollutants among the OCPs was ∑HCH, and γ-HCH was the most dominant isomer in HCH, which was evidence of recent input of lindane. It possibly came from the runoff of polluted soils and long-scale transportation. Total PCB concentrations ranged between 1.88 and 16.88 ng g⁻¹. The peak concentrations of PCBs were found in sediments from station T5 and D3, which are in the vicinity of industrial areas and ferry, respectively. These data show a moderate level of OCPs and PCBs contaminations compared to that in other countries.     

废旧电容器存放点多氯联苯的污染特征

采用气相色谱-电子捕获检测器测定废旧电容器存放地点附近的土壤和植物中多氯联苯(PCBs)的含量.分析了羊茅草(Festuca.L)的叶和根中PCBs的变化,应用多元线性回归方法定量判别了PCBs污染类型,进而探讨了PCBs的分布特征.结果表明,存放点PCBs污染水平较高,污染类型与Aroclor 1248相似.随着离污染点距离的增加,PCBs浓度急剧下降.污染类型逐步偏离Aroclor 1248,二氯和三氯联苯的百分比升高,四氯和五氯联苯下降.表现出水相和气相传输的作用,在一般情况下,水相传输起主导作用.另外,PCBs在羊茅草的叶和根中浓度的比值有上升的趋势.这种变化趋势和PCBs大气传输过程相关联,大气传输的贡献随着距离的增加PCBs浓度水平逐步下降而逐步显现.     

中国部分水域沉积物中多氯联苯污染物的空间分布、污染评价及影响因素分析

对中国水域沉积物中多氯联苯污染的空间分布、污染程度、污染来源及影响因素进行了研究,并对沉积物中多氯联苯的污染进行了初步的风险评价.结果表明,部分地区多氯联苯污染较严重,东北的松花江、大连湾、河北保定地区、中部的鸭儿湖、南部的珠江流域和台湾地区沉积物中有较高的多氯联苯平均浓度,其余地区沉积物中多氯联苯的污染水平相对较低.多氯联苯污染较严重的地区多为一些港口、工农业发达的区域、发生过泄漏的多氯联苯退役设备封存点和多氯联苯设备非法拆卸的地区,污染特征表现为点源污染的形式.对珠江三角洲地区的研究表明,多氯联苯污染的空间分布与当地水文地质地貌条件、社会经济发展水平、历史及管理等因素相关.水流交换畅通、水体流量大、沉积物含沙质较多、适当的管理等会减轻多氯联苯污染;人口密集、工业发达、有历史或当前排污、航运繁忙等会导致多氯联苯污染加重.     

Recent levels of organochlorine pesticides and polychlorinated biphenyls in sediments of the sewer system in Hanoi, Vietnam

The occurrence, temporal trend, sources and toxicity of PCBs and organochlorine pesticides were investigated in sediment samples from the sewer system of Hanoi City, including the rivers Nhue, To Lich, Lu, Set, Kim Nguu and the Yen So Lake. In general, the concentrations of the pollutants followed the order DDTs > PCBs > HCHs (β-HCH) > HCB. However, the pollution pattern was different for the DDTs and PCBs when the sampling locations were individually evaluated. The concentrations of the DDTs, PCBs, HCHs, and HCB ranged from 4.4 to 1100, 1.3 to 384, <0.2 to 36 and <0.2 to 22 ng/g d.w., respectively. These levels are higher than at any other location in Vietnam. Compared to measurements from 1997, the DDTs, PCBs, β-HCH and HCB levels show an increasing trend with DDT/DDE ratios, indicating very recent inputs into the environment although these persistent compounds are banned in Vietnam since 1995.     

Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Spatial distribution of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs) in an e-waste dismantling region in Southeast China: Use of apple snail (Ampullariidae) as a bioindicator

Fengjiang is a large e-waste dismantling site located in southeast China. In this paper, apple snail and soil samples were collected from this e-waste dismantling site and 25 vicinal towns to investigate the contamination status, spatial distributions and congener patterns of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs). Total PCB concentrations in apple snails (3.78-1812 ng g⁻¹ dry weight (dw)) were significant higher than that in soil samples (0.48-90.1 ng g⁻¹ dw). PBDE (excluding BDE 209) concentrations in apple snail and soil samples ranged from 0.09 to 27.7 ng g⁻¹ dw and 0.06 to 31.2 ng g⁻¹ dw, respectively. Concentrations of PCBs and PBDEs in snails and soils correlated negatively with the distance from Fengjiang. Both the concentrations and profiles of the pollutants were significantly correlated (p < 0.05) between the snail and soil samples, indicating the suitability of apple snail as a reliable bioindicator for PCBs and PBDEs contamination in this region. Relatively high concentrations of PCBs and PBDEs at locations far from e-waste dismantling sites implied that these pollutants have been transported to surrounding regions.     

Dietary patterns and blood levels of PCDDs, PCDFs, and dioxin-like PCBs in 1656 Japanese individuals

The association between dietary patterns and blood dioxin levels has not been fully investigated. The present study population consisted of 755 men and 901 women (aged 15-73 years) living in 90 different areas of 30 prefectures of Japan. Dietary habits were assessed by inquiring about the consumption frequency of 28 foods, food groups and beverages. In addition, the blood levels of 29 polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzo-furans (PCDFs), and dioxin-like polychlorinated biphenyl (DL-PCBs) congeners were determined by high-resolution gas chromatography/mass spectrometry. The median total toxicity equivalent (TEQ) in the blood, which was calculated on the basis of the toxicity equivalency factors of WHO (2005), was 16 pg TEQ g⁻¹ lipid. Principal component analysis identified five dietary patterns: Healthy diet (high intake of vegetables and fruits); Meat/High fat intake (high intake of meat, meat products, and eggs); Seafood and Alcohol (high intake of fish, shellfish, and alcoholic beverages); Miscellaneous; and Milk products and Alcohol intake (high intake of milk, Milk products, and alcoholic beverages). After adjusting for sex, age, body mass index, and smoking habits, the Seafood and Alcohol pattern scores were significantly related to higher blood levels of total TEQ and PCDDs/PCDFs/DL-PCBs, and the Milk products and Alcohol pattern scores were correlated with higher blood levels of DL-PCBs. More detailed analysis showed that the intake frequencies for alcoholic beverages and seafood were independently and positively associated with total TEQ and the TEQ of PCDFs and DL-PCBs. The association between alcoholic beverage intake and PCDDs was also significant. Analysis of dietary patterns may be useful for identifying the dietary characteristics of individuals with a high dioxin body burden.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.