Two-dimensional numerical modeling of Sr transport in an unsaturated Chinese loess under artificial sprinkling

⁹⁰Sr is a fission byproduct of uranium and plutonium, and it presents a major health problem in the environment. A field test on the transport of various radionuclides including ⁹⁰Sr in an unsaturated Chinese loess was conducted under artificial rain conditions from July 1997 to August 2000. The vertical concentration distribution of ⁹⁰Sr displayed an unusual profile of double concentration peaks, which were separated by a thin (0.7 cm) source layer. In order to interpret the double-peak concentration profile, the transport of ³H and ⁹⁰Sr in the unsaturated Chinese loess under artificial sprinkling conditions was simulated using WATERM, a numerical code for simulating flow field, and NESOR, also a numerical code but for simulating nuclide migration. The models were able to adequately simulate the double-peak concentration profile. The observation suggested that the fine arenaceous quartz layer, though 0.7 cm thick, formed a capillary barrier together with the local loess, which prevented water from penetrating. A significant discrepancy was observed between the model-fitted distribution coefficient (K_d) of ⁹⁰Sr and that determined from independent laboratory experiments, which can be attributed to a number of factors such as the capillary barrier effect, solution-to-solid ratio and soil water content. Therefore, when the model is used for predictive purposes where K_d is used as an input parameter, K_d must be determined under well controlled conditions by taking into account these factors as well as the heterogeneity in the field.     

Hydraulic anisotropy characterization of pneumatic-fractured sediments using azimuthal self potential gradient

The pneumatic fracturing technique is used to enhance the permeability and porosity of tight unconsolidated soils (e.g. clays), thereby improving the effectiveness of remediation treatments. Azimuthal self potential gradient (ASPG) surveys were performed on a compacted, unconsolidated clay block in order to evaluate their potential to delineate contaminant migration pathways in a mechanically-induced fracture network. Azimuthal resistivity (ARS) measurements were also made for comparative purposes. Following similar procedures to those used in the field, compressed kaolinite sediments were pneumatically fractured and the resulting fracture geometry characterized from strike analysis of visible fractures combined with strike data from optical borehole televiewer (BHTV) imaging. We subsequently injected a simulated treatment (electrolyte/dye) into the fractures. Both ASPG and ARS data exhibit anisotropic geoelectric signatures resulting from the fracturing. Self potentials observed during injection of electrolyte are consistent with electrokinetic theory and previous laboratory results on a fracture block model. Visual (polar plot) analysis and linear regression of cross plots show ASPG lobes are correlated with azimuths of high fracture strike density, evidence that the ASPG anisotropy is a proxy measure of hydraulic anisotropy created by the pneumatic fracturing. However, ARS data are uncorrelated with fracture strike maxima and resistivity anisotropy is probably dominated by enhanced surface conduction along azimuths of weak ‘starter paths’ formed from pulverization of the clay and increases in interfacial surface area. We find the magnitude of electrokinetic SP scales with the applied N₂ gas pressure gradient (ΔPN₂) for any particular hydraulically-active fracture set and that the positive lobe of the ASPG anomaly indicates the flow direction within the fracture network. These findings demonstrate the use of ASPG in characterizing the effectiveness of (1) pneumatic fracturing and (2) defining likely flow directions of remedial treatments in unconsolidated sediments and rock.     

A dynamic contaminant fate model of organic compound: a case study of Nitrobenzene pollution in Songhua River, China

A one-dimensional dynamic contaminant fate model, coupling kinematic wave flow option with advection-dispersion-reaction equation, has been applied to predict Nitrobenzene pollution emergency in Songhua River, China that occurred on November 13, 2005. The model includes kinetic processes including volatilization, photolysis and biodegradation, and diffusive mass exchange between water column and sediment layer as a function of particles settling and resuspension. Four kinds of quantitative statistical tests, namely Nash-Sutcliffe efficiency, percent bias, ratio of root-mean-square to the standard deviation of monitoring data and Theil’s inequality coefficient, are adopted to evaluate model performance. The results generally show that the modeled and detected concentrations exhibit good consistency. Flow velocity in the river is most sensitive parameter to Nitrobenzene concentration in water column based on sensitivity analysis of input parameters. It indicates flow velocity has important impact on both distribution and variance of contaminant concentration. The model performs satisfactory for prediction of organic pollutant fate in Songhua River, with the ability to supply necessary information for pollution event control and early warning, which could be applied to similar long natural rivers.     

Residues levels of organochlorine pesticide in cow's milk from industrial farms in Hidalgo,Mexico

A survey was carried out from 2008 to 2010 to determine the concentrations of 16 organochlorine pesticide residues (OPRs) from Tizayuca, Hidalgo, Mexico. Organochlorine residue determinations were made from milk fat, using chromatographic cleanup and analysis by gas chromatography with an electron capture detector. The OPR concentrations found were from below the detection limit (DL) to 0.91 ng g^?1 in 2008, DL to 0.38 ng g^?1 in 2009 and DL to 0.59 ng g^?1 in 2010. In general concentrations of organochlorine pesticides were higher in the wet season (3.37 ng g^?1 and 4.79 ng g^?1) than the dry season (1.92 ng g^?1 and 2.71 ng g^?1) for 2009 and 2010, due to control of pests in the pasture and sheds. According to Codex Alimentarius regulations, individual pesticides did not exceed the permissible limits, which for example were 10 μg kg^?1 for alpha hexachlorocyclohexane (HCH) and endosulfan I, 20 μg kg^?1 for p,p’-DDT, and 6 μg kg^?1 for dieldrin, endrin and heptachlor. A reduction of organochlorine pesticide concentrations in cow's milk was noted, indicating that the Mexican government has achieved reduction or elimination of some organochlorine pesticides in response to global agreements on persistent organic pollutants.     

Biodegradation during contaminant transport in porous media: 1. mathematical analysis of controlling factors

Interest in coupled biodegradation and transport of organic contaminants has expanded greatly in the past several years. In a system in which biodegradation is coupled with solute transport, the magnitude and rate of biodegradation is influenced not only by properties of the microbial population and the substrate, but also by hydrodynamic properties (e.g., residence time, dispersivity). By nondimensionalizing the coupled-process equations for transport and nonlinear biodegradation, we show that transport behavior is controlled by three characteristic parameters: the effective maximum specific growth rate, the relative half-saturation constant, and the relative substrate-utilization coefficient. The impact on biodegradation and transport of these parameters, which constitute various combinations of factors reflecting the influences of biotic and hydraulic properties of the system, are examined numerically. A type-curve diagram based on the three characteristic parameters is constructed to illustrate the conditions under which steady and non-steady transport is observed, and the conditions for which the linear, first-order approximation is valid for representing biodegradation. The influence of constraints to microbial growth and substrate utilization on contaminant transport is also briefly discussed. Additionally, the impact of biodegradation, with and without biomass growth, on spatial solute distribution and moments is examined.     

Do fish growth rates correlate with PCB body burdens?

We evaluated whether growth rates of six fish species correlated with PCB concentrations in a moderately-to-heavily polluted freshwater ecosystem. Using a large dataset (n = 984 individuals), and after accounting for growth effects related to fish age, habitat, sex, and lipids, growth correlated significantly, but positively with lipid-corrected PCB concentrations for 4 of 6 species. Remaining species showed no correlations between growth and PCBs. Comparisons with regional, lentic growth averages for four species confirmed growth was on par and in three of four cases higher than regional averages in the PCB-polluted ecosystem. We conclude that for these species, at the range of concentrations examined, these PCBs do not exert negative impacts on growth. Rather, factors often cited as influential to growth were also driving growth trends in this study. Future studies that evaluate whether pollution affects growth must account for major growth drivers prior to attributing growth differentials to pollution alone.     

Investigations of Contaminated Fluvial Sediment Deposits: Merging of Statistical and Geomorphic Approaches

Concentrations of contaminants in sediment deposits can have large spatial variability resulting from geomorphic processes acting over long time periods. Thus, systematic (e.g., regularly spaced sample locations) or random sampling approaches might be inefficient and/or lead to highly biased results. We demonstrate the bias associated with systematic sampling and compare these results to those achieved by methods that merge a geomorphic approach to evaluating the physical system and stratified random sampling concepts. By combining these approaches, we achieve a more efficient and less biased characterization of sediment contamination in fluvial systems. These methods are applied using a phased sampling approach to characterize radiological contamination in sediment deposits in two semiarid canyons that have received historical releases from the Los Alamos National Laboratory. Uncertainty in contaminant inventory was used as a metric to evaluate the adequacy of sampling during these phased investigations. Simple, one-dimensional Monte Carlo simulations were used to estimate uncertainty in contaminant inventory. We also show how one can use stratified random sampling theory to help estimate uncertainty in mean contaminant concentrations.     

臭氧对中温循环冷却水系统的缓蚀性能研究

循环冷却水系统中普遍存在结垢腐蚀现象,目前常用的解决方法是在系统中加入缓蚀阻垢药剂,臭氧(O3)对循环水冷却系统同时具备阻垢、缓蚀、杀菌等多重功能。采用臭氧处理中温循环冷却水,研究在不同臭氧投加量时系统的腐蚀情况,确定最佳投加量。结果表明:当臭氧投加量为4.5 mg/L时,20碳钢和铸铁的缓蚀能力最佳。20碳钢腐蚀率最低为0.228 mm/a,比空白对照组降低了75%;铸铁的最低腐蚀率为0.282 mm/a,比空白对照组降低了61.5%。当臭氧投加量为9.0 mg/L时,镀锌试片的腐蚀率在0.206~0.275 mm/a,比空白对照组降低了38.2%左右,缓蚀效果较为明显。     

日本琵琶湖流域污水超深度处理及污泥处置

以日本琵琶湖流域东北部净化中心为例,介绍了日本琵琶湖流域市政污水处理概况,重点阐述了以投加絮凝剂的多段硝化脱氮法为核心生物工艺的"超深度"处理技术和以"焚烧—熔融"为核心工艺的污泥资源化处置技术,为我国市政污水的深度处理和污泥处置提供了技术和发展借鉴。     

顶空被动加标系统的多介质动力学模型

使用多介质模型建模方法,构建了针对疏水性液体物质的顶空被动加标系统的动力学模型,以浮萍生长抑制试验系统和鱼类胚胎毒性试验系统为例,得出了3种不同性质的疏水性液体物质正壬烷、十甲基环五硅氧烷（D5）和邻苯二甲酸（2-乙基己基）酯（DEHP）在顶空被动加标系统中的浓度变化,并使用实测浓度对模型进行验证.结果表明,正壬烷和D5在两类系统中平衡24h后,水中浓度便已达到完全平衡时浓度的80%以上,而DEHP的平衡时间很长,不适合使用顶空被动加标系统开展试验,原因是DEHP的挥发性极低.实测浓度和模型预测结果偏差较小.敏感性分析表明,试验系统参数中容器直径对待测物质在水中浓度影响较大,因此可通过调整容器直径来缩短平衡时间,或提高平衡后化学物质在水中的浓度.使用所构建的模型可确定试验系统平衡时间、水中待测物质浓度和待测物质添加体积是否满足试验需求,并可通过敏感性分析来优化试验系统参数,提升试验效率和质量.以上结果完善了顶空被动加标系统应用的理论基础.