多层商住楼抗震设防投资效益评价

针对不同结构多层商住楼的具体特征，运用结构易损性分析方法对各类房屋未来的震害情况进行了分析，给出了震害损失与投资效果的综合评价方法，为进行这类房屋的结构选型、设计及工程投资的优化提供一定的理论依据。     

一种DSP+FPGA实时信号处理系统

简要叙述了常用的信号处理系统的类型与处理机结构,介绍了正逐步得到广泛应用的DSP+FPGA处理机结构,在此基础上提出了一种实时信号处理的线性流水阵列,并举例说明了该结构的具体实现,最后分析说明了此结构的优越性。     

县域经济所有制结构的调整

县域经济的所有制结构所表现出来的经济实体形式包括县属地方国有经济、多种形式的集体经济和民营经济,探讨了县域经济所有制结构的形式及其在市场经济中的作用.     

混合接种PN与PN/A颗粒污泥快速启动连续流自养生物脱氮反应器

在连续流条件下,快速培养亚硝化-厌氧氨氧化（PN/A）颗粒污泥是实现污水高效生物脱氮处理的关键技术. 与PN/A污泥相比,亚硝化（PN）颗粒污泥具有生长周期短、易于批量化培养的优点,并可作为富集厌氧氨氧化菌（AMX）的载体. 在3个完全混合流反应器（R1~R3）中,分别按照质量比3∶1、1∶1和1∶3混合接种PN/A和PN颗粒污泥,并通过设置高氨氮负荷、短水力停留时间和强水力剪切条件,成功启动了连续流自养生物脱氮工艺. 结果表明,尽管R3的启动时长较R1和R2更长,但污泥接种比并未显著影响连续流反应器在稳定状态下的脱氮性能,总氮去除负荷均可达到2.6 kg·（m³·d）^-1以上. 接种的PN颗粒污泥通过提供好氧氨氧化菌种（AOB）,为AMX生长供给了充足的亚硝态氮基质,充分发挥了培养PN/A颗粒污泥的前驱体作用. 由高通量测序结果可知,R1~R3中成熟颗粒的微生物丰度和多样性指数均明显高于接种污泥. AOB（Nitrosomonas属）和AMX（Candidatus Kuenenia和Brocadia属）与Chloroflexi、Bacteroidetes和Chlorobi等异养菌门是驱动自养生物脱氮和维持颗粒结构稳定的关键菌群. 总之,PN与PN/A颗粒污泥的混合接种是快速启动连续流自养脱氮工艺的可行策略,对工程应用具有指导意义.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

聚苯乙烯基硫代磺酸钾树脂的合成及其与卤代烃的反应

由聚苯乙烯基磺酰氯树脂与硫化氢钾反应制备聚苯乙烯基硫代磺酸钾树脂（Ｉ）,树脂Ｉ与亲电的卤代烃反应,生成聚苯乙烯基硫代磺酸酯树脂（Ⅱ）,树脂Ⅱ经过乙硫醇处理,使卤代烃结构部分以不对称二硫醚的形式游离下来,用ＧＣ／ＭＳ对其结构进行鉴定。从不对称二硫醚的结构可推导出原卤代烃的结构,所制备的聚苯乙烯基硫代磺酸钾树脂的转化效率为１．１１ｍｍｏｌ·ｇ＾－１。     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

活性碳纤维改性技术研究进展

介绍了活性碳纤维(ACF)的孔结构及表面官能团,综述了国内外ACF改性技术的研究现状.ACF的改性主要包括孔结构调控和表面化学改性,表面化学改性包括氧化还原法、表面负载法、浸渍法、热处理法、远程等离子体处理法、微波辐照法等,也可将多种方法结合来对ACF进行改性,以改善和提高ACF的吸附性能.在总结现有研究的基础上,对ACF改性技术发展趋势进行了展望.     

非点源污染模型AnnAGNPS在三峡库区林农复合小流域模拟效果评定

应用连续农业非点源污染AnnAGNPS模型(Annualized AGricultural NonPoint Source Model)模拟三峡库区林农复合小流域的径流、泥沙和营养物输出,以2003年和2004年的小流域观测数据对模型分别进行校准和验证,并以统计参量决定系数(R2)、Nash-Sutcliffe效率系数(E)和相对误差(VE)对模拟结果进行评定.结果表明,径流量模型模拟结果误差在可接受范围之内,模型校准期模拟值VE值为5.0%(R2=0.93,p<0.05),验证期内模型VE值为6.7%(R2=0.90,p<0.05);与径流模拟比较,泥沙模拟结果精度较低,校准期内模型VE值为15.1%(R2=0.63,p<0.05),验证期内模型VE值为26.7%(R2=0.59,p<0.05);次降水较小,产生径流和泥沙较少时,模型模拟值则偏高,反之则偏低.氮输出模拟决定系数R2值0.68(p<0.05),略高于磷输出模拟决定系数(R2=0.65,p<0.05).模型对径流输出的模拟精度高于对泥沙和营养物的输出模拟.在三峡库区农林复合小流域应用AnnAGNPS模型模拟农业非点源污染输出满足流域管理要求.