快速渗滤土地处理法去除污水中挥发卤代烃的效率研究

本文就不同周期和布水率对快速渗滤系统中挥发性有机物去除率的影响进行了探讨。通过该法与六种常用的污水处理技术对挥发性卤代烃去除率的比较,表明快速渗滤土地处理法更为行之有效。     

Integration of traditional and innovative characterization techniques for flux-based assessment of Dense Non-aqueous Phase Liquid (DNAPL) sites

Key attributes of the source zone and the expanding dissolved plume at a trichloroethene (TCE) site in Australia were evaluated using trends in groundwater monitoring data along with data from on-line volatile organic compound (VOC) samplers and passive flux meters (PFMs) deployed in selected wells. These data indicate that: (1) residual TCE source mass in the saturated zone, estimated using two innovative techniques, is small ( 10 kg), which is also reflected in small source mass discharge ( 3 g/day); (2) the plume is disconnecting, based on TCE concentration contours and TCE fluxes in wells along a longitudinal transect; (3) there is minimal biodegradation, based on TCE mass discharge of  6 g/day at a plume control plane  175 m from source, which is also consistent with aerobic geochemical conditions observed in the plume; and (4) residual TCE in the vadose zone provides episodic inputs of TCE mass to the plume during infiltration/recharge events. TCE flux data also suggest that the small residual TCE source mass is present in the low-permeability zones, thus making source treatment difficult. Our analysis, based on a synthesis of the archived data and new data, suggests that source treatment is unwarranted, and that containment of the large TCE plume ( 1.2 km long,  0.3 km wide; 17 m deep;  2000–2500 kg TCE mass) or institutional controls, along with a long-term flux monitoring program, might be necessary. The flux-based site management approach outlined in this paper provides a novel way of looking beyond the complexities of groundwater contamination in heterogeneous domains, to make intelligent and informed site decisions based on strategic measurement of the appropriate metrics.     

Single- and dual-porosity modelling of flow in reclaimed mine soil cores with embedded lignitic fragments

Lignitic mine soils represent a typical two-scale dual-porosity medium consisting of a technogenic mixture of overburden sediments that include lignitic components as dust and as porous fragments embedded within a mostly coarse-textured matrix. Flow and transport processes in such soils are not sufficiently understood to predict the course of soil reclamation or of mine drainage. The objective of this contribution is to identify the most appropriate conceptual model for describing small-scale heterogeneity effects on flow on the basis of the physical structure of the system. Multistep flow experiments on soil cores are analyzed using either mobile–immobile or mobile–mobile type 1D dual-porosity models, and a 3D numerical model that considers a local-scale distribution of fragments. Simulations are compared with time series' of upward infiltration and matric potential heads measured at two depths using miniature tensiometers. The 3D and the 1D dual-permeability models yielded comparable results as long as pressure heads are in local equilibrium; however, could describe either the upward infiltration or the matric potential curves but not both at the same time. The mobile–immobile type dual-porosity model failed to describe the data. A simultaneous match with pressure heads and upward infiltration data could only be obtained with the 1D dual-permeability model (i.e., mobile–mobile) by assuming an additional restriction of the inter-domain water transfer. These results indicate that for unsaturated flow conditions at higher matric potential heads (i.e., here >− 40 hPa), water in a restricted part of the fragment domain must be more mobile as compared to water in the sandy matrix domain. Closer inspections of the pore system and first neutron radiographic imaging support the hypothesis that a more continuous pore region exists at these pressure heads in the vicinity of the lignitic fragments possibly formed by fragment contacts and a lignitic dust interface-region between the two domains. The results suggest that the small-scale structure is too complex as to be represented by weighted contributions of individual components alone.     

污水湿地处理工艺优化组合设计

污水湿地处理系统是利用土壤、作物、微生物自然净化功能的生态工程技术。主要有水面湿地和渗滤湿地两种类型,在天津城市污水土地处理与利用系统研究的基础上,将两种工艺的优点进行优化组合,并应用于大港油田等污水湿地处理工程,运行结果表明：将水面湿地和渗滤湿地工艺优化组合设计的示范工程,具有提高水力负荷、减少运行费用、节省工程投资、处理效果稳定等特点,有利于处理工程的长期稳定运行。     

Comparison of Field Performance of Multiple Soil Moisture Sensors in a Semi‐Arid Rangeland1

Abstract:  Automated electronic soil moisture sensors, such as time domain reflectometry (TDR) and capacitance probes are being used extensively to monitor and measure soil moisture in a variety of scientific and land management applications. These sensors are often used for a wide range of soil moisture applications such as drought forage prediction or validation of large‐scale remote sensing instruments. The convergence of three different research projects facilitated the evaluation and comparison of three commercially available electronic soil moisture probes under field application conditions. The sensors are all installed in shallow soil profiles in a well instrumented small semi‐arid shrub covered subwatershed in Southeastern Arizona. The sensors use either a TDR or a capacitance technique; both of which indirectly measure the soil dielectric constant to determine the soil moisture content. Sensors are evaluated over a range of conditions during three seasons comparing responses to natural wetting and drying sequences and using water balance and infiltration simulation models. Each of the sensors responded to the majority of precipitation events; however, they varied greatly in response time and magnitude from each other. Measured profile soil moisture storage compared better to water balance estimates when soil moisture in deeper layers was accounted for in the calculations. No distinct or consistent trend was detected when comparing the responses from the sensors or the infiltration model to individual precipitation events. The results underscore the need to understand how the sensors respond under field application and recognize the limitations of soil moisture sensors and the factors that can affect their accuracy in predicting soil moisture in situ.     

Assessment of domestic water quality: case study, Beirut, Lebanon

In urban cities, the environmental services are the responsibility of the public sector, where piped water supply is the norm for urban household. Likewise, in Beirut City (capital of Lebanon) official water authorities are the main supplier of domestic water through a network of piping system that leaks in many areas. Beirut City and its suburbs are overpopulated since it is the residence of 1/3 of the Lebanese citizens. Thus, Beirut suffers deficiency in meeting its water demand. Water rationing, as a remedial action, is firmly established since four decades by the Lebanese Water Authorities. Consumers resorted then to private wells to supplement their domestic water needs. Consequently, household water quality is influenced by external factors relating to well water characteristics and internal factors depending on the types of the pipes of the distribution network and cross connections to sewer pipes. These factors could result in chemical and microbial contamination of drinking water. The objective of this study is to investigate domestic water quality variation in Beirut City emerging form the aforementioned factors. The presented work encircles a typical case study of Beirut City (Ras Beirut). Results showed deterioration pattern in domestic water quality. The predicted metal species and scales within the water pipes of distribution network depended on water pH, hardness, sulfate, chloride, and iron. The corrosion of iron pipes mainly depended on Mg hardness.     

SLUDGE APPLICATION EFFECTS ON RUNOFF,INFILTRATION, AND WATER QUALITY1

ABSTRACT: Land application of sewage sludge requires careful monitoring because of its potential for contamination of surface water and ground water. A rainfall simulator was used the investigate the effects of freshly applied sludge on infiltration, and on runoff of sediment and nutrients from agricultural crop lands. Rain was applied to 16 experimental field plots. A three-run sequence was used to simulate different initial moisture conditions. Runoff, sediment, and nutrient losses were monitored at the base of each plot during the simulated rainfall events. Sludge was surface applied and incorporated at conventionally-tilled plots and surface applied at no-till plots, at rates of 0, 75, 150 kg-N/ha. Steady-state infiltrability increased as a result of sludge application, although the no-till practice was more effective in increasing the infiltrability than the sludge application. No-till practices greatly reduced runoff, sediment, and nutrient losses from the sludge treated plots, relative to the conventional tillage practices. Incorporation of the sludge was effective in reducing nutrient yields at the conventionally-tilled plots. This effect was more pronounced during the third rainstorm, with wet initial conditions. Peak loadings of nutrients appeared during the rainstorm with wet initial conditions.     

REAL-TIME SOIL WATER MONITORING FOR OPTIMUM WATER MANAGEMENT1

Abstract: Efficient water resource management is one of the most important policy issues facing agriculture in Hawaii in the years ahead. Soil water sensors, multisensor capacitance probes (MCP), have been successfully used for different water management projects. These MCPs monitor water content at multiple depths and at various locations in real-time. The objectives of this study were to determine the effect of water content on field soil bulk density of Wahiawa silty clay tropical soil; measure field saturated hydraulic conductivity of this tropical soil: calibrate MCP system for this soil: and monitor and evaluate real-time soil water content variations under a tomato crop using the calibrated MCP system. Sensor calibration was conducted under laboratory conditions. Soil bulk density at different water contents and saturated hydraulic conductivity were measured on the field. Bulk density increased with increasing water content: there was a 30 percent bulk density increase as a result of 0.25 cm³ cm^-3 water content variation. Compared with the manufacturer's calibration, site specific laboratory calibration of MCP gave a more accurate determination of soil water. Field determined saturated hydraulic conductivity was higher than laboratory determined values reported in the literature for the same soil type. Real-time soil water content monitoring within the root zone showed substantial variations due to water input (irrigation and rainfall) and water output (evapotranspiration and deep percolations). However, water content variations were much further reduced in the soil layer below the root zone.     

降雨入渗对基坑工程安全性影响的研究

很多市政工程以及基坑工程在降雨入渗后 ,出现滑坡等事故 ,本文应用非饱和土壤水分运动基本理论 ,建立了降雨入渗模型并编制了计算程序。在计算模型中 ,考虑了降雨过程中土壤入渗能力的变化 ,在此基础上 ,采用非饱和土强度理论 ,编制了可考虑基质吸力影响的边坡安全系数计算程序 ;讨论了降雨强度、降雨持续时间、土壤初始含水量和土的渗透系数等参数对降雨入渗及边坡安全性的影响。     

EFFECT OF ORIENTATION OF SPATIALLY DISTRIBUTED CURVE NUMBERS IN RUNOFF CALCULATIONS1

ABSTRACT: The NRCS curve number approach to runoff estimation has traditionally been to average or “lump” spatial variability into a single number for purposes of expediency and simplicity in calculations. In contrast, the weighted runoff curve number approach, which handles each individual pixel within the watershed separately, tends to result in larger estimates of runoff than the lumped approach. This work proposes further enhancements that consider not only spatial variability, but also the orientation of this variability with respect to the flow aggregation pattern of the drainage network. Results show that the proposed enhancements lead to much reduced estimates of runoff production. A revised model that considers overland flow lengths, consistent with existing NRCS concepts is proposed, which leads to only mildly reduced runoff estimates. Although more physically‐based, this revised model, which accounts directly for spatially distributed curve numbers and flow aggregation, leads to essentially the same results as the original, lumped runoff model when applied to three study watersheds. Philosophical issues and implications concerning the appropriateness of attempting to disaggregate lumped models are discussed.