表面活性剂辅助离子液体预处理稻秆的酶解动力学与结构变化分析

以稻秆为原料进行酶解研究,考察了纤维素酶和β-葡萄糖苷酶单独作用及协同作用对稻秆酶解还原糖产量的影响,以确定最佳酶体系,并研究在最佳酶体系中不同种类表面活性剂辅助离子液体对稻秆酶解的影响和动力学特征,最后通过稻秆成分分析、FTIR、XRD、SEM对预处理前后的稻秆结构、结晶性进行了分析比较.结果表明,纤维素酶与β-葡萄糖苷酶具有协同作用,而且在最佳酶体系中,与未处理稻秆及单独离子液体预处理相比,不同种类表面活性剂辅助离子液体预处理的稻秆在酶水解48 h时纤维转化率分别增加40%~85%、10%~31%,并且预处理对反应速率的提高有促进作用.     

Photochemical behaviour of musk tibetene

BACKGROUND: Synthetic musk compounds are widely used as additives in personal care and household products. The photochemical degradation of musk tibetene in aqueous solutions or in acetonitrile/water mixtures under different conditions was studied in order to assess its environmental fate. METHODS: Musk tibetene dissolved (or suspended) in water and/or acetonitrile/water mixtures was irradiated at different times by UV-light and by solar light. The irradiation mixtures were analyzed by NMR and TLC. The photoproducts formed were identified by GC-MS and NMR data. RESULTS: The experimental results indicated that musk tibetene was photodegradable in water or acetonitrile/water mixtures with half-life reaction times close to 20 minutes. The irradiation mixtures were separated by chromatographic techniques yielding three photoproducts (3,3,5,6,7-pentamethyl-4-nitro-3H-indole, 3,3,5,6,7-pentamethyl-4-nitro-1H-indoline and 3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone) identified by means of spectroscopic analysis. DISCUSSION: The numerical modelling of the photodegradation concentration-time profiles gave (8.13 +/- 0.15) x 10(-2) and (1.34 +/- 0.04) x 10(-2) mol/E for the overall primary quantum yield of direct photolysis for musk tibetene and the major intermediate (3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone), respectively, in the wavelength range 305-366 nm. The half-life times of photodegradation of the both substances varied from 1-1.5 hours at 20 degrees N during the summer season to 6-10 hours for highest latitudes in winter. CONCLUSIONS: Under solar light, musk tibetene was photolabile in acetonitrile and acetonitrile/water 1/1, while it was slowly degraded when suspended in water. In all media, musk tibetene was photodegraded into three photoproducts. By using a kinetic model, the overall primary quantum yields of direct photolysis of musk tibetene and its main photoproduct, in the wavelength range 305-366 nm, were estimated, indicating that the photodegradation rate for musk tibetene is faster than the photolysis rate of the major by-product. RECOMMENDATIONS AND PERSPECTIVES: The results indicate that, in order to assess the environmental impact of musk tibetene on the aquatic ecosystem, great attention should be focused on the major photoproduct which is proved to be more persistent than the parent compound under light irradiation. The predicted half-life times of direct photolysis for both substances ranged from 1-1.5 hours at 20 degrees N during the summer season to about 6-10 hours for highest latitudes in winter, indicating that, from a photochemical point of view, the environmental persistence of these substances increases by increasing the latitudes and during the cold seasons, making more realistic an intake of these xenobiotic molecules into the food chain of aquatic living organisms. Tanabe reports in his Editorial (Tanabe 2005) that "It is necessary to have knowledge of the global picture of synthetic musk pathways. So, it is conceivable that now is the time to study the transport, persistency, distribution, bioaccumulation and toxic potential of this new environmental menace on a global scale, especially in developing countries". Therefore, the future environmental analysis and investigations on the eco-toxicity of nitro musk compounds should take into account not only the presence of the parent compounds but also their photochemical intermediates or end-by-products.     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.     

Competition between phenanthrene, chrysene, and 2,5-dichlorobiphenyl for high-energy adsorption sites in a sediment

We determined the maximum amounts of added phenanthrene, chrysene, and 2,5-dichlorobiphenyl sorbed onto high-energy adsorption sites in a sediment on bi-solute experiments. The bi-solute pairs were phenanthrene/chrysene and phenanthrene/2,5-dichlorobiphenyl. On the bi-solute sorption experiments, one solute was introduced and equilibrated with sediment prior to addition of the second solute. The values for the maximum amounts adsorbed onto high-energy sites revealed that, after equilibration of the first solute, still some high-energy sites could be occupied by the second solute. Phenanthrene, chrysene, and 2,5-dichlorobiphenyl seem to share about 30% of the accessible high-energy adsorption sites in the sediment employed.     

Desorption of arsenic from drinking water distribution system solids

Previous work has shown that arsenic can accumulate in drinking water distribution system (DWDS) solids (Lytle et~al., 2004) when arsenic is present in the water. The release of arsenic back into the water through particulate transport and/or chemical release (e.g. desorption, dissolution) could result in elevated arsenic levels at the consumers' tap. The primary objective of this work was to examine the impact of pH and orthophosphate on the chemical release (i.e. desorption) of arsenic from nine DWDS solids collected from utilities located in the Midwest. Arsenic release comparisons were based on the examination of arsenic and other water quality parameters in leach water after contact with the solids over the course of 168~hours. Results showed that arsenic was released from solids and suggested that arsenic release was a result of desorption rather than dissolution. Arsenic release generally increased with increasing initial arsenic concentration in the solid and increasing pH levels (in the test range of 7 to 9). Finally, orthophosphate (3 and 5 mg PO₄/L) increased arsenic release at all pH values examined. Based on the study results, utilities with measurable levels of arsenic present in their water should be aware that some water quality changes can cause arsenic release in the DWDS potentially resulting in elevated levels at the consumer's tap.     

土壤中4-溴苯胺降解动力学及其生态毒性追踪

秀谷隆是一种被广泛应用的取代脲类除草剂,其主要降解产物为４－溴苯胺（４－ＢＡ）,研究４－溴苯胺在不同土壤中的降解动力学规律,并用土壤环境指示动物弹尾目跳虫Ｃｏｌｌｅｍｂｏｌａ（Ｆｏｌｓｏｍｉａ ｃａｎｄｉｄａ）跟踪指示该化合物在进一步降解过程中的毒性,结果表明：４－溴苯胺在土壤中的降解行为可用一级反应动力学方程来较好地描述,其生态毒性明显高于母体化合物秀谷隆,该化合物在粘土中的残留量低于砂土,但毒     

Adsorption studies on coir pith for heavy metal removal

Biosorption efficiency of coir pith, a waste product from coir industry, was investigated in this study for the removal of metallic pollutants such as Ni, Cu and Zn from aqueous solutions. The disposal of coir pith is a major problem associated with the coir industries, especially working in the small-scale sector. The present study explores the effectiveness of utilization of coir pith, an accumulating waste, as a biosorbent for heavy metal removal. Batch mode studies were done to evaluate the efficiency of removal of metals under varying adsorption conditions of pH, metal concentration and contact time. Characterization studies of the biosorbent and SEM analysis were done. Kinetic modelling studies were tried using Lagergren pseudo-first-order and second-order models. Equilibrium studies were done using well-known Freundlich, Langmuir and D–R isotherm models. It was found that all isotherms are fitting well indicating the efficiency of coir pith as an adsorbent of heavy metals. The applicability of all the three isotherms to the sorption processes shows that both monolayer adsorption and heterogeneous energetic distribution of active sites on the surface of the adsorbent are possible. Due to the abundance and low cost of these materials, adsorption technologies developed can act as good sustainable options for the future in heavy metal removal from industrial effluents.     

羟基磷灰石的制备及其对水中氟离子的吸附

本研究利用红外光谱(FTIR)、扫描电镜(SEM)和X射线粉末衍射(XRD)观察了共沉淀法合成羟基磷灰石(HAP)的形貌及其晶型结构,并探讨了Ca/P摩尔比、反应时间及反应温度等因素对羟基磷灰石吸附水中氟离子性能的影响。结果表明,n(Ca/P)=1.5/1、反应时间1 h、反应温度40℃、陈化时间48 h、煅烧温度200℃、煅烧时间2 h时,HAP除氟效果最佳,吸附效率和吸附容量分别达到68.8%和6.88 mg/g。实验数据Langmuir等温模式拟合效果优于Freundlich模式,热力学参数计算可知,HAP对氟离子的吸附是自发(ΔG00),吸热(ΔH00),熵增(ΔS00)的过程。HAP对氟离子的吸附符合拟二级反应动力学过程。     

纳米铁催化分解高氯酸盐废水的反应动力学

通过实验考察了酸性条件下纳米铁催化分解高氯酸盐过程中的影响因素,对其分解的动力学进行了研究,并对纳米铁催化剂结构及微观形貌进行SEM、EDS和XRD表征分析。利用阿仑尼乌斯方程和幂指数方程拟合反应动力学方程,获得了高氯酸盐分解动力学方程Ct=C0exp{-0.03773exp(-201.65/T)[H]0.191t},理论的计算值与实验值吻合较好,误差在15%以内。     

改性粉煤灰合成沸石对甲基橙的吸附动力学

以粉煤灰(FA)为原料,采用水热晶化一步法制备了Na P1型沸石(ZFA),对合成产物的结构进行了表征,并采用阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对其进行改性。通过静态吸附实验,研究了改性后Na P1型沸石(MZFA)对水溶液中甲基橙的吸附特性,从动力学角度探讨了吸附机理。结果表明,在所研究的浓度条件下,改性Na P1型沸石对甲基橙的吸附符合Langmuir等温吸附方程,在25℃时,静态饱和吸附量(Qm)为64.76 mg/g。动力学分析表明,改性Na P1型沸石对溶液中甲基橙的吸附符合准二级动力学模型。