Disinfection byproduct formation from algal organic matters after ozonation or ozone combined with activated carbon treatment with subsequent chlorination

Algal organic matter (AOM), including extracellular organic matter (EOM) and intracellular organic matter (IOM) from algal blooms, is widely accepted as essential precursors of disinfection byproducts (DBPs). This study evaluated the effect of ozonation or ozone combined with activated carbon (O₃-AC) treatment on characteristic alternation and DBP formation with subsequent chlorination of Chlorella sp.. The effects of pH and bromide concentration on DBP formation by ozonation or O₃-AC treatment were also investigated. Results showed that the potential formation of DBPs might be attributed to ozonation, but these DBP precursors could be further removed by activated carbon (AC) treatment. Moreover, the formation of target DBPs was controlled at acidic pH by alleviating the reactions between chlorine and AOM. Besides, the bromide substitution factor (BSF) value of trihalomethanes (THMs) from EOM and IOM remained constant after AC treatment. However, THM precursors could be significantly decreased by AC treatment. The above results indicated that O₃-AC was a feasible treatment method for algal-impacted water.     

土壤铵氮在热活化过硫酸盐氧化过程中的转化

采用来自江苏和河北, 具有不同土壤有机质含量和NH₄⁺浓度的土壤样本, 系统地研究了NH₄⁺在热活化过硫酸盐(PS)氧化过程中的转化和归趋, 考察了反应时间、PS浓度和外加NH₄⁺对硝基副产物生成的影响.结果表明, 土壤中的NH₄⁺能够转化成3-硝基酚、4-硝基酚、2-羟基-5-硝基苯甲酸、4-羟基-3-硝基苯甲酸、2, 4-二硝基酚等副产物, 它们的生成量随着反应的进行先增加后降低.增大PS浓度可促进硝基副产物的生成.当PS浓度为30mmol/kg, 反应12h后一硝基酚和一硝基羟基苯甲酸的生成量达到最大.然而随着PS浓度进一步增大, 硝基副产物发生降解.硫酸根自由基(SO₄·^-)在硝化过程中起到了关键作用, 它能将NH₄⁺氧化生成氨基自由基(·NH₂), 随后经过一系列自由基链式反应生成二氧化氮自由基(NO₂·).同时, SO₄·^-进攻土壤有机质中的酚结构单元, 使其氧化生成苯氧自由基, 苯氧自由基进一步与NO₂·结合生成硝基副产物.天然有机质(NOM)在环境中无处不在, NH₄⁺在环境中也普遍存在, PS用于土壤和地下水污染修复时生成硝基副产物很可能是一个普遍现象.     

Disinfection byproducts in chlorinated or brominated swimming pools and spas: Role of brominated DBPs and association with mutagenicity

Although the health benefits of swimming are well-documented, health effects such as asthma and bladder cancer are linked to disinfection by-products (DBPs) in pool water. DBPs are formed from the reaction of disinfectants such as chlorine (Cl) or bromine (Br) with organics in the water. Our previous study (Daiber et al., Environ. Sci. Technol. 50, 6652; 2016) found correlations between the concentrations of classes of DBPs and the mutagenic potencies of waters from chlorinated or brominated swimming pools and spas. We extended this study by identifying significantly different concentrations of 21 individual DBPs in brominated or chlorinated pool and spa waters as well as identifying which DBPs and additional DBP classes were most associated with the mutagenicity of these waters. Using data from our previous study, we found that among 21 DBPs analyzed in 21 pool and spa waters, the concentration of bromoacetic acid was significantly higher in Br-waters versus Cl-waters, whereas the concentration of trichloroacetic acid was significantly higher in Cl-waters. Five Br-DBPs (tribromomethane, dibromochloroacetic acid, dibromoacetonitrile, bromoacetic acid, and tribromoacetic acid) had significantly higher concentrations in Br-spa versus Cl-spa waters. Cl-pools had significantly higher concentrations of Cl-DBPs (trichloroacetaldehyde, trichloromethane, dichloroacetic acid, and chloroacetic acid), whereas Br-pools had significantly higher concentrations of Br-DBPs (tribromomethane, dibromoacetic acid, dibromoacetonitrile, and tribromoacetic acid). The concentrations of the sum of all 4 trihalomethanes, all 11 Br-DBPs, and all 5 nitrogen-containing DBPs were each significantly higher in brominated than in chlorinated pools and spas. The 8 Br-DBPs were the only DBPs whose individual concentrations were significantly correlated with the mutagenic potencies of the pool and spa waters. These results, along with those from our earlier study, highlight the importance of Br-DBPs in the mutagenicity of these recreational waters.     

Formation of regulated and unregulated disinfection byproducts during chlorination and chloramination: Roles of dissolved organic matter type, bromide, and iodide

Algal blooms and wastewater effluents can introduce algal organic matter (AOM) and effluent organic matter (EfOM) into surface waters, respectively. In this study, the impact of bromide and iodide on the formation of halogenated disinfection byproducts (DBPs) during chlorination and chloramination from various types of dissolved organic matter (DOM, e.g., natural organic matter (NOM), AOM, and EfOM) were investigated based on the data collected from literature. In general, higher formation of trihalomethanes (THMs) and haloacetic acids (HAAs) was observed in NOM than AOM and EfOM, indicating high reactivities of phenolic moieties with both chlorine and monochloramine. The formation of haloacetaldehydes (HALs), haloacetonitriles (HANs) and haloacetamides (HAMs) was much lower than THMs and HAAs. Increasing initial bromide concentrations increased the formation of THMs, HAAs, HANs, and HAMs, but not HALs. Bromine substitution factor (BSF) values of DBPs formed in chlorination decreased as specific ultraviolet absorbance (SUVA) increased. AOM favored the formation of iodinated THMs (I-THMs) during chloramination using preformed chloramines and chlorination-chloramination processes. Increasing prechlorination time can reduce the I-THM concentrations because of the conversion of iodide to iodate, but this increased the formation of chlorinated and brominated DBPs. In an analogous way, iodine substitution factor (ISF) values of I-THMs formed in chloramination decreased as SUVA values of DOM increased. Compared to chlorination, the formation of noniodinated DBPs is low in chloramination.     

Micropollutant removal and disinfection byproduct control by sequential peroxymonosulfate-UV treatment in water: A case study with sulfamethoxazole

UV/peroxymonosulfate (UV/PMS) advanced oxidation process has attracted significant attention for removal of micropollutants in water. However, during practical water treatment applications, the PMS treatment must be performed before the UV treatment to achieve full contact. In this study, sulfamethoxazole (SMX) was selected as the target micropollutant. Four different operational approaches, including UV alone, PMS alone, simultaneous UV/PMS and sequential PMS-UV, were compared for their differences in SMX removal and disinfection by-product (DBP) formation potentials during chlorine-driven disinfection. Among the four approaches, UV/PMS and PMS-UV achieved over 90% removal efficiencies for SMX without substantial differences. For raw water, the trichloronitromethane (TCNM) formation potential after treatment with PMS-UV was lower than that after UV/PMS treatment. The time interval over which the PMS-UV process was conducted had little effect on the final removal efficiency for SMX. However, a brief (5 min) pre-PMS treatment significantly reduced the TCNM formation potential and the genotoxicity from DBPs. The formation risk for TCNM during chlorination increased markedly with increasing PMS dosages, and the appropriate dosage under these experimental conditions was suggested to be 0.5–1.0 mmol/L. Under alkaline conditions, PMS-UV treatment can enhance SMX degradation as well as dramatically reduced the formation potentials for haloketones, haloacetonitriles and halonitromethanes. This study suggests that proper optimization of UV/PMS processes can remove SMX and reduce its DBP formation.     

Enhanced removal of organic matter and typical disinfection byproduct precursors in combined iron–carbon micro electrolysis-UBAF process for drinking water pre-treatment

The organic matter and two types of disinfection byproduct(DBP) precursors in micropolluted source water were removed using an iron–carbon micro-electrolysis(ICME)combined with up-flow biological aerated filter(UBAF) process. Two pilot-scale experiments(ICME-UBAF and UBAF alone) were used to investigate the effect of the ICME system on the removal of organic matter and DBP precursors. The results showed that ICME pretreatment removed 15.6% of dissolved organic matter(DOM)and significantly improved the removal rate in the subsequent UBAF process. The ICME system removed 31% of trichloromethane(TCM) precursors and 20% of dichloroacetonitrile(DCAN) precursors. The results of measurements of the molecular weight distribution and hydrophilic fractions of DOM and DBP precursors showed that ICME pretreatment played a key role in breaking large-molecular-weight organic matter into low-molecular-weight components, and the hydrophobic fraction into hydrophilic compounds, which was favorable for subsequent biodegradation by UBAF.Three-dimensional fluorescence spectroscopy(3D-EEM) further indicated that the ICME system improved the removal of TCM and DCAN precursors. The biomass analysis indicated the presence of a larger and more diverse microbial community in the ICME-UBAF system than for the UBAF alone. The high-throughput sequencing results revealed that domination of the genera Sphingomonas, Brevundimonas and Sphingorhabdus contributed to the better removal of organic matter and two types of DBP precursors. Also, Nitrosomonas and Pseudomonas were beneficial for ammonia removal.     

Impact of combining chlorine dioxide and chlorine on DBP formation in simulated indoor swimming pools

The main objective of this study was to assess the combined use of chlorine dioxide (ClO2) and chlorine (Cl2) on the speciation and kinetics of disinfection by-product (DBP) formation in swimming pools using synthetic pool waters prepared with a body fluid analog (BFA) and/or fresh natural water. At 1:25 (mass ratio) of ClO2 to Cl2, there was no significant reduction in the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) for both BFA solution and natural water compared to the application of Cl2 alone. When the mass ratio of ClO2 to Cl2 increased to 1:1, substantial decreases in both THMs and HAAs were observed in the natural water, while there was almost no change of DBP formations in the BFA solution. Haloacetonitriles and halonitromethanes levels in both water matrices remained similar. In the presence of bromide, the overall DBP formation increased in both BFA solution and natural water. For the DBP formation kinetics, after 72 hr of contact time, very low formation of THMs and HAAs was observed for the use of ClO2 only. Compared to Cl2 control, however, applying the 1:1 mixture of ClO2/Cl2 reduced THMs by > 60% and HAAs by > 50%. Chlorite was maintained below 1.0 mg/L, while the formation of chlorate significantly increased over the reaction time. Finally, in a bench-scale indoor pool experiment, applying ClO2 and Cl2 simultaneously produced less THMs compared to Cl2 control and kept chlorite at < 0.4 mg/L, while HAAs and chlorate accumulated over 4-week operation period.     

Biomarkers of end of shift exposure to disinfection byproducts in nurses

Increased disinfectant use commonly takes place in hospitals and other health care settings. A cross-sectional study among active nurses in two Cypriot public hospitals (n = 179) was conducted to examine the prevalence of exposure to disinfection byproducts (DBPs), such as trihalomethanes (THMs) using both self-reported information and biomarker measurements. The objectives of this study were to: i) quantify the magnitude and variability of occupational exposure to disinfectants/DBPs in nurses, ii) generate job exposure matrices (JEM) and job task exposure matrices (JTEM) for disinfectants, and iii) assess the major determinants of urinary THMs in nurses. End of shift urinary total THM values showed high variability among the nurses, but did not differ between hospitals. The disinfectant group of alcohols/phenols was used by > 98% of nurses, followed by octenidine (82%), iodine and chlorine (39%, each), chlorhexidine (25%), formaldehyde (12%), hydrogen peroxide (11%), and peracetic acid/ammonia/quaternary ammonium compounds (QACs), all being < 8% each. Chlorine use during the past 24 hr was associated with significantly (p < 0.05) lower brominated THMs (BrTHMs) after adjusting for age, gender and BMI, while a positive association was shown for TCM and the sum of all THMs (TTHMs), albeit not significant. Nurses were exposed to nearly double the levels of TTHMs and BrTHMs (median and IQR, 1027 [560, 2475] ng/g and 323 [212, 497] ng/g, respectively) when compared to those of the general population (552 [309,989] ng/g and 152 [87,261] ng/g, respectively). This was the first occupational health dataset reporting measurements of biomarkers of end of shift exposures to disinfectants/DBPs.     

Monohalogenated acetamide-induced cellular stress and genotoxicity are related to electrophilic softness and thiol/thiolate reactivity

Haloacetamides(HAMs) are cytotoxic, genotoxic, and mutagenic byproducts of drinking water disinfection. They are soft electrophilic compounds that form covalent bonds with the free thiol/thiolate in cysteine residues through an S_N2 reaction mechanism.Toxicity of the monohalogenated HAMs(iodoacetamide, IAM; bromoacetamide, BAM;or chloroacetamide, CAM) varied depending on the halogen substituent. The aim of this research was to investigate how the halogen atom affects the reactivity and toxicological properties of HAMs, measured as induction of oxidative/electrophilic stress response and genotoxicity. Additionally, we wanted to determine how well in silico estimates of electrophilic softness matched thiol/thiolate reactivity and in vitro toxicological endpoints.Each of the HAMs significantly induced nuclear Rad51 accumulation and ARE signaling activity compared to a negative control. The rank order of effect was IAM BAM CAM for Rad51, and BAM ≈ IAM CAM for ARE. In general, electrophilic softness and in chemico thiol/thiolate reactivity provided a qualitative indicator of toxicity, as the softer electrophiles IAM and BAM were more thiol/thiolate reactive and were more toxic than CAM.     

Showering in Flint, MI: Is there a DBP problem?

Lead contamination in the City of Flint, MI has been well documented over the past two years, with lead levels above the EPA Action Level until summer 2016. This resulted from an ill-fated decision to switch from Detroit water (Lake Huron) with corrosion control, to Flint River water without corrosion control. Although lead levels are now closer to normal, reports of skin rashes have sparked questions surrounding tap water in some Flint homes. This study investigated the presence of contaminants, including disinfection by-products (DBPs), in the hot tap water used for showering in the homes of residents in Flint. Extensive quantitative analysis of 61 regulated and priority unregulated DBPs was conducted in Flint hot and cold tap water, along with the analysis of 50 volatile organic compounds and a nontarget comprehensive, broadscreen analysis, to identify a possible source for the reported skin rashes. For comparison, chlorinated hot and cold waters from three other cities were also sampled, including Detroit, which also uses Lake Huron as its source water. Results showed that hot water samples generally contained elevated levels of regulated and priority unregulated DBPs compared to cold water samples, but trihalomethanes were still within regulatory limits. Overall, hot shower water from Flint was similar to waters sampled from the three other cities and did not have unusually high levels of DBPs or other organic chemicals that could be responsible for the skin rashes observed by residents. It is possible that an inorganic chemical or microbial contaminant may be responsible.