Experimental investigation,intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite

Dry wire electrical discharge machining (WEDM) is an environmentally friendly modification of the oil WEDM process in which liquid dielectric is replaced by a gaseous medium. In the present work, parametric analysis has been fulfilled while dry WEDM of Al–SiC metal matrix composite. Experiments were designed and conducted based on L₂₇ Taguchi's orthogonal array to study the effect of pulse on time, pulse off time, gap voltage, discharge current, wire tension and wire feed on cutting velocity (CV) and surface roughness (SR). Firstly, a series of exploratory experiments has been conducted to identify appropriate gas and wire material based on the values of cutting velocity. After selection of best gas and best wire, they were used for later stage of experiments. Analysis of variances (ANOVA) has been performed to identify significant factors. In order to correlate relationship between process inputs and responses, an adaptive neuro-fuzzy inference system (ANFIS) has been employed to predict the process characteristics based on experimental observation. At the end, an artificial bee colony (ABC) algorithm has been associated with ANFIS models to maximize CV and minimize SR, simultaneously. Then the optimal solutions that obtained through ANFIS-ABC technique have been compared with numbers of confirmatory experiments. Results indicated that oxygen gas and brass wire guarantee superior cutting velocity. Also, according to ANOVA, pulse on time and discharge current were found to have significant effect on CV and SR. In modeling of CV and SR by ANFIS, it was resulted that the proposed method has superiority in prediction of them in the ranges of factors beyond the training condition. Also, association of ANFIS with ABC can find the optimal combination of process parameters accurately according to the confirmatory experiments.     

模拟氮沉降和CO2浓度增加对三江平原小叶章群落土壤总有机碳和氮素含量的影响

利用开顶气室(Open-Top Chamber,OTC),设置当前大气CO2浓度(370μmol.mol-1)、中等CO2浓度(550μmol.mol-1)和高CO2浓度(700μmol.mol-1)3个CO2浓度水平和不施氮(N1,0g N.m-2.a-1)、常氮(N2,5g N.m-2.a-1)、高氮(N3,10g N.m-2.a-1)3个氮素水平。研究了不同N沉降水平下,大气CO2浓度升高对以三江平原小叶章群落土壤有机碳和氮素含量的影响。结果表明:CO2浓度升高结合氮沉降连续运行两个生长季后,湿地土壤总有机碳含量没有显著变化,说明较短时间内大气CO2浓度升高和氮沉降不会使三江平原土壤有机碳含量产生变化。氮沉降引起各个土层的土壤全氮、铵态氮和硝态氮的含量增加,施氮水平越高土壤氮增加越多,但是全氮增加量不明显,铵态氮随施氮量的增加呈现极显著差异水平(P<0.01)。0～10cm,10～20cm土层土壤全氮、铵态氮的含量随着CO2浓度升高呈现出先增大后减小的趋势。土壤硝态氮含量在10～20cm土层含量变化与土壤全氮、铵态氮的变化趋势相同。说明大气CO2浓度一定程度的增加可以增加土壤的氮素含量,但是过量的大气CO2浓度反而会使得土壤氮素含量减少。     

城市排水系统沉积物特性研究

重点阐述了沉积物的来源和组成,沉积物的颗粒粒径、有机物含量(VSS/SS)、颗粒粘性和颗粒密度等物化性质,以及附着于沉积物上的金属污染物的相关特征。其粒度分布范围是D10为1.89～223.21μm,D50为12.38～437.30μm,D90为39.06～1 572.52μm;VSS/SS的范围是1%～38%;密度范围是1.80～2.47 g/cm3。金属污染物主要的附着对象是沉积物中的细小颗粒如生物膜上。以上沉积物性质对于解决排水系统的泥沙淤积问题以及水体污染的控制都具有重要意义。     

维管束植物桂花树叶片对大气氮沉降的吸收研究

本文通过测定维管束植物桂花树叶片的氮含量和氮同位素组成,分析其对大气氮沉降的截留吸收机制。为期一年(2009.03～2010.03)的监测数据显示,桂花树叶片氮含量为1.33%～3.09%,平均值为2.18%;叶片δ15 N为+0.54‰～+3.78‰,均值为+2.29‰。桂花树叶片N%、δ15 N的季节性变化趋势,总体呈现春、冬高,夏、秋低的规律,这与已有的贵阳市雨水监测数据一致。对比不同树冠厚度的叶片样品,发现叶片N%随树冠厚度增加而降低,顶部叶片N%表现为最高(2.39±0.4%),说明桂花树的树冠层对大气氮沉降有明显的截留吸收作用。桂花树顶部叶片δ15 N最偏负,而上覆树冠层最厚的下方叶片的δ15 N最偏正,反映了树冠层在吸收大气氮沉降过程中存在选择性吸收,引起同位素分馏,即树冠层越厚,穿冠水δ15 N越偏正,且分馏程度与树冠厚度成正比,导致下方叶片δ15 N最高。     

采用体积信息熵表征颗粒污泥系统稳定性及其稳定机制

SBR反应器中培养自养硝化颗粒污泥,在絮体转化为颗粒过程中,颗粒的体积信息熵从2.05(27 d,初见颗粒)降低为1.85(95 d),熵值降低的主要动力来自于松散的絮体在较快沉速选择压条件下被淘洗出系统.当絮体被淘洗出系统即完成颗粒化过程,在129 d时测得系统中颗粒沉速分布的中位数为6.27 m.h-1,因此颗粒体积熵值的变化不再受沉速选择压(6m.h-1)的控制.颗粒的粒径、沉速及体积熵值分布均呈现周期性变化,其中信息熵的均值为2.16,最小值为1.79,最大值为2.63.在这种周期性变化过程中,系统总是表现为粒径均值先增大后减小.熵值的波动的驱动力来自于颗粒的破碎与破碎体的成长,体积分布信息熵的大小可以很好地表征系统的稳定性及其稳定机制.     

Soil fertility dynamics in runoff-capture agriculture, Canary Islands, Spain

In the extremely arid (∼150 mm yr⁻¹) eastern Canary Islands of Lanzarote, Fuerteventura and La Graciosa, agriculture has been sustained for decades by a traditional runoff-capture (RC) farming system known as “gavias”. Although the main goal of these systems is to increase water supply for crops, making unnecessary conventional irrigation, a secondary and equally important factor is that this system allows for sustainable agricultural production without addition of chemical or organic fertilizers. A field study was conducted to assess the impact of long-term agriculture (>50 yr) on soil fertility and to evaluate key factors affecting the nutrient sustainability of RC agricultural production. Soil fertility and nutrient dynamics were studied through chemical characterization of the arable layer (0-25 cm) of RC agricultural plots, adjacent natural soils (control) not affected by runoff and cultivation, and sediments contributed by a series of RC events. Results showed that RC soils have enhanced fertility status, particularly because they are less affected by salinity and sodicity (mean electrical conductivity = 1.8 dS m⁻¹ vs. 51.0 dS m⁻¹ in control soils; mean exchangeable sodium percentage = 11.1% vs. 30.6% in control soils), and have higher water and nutrient holding capacities (mean clay plus silt contents ≈87% vs. 69% in control soils). In general, sediments transported with the runoff and deposited in RC plots (average sediment yield ≈ 46 ton ha⁻¹ yr⁻¹), contain sufficient nutrients to prevent a progressive reduction of essential plant nutrients below natural levels in spite of nutrient uptake and removal by the harvested crop. Average additions of nitrogen, phosphorus and potassium with the runoff sediments were 33.6, 35.3 and 48.8 kg ha⁻¹ yr⁻¹, respectively. Results of this study show how a crop production system can be sustained in the long term by natural hydrological and biogeochemical catchment processes. This system maintains a nutrient balance that is not based on energy-intensive inputs of fertilizers, but is integrated in natural nutrient cycling processes, unlike other tropical farming agroecosystems.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

有关斜管沉淀池的上升流速讨论

文章从理论上了分析斜管沉淀池上升流速对沉淀池处理效果的影响,及原水特性与斜管沉淀池上升流速取值的关系。讨论分析斜管沉淀池设计时,应根据原水特性不同选择不同的斜管沉淀池上升流速。     

石羊河流域1959年至2008年风速变化特征分析

利用线性拟合、Mann—Kendall方法、小波分析对石羊河流域五个测站空间平均的近50年来的逐日风速资料进行了倾向、周期、突变等特性分析。研究结果表明：1959年至2008年间,整个石羊河流域风速呈减小趋势,变化率约为-0．004m／（s．a）．而上游风速呈现明显的上升趋势。四个季节中冬季风速降低速度最大,而夏季风速呈现上升趋势。风速的长期变化还具有一定的突变性,年平均风速在1988年出现了由高到低的突变,表明风速开始下降。复值Morlet小波分析的结果显示,风速变化存在6a、13a、19a、25a四个峰值。其中19a的时间尺度为第一主周期。     

聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.