A case study on project-level CO2 mitigation costs in industrialised countries: the Climate Cent Foundation in Switzerland

This paper analyses CO₂ emissions reduction costs based on project data from the Climate Cent Foundation (CCF), a climate policy instrument in Switzerland. Four conclusions are drawn. First, for the projects investigated, the CCF on average pays €63/ton. Due to the Kyoto Protocol, the CCF buys reductions only until 2012. This cut-off increases reported per ton reduction costs, as the additional lifetime project costs are set in relation to reductions only until 2012, rather than to reductions realised over the whole lifetime. Lifetime reduction costs are €45/t. Second, correlation between CCF's payments and lifetime reduction costs per ton is low. Projects with low per ton reduction costs should thus be identified based on lifetime per ton reduction costs. Third, the wide range of project costs per ton observed casts doubts on the widely used identification of the merit order of reduction measures based on average per ton costs for technology types. Finally, the CCF covers only a fraction of additional reduction costs. Decisions to take reduction efforts thus depend on additional, non-observable and/or non-economic motives. Any generalisation of results has to consider that this analysis is based on prospective costs of a sub-sample of projects in Switzerland.     

Some aspects in testing and assessment of metal dust explosions

The dust explosion committee of the Association of Powder Process Industry and Engineering, Japan recently established two testing standards for dust explosions. In the investigations for the standardization, many experimental data have been obtained for the dusts currently used in Japanese industries. Data for zirconium, tantalum and silicone dusts are presented to discuss the use of test methods, which have been accepted internationally. The test methods for dust explosions have to consider a variety of kinds and forms of dusts to be tested.     

Temperature profile across the combustion zone propagating through an iron particle cloud

Knowledge of the mechanism of combustion zone propagation during dust explosion is of great importance to prevent damage caused by accidental dust explosions. In this study, the temperature profile across the combustion zone propagating through an iron particle cloud is measured experimentally by a thermocouple to elucidate the propagation mechanism. The measured temperature starts to increase slowly at a position about 5 mm ahead of the leading edge of the combustion zone, increases quickly at a position about 3 mm ahead of the leading edge, reaches a maximum value near the end of the combustion zone, and then decreases. As the iron particle concentration increases, the maximum temperature increases at lower concentration, takes a maximum value, and then decreases at higher concentration. The relation between the propagation velocity of the combustion zone and the maximum temperature is also examined. It is found that the propagation velocity has a linear relationship with the maximum temperature. This result suggests that the conductive heat transfer is dominant in the propagation process of the combustion zone through an iron particle cloud.     

Evidence of aircraft activity impact on local air quality: A study in the context of uncommon airport operation

Wuhan Tianhe International Airport (WUH) was suspended to contain the spread of COVID-19, while Shanghai Hongqiao International Airport (SHA) saw a tremendous flight reduction. Closure of a major international airport is extremely rare and thus represents a unique opportunity to straightforwardly observe the impact of airport emissions on local air quality. In this study, a series of statistical tools were applied to analyze the variations in air pollutant levels in the vicinity of WUH and SHA. The results of bivariate polar plots show that airport SHA and WUH are a major source of nitrogen oxides. NO_x, NO₂ and NO diminished by 55.8%, 44.1%, 76.9%, and 40.4%, 33.3% and 59.4% during the COVID-19 lockdown compared to those in the same period of 2018 and 2019, under a reduction in aircraft activities by 58.6% and 61.4%. The concentration of NO₂, SO₂ and PM_2.5 decreased by 77.3%, 8.2%, 29.5%, right after the closure of airport WUH on 23 January 2020. The average concentrations of NO, NO₂ and NO_x scatter plots at downwind of SHA after the lockdown were 78.0%, 47.9%, 57.4% and 62.3%, 34.8%, 41.8% lower than those during the same period in 2018 and 2019. However, a significant increase in O₃ levels by 50.0% and 25.9% at WUH and SHA was observed, respectively. These results evidently show decreased nitrogen oxides concentrations in the airport vicinity due to reduced aircraft activities, while amplified O₃ pollution due to a lower titration by NO under strong reduction in NO_x emissions.     

巴黎协定下中国碳排放权省域分配及减排潜力评估研究

通过构建碳排放权区域分配模型完成了省域分配,在此基础上与当前各地实际碳排放量进行比对,明晰了各自初始空间余额;而后对碳排放权欠缺地区的碳减排潜力进行了综合评估。研究结果表明：（1）我国30个省区碳排放权分配存在较大差异,其中云南配额最高,占比高达10.53%;宁夏配额最少,占比仅为0.28%。（2）全国有14个省区碳排放权初始空间余额表现出盈余状态,根据成因差异可大致分为“低排放、高配额”“低排放、低配额”以及“高排放、高配额”等三种类型;其他16个地区均表现出一定程度的欠缺,结合数值差异可划分为以江苏等4地为代表的轻度欠缺地区,以天津等7地为代表的中度欠缺地区,以及以辽宁等5地为代表的重度欠缺地区。（3）浙江、天津、山东等3地目前所具备的碳减排潜力要明显高于其他地区,而各地区的碳减排潜力水平虽与其碳排放权欠缺量表现出了一定趋同性但并非完全一致。     

Economic Growth,Climate Change,Biodiversity Loss: Distributive Justice for the Global North and South

Abstract: Economic growth‐the increase in production and consumption of goods and services‐must be considered within its biophysical context. Economic growth is fueled by biophysical inputs and its outputs degrade ecological processes, such as the global climate system. Economic growth is currently the principal cause of increased climate change, and climate change is a primary mechanism of biodiversity loss. Therefore, economic growth is a prime catalyst of biodiversity loss. Because people desire economic growth for dissimilar reasons‐some for the increased accumulation of wealth, others for basic needs‐how we limit economic growth becomes an ethical problem. Principles of distributive justice can help construct an international climate‐change regime based on principles of equity. An equity‐based framework that caps economic growth in the most polluting economies will lessen human impact on biodiversity. When coupled with a cap‐and‐trade mechanism, the framework can also provide a powerful tool for redistribution of wealth. Such an equity‐based framework promises to be more inclusive and therefore more effective because it accounts for the disparate developmental conditions of the global north and south.     

Modelling of dust lifting process behind propagating shock wave

Dust dispersion from a layer is a complicated problem, which has not been completely solved yet, especially if an Eulerian–Eulerian approach has to be used to model the two-phase dusty flow. In previous investigation, a phenomenological model of the dust dispersion process from a layer was developed, but the evaluation of the model revealed some weaknesses. In the current paper, the model of the dust dispersion process was presented and three improvements of the model were studied: Saffman force, Magnus force and particles collisions. The implementation of Magnus and Saffman forces into the code did not improve the numerical results and it was shown that it had very little influence on the dust lifting process, in case the phenomenological model of the layer is used. Some explanations were proposed in the paper. Besides, an empirical model of particles collisions was also added to the code and its influence on the results was studied. It was shown that the particles collisions model improved the obtained results, but further modifications are to be studied in the future.     

新疆阿拉尔垦区大气降尘中重金属时空分布特征

连续12个月对新疆阿拉尔垦区9个样点的3个不同高度处所采集的大气降尘中的重金属含量进行分析,结果表明:所测大气降尘中的5种重金属元素以铁的含量最高,铬的含量最低,其中铜、铁、锰及锌的含量均在4月份达到最大值,并且与降尘量之间有较好的线性关系。在不同的空间范围内,大气降尘中的重金属含量存在显著差异,其中铜、铁、锰的含量均随着高度的上升而呈现递增的趋势;铬的含量随高度的递增呈现递减趋势。     

Towards an inherently safer bioprocessing industry: A review

The bioprocessing industry is regarded as one of the fastest growing sectors with an estimated compound annual growth rate of 8.6%. The global market for biopharmaceuticals is projected to rise to a market value of USD 727.1 billion by 2025. Due to the unique nature of bioprocessing industries wherein micro-organisms are employed to manufacture the desired products, these processes are prone to additional hazards such as biological hazards and dust explosion amongst others. This necessitates the need to review the existing research in the fields of biotechnology and bioprocessing to reduce/eliminate these hazards and pave the path towards a safer bioprocessing industry. The study involves developing a framework comprising of studying the recent technologies that reduce/eliminate these hazards involved in the bioprocessing industries that include dust explosions, loss of containment of toxic chemicals, loss of containment of biohazard/active product ingredient, fire, and explosion and mapping these technologies with respect to inherent safety principles that include substitution, minimization, moderation and simplification with an overall objective of minimizing the risk associated with bioprocesses and moving towards an inherently safer bioprocessing industry.