Methane fluxes from artificial wetlands: A global appraisal

Methane emissions make an important contribution to the enhanced greenhouse effect, emissions from rice growing being one of its major anthropogenic sources. The estimation of global fluxes of methane from rice and from coarse fiber production depends on extrapolating observed data across countries and agroclimatic zones: the estimates are therefore imprecise. We present a revised estimate of global emissions of 96 Tg CH₄/yr, given 1991 rice areas, and 1991 production data for those tropical coarse fibers that also produce methane under anaerobic conditions. This is higher than many previous studies, which systematically underestimated the fluxes from tropical countries. As the world's population increases, the demand for rice will rise. This demand can only be satisfied through greater rice production, either by bringing new areas into rice growing or by using the present area more intensively. Strategies based on improved water management and fertilizer use will allow increased rice production and yields and reduce the methane flux per unit or rice production.     

Acid-forming emissions in Alberta,Canada

The sulphur dioxide and nitrogen oxides emissions from all sources in Alberta, Canada, during 1982 amounted to 488,297 and 353,511 tonnes, respectively. During this year deposition of wet sulphate from all stations in the province, 8 kg ha^–1 yr^–1, compares well with the five-year average (1978–1982) value of 10 kg ha^–1 yr^–1. These measurements are about one-half of the wet sulphate deposition criteria of 20 kg ha^–1 yr^–1 established for protecting the moderately sensitive aquatic ecosystem in eastern Canada. Due to dry, cold, continental climate conditions of Alberta, dry sulphate or sulphur deposition is equally or more important than wet deposition. No effects of the long-range transport of atmospheric pollutants (LRTAP) on the ecosystems in Alberta have been observed to date. Atmospheric deposition target loadings of SO₄ ^–2, NO₃ ^–, and H⁺ for Alberta and western Canadian environmental conditions should be developed to protect the highly sensitive ecosystems. Some future research and monitoring priorities for Alberta and western Canada are outlined.     

Monitoring the results of Canada/U.S.A acid rain control programs: some lake responses

Aquatic acidification by deposition of airborne pollutants emerged as an environmental issue in southeastern Canada during the 1970s. Drawing information from the extensive research and monitoring programs, a sequence of issue assessments demonstrated the necessity of reducing the anthropogenic emissions of acidifying pollutants, particularly sulphur dioxide (SO₂). The 1991 Canada-U.S. Air Quality Agreement (AQA) was negotiated to reduce North American SO₂ emissions by 40% relative to 1980 levels by 2010, and at present, both countries have reduced emissions beyond their AQA commitment. In response to reduced SO₂ emissions, atmospheric deposition of sulphate (SO₄ ^2–) and SO₄ ^2– concentrations in many lakes have declined, particularly in south-central Ontario and southern Québec. Sulphate deposition still exceeds aquatic critical loads throughout southeastern Canada however. Increasing pH or alkalinity (commonly deemed recovery) has been observed in only some lakes. Several biogeochemical factors have intervened to modify the lake chemistry response to reduced SO₄ ^2– input, notably release of stored SO₄ ^2– from wetlands following periods of drought and reduction in the export of base cations from terrestrial soils. Three examples from Ontario are presented to illustrate these responses. Significant increases in pH and alkalinity have been observed in many lakes in the Sudbury area of Ontario due to the large reductions in local SO₂ emissions; early-stage biological recovery is evident in these lakes. An integrated assessment model predicts that AQA emission reductions will not be sufficient to promote widespread chemical or biological recovery of Canadian lakes. Monitoring and modeling are mutually supporting assessment activities and both must continue.     

A Three-Dimensional Model Study of the Impact of AVOC and BVOC Emissions on Ozone in an Urban Area of the Eastern Spain

This study concentrated on the effects of Biogenic Volatile Organic Compounds (BVOC) emissions on ozone (O₃) in an area of the Eastern Spain on June 12, 1997, a day characterised by sea breeze. Simulation of meteorology was performed with the three-dimensional model ADREA-I. Comparisons of the model results with observations have revealed overall a good agreement in temperature and wind velocity. Two runs were performed with UAM-IV for the photochemical calculations. The first simulated the effects of the anthropogenic emissions only (run A) and the second the combined effects of anthropogenic and biogenic emissions, (run B). Comparisons of the model O₃ concentrations with measurements showed a general agreement with the experimental data. Discrepancies between the calculated results and the observations during the early morning hours could be attributed to inaccuracies in nitrogen oxides (NO_x) from the anthropogenic emissions inventory. Comparisons between runs A and B yielded differences up to 30% in the morning, over inland areas. It was deduced that the inclusion of BVOC in total emissions could result in an increase or decrease of tropospheric O₃, depending on the available amounts of anthropogenic emissions.     

皂化废水的资源化治理技术

采用预处理后与锅炉烟气联合治理，废水循环回用的工艺治理高浓度碱性皂化废水，使皂化废水作为一项资源得到了充分的利用，取得了较好的环境和经济效益。     

N2O emissions from agricultural soils in the North China Plain:the effect of chemical nitrogen fertilizer and organic manure

ＩｎｔｒｏｄｕｃｔｉｏｎＮｉｔｒｏｕｓｏｘｉｄｅ (Ｎ2 Ｏ)ｉｓａｖｅｒｙｉｍｐｏｒｔａｎｔｇｒｅｅｎｈｏｕｓｅｇａｓｉｎｔｈｅａｔｍｏｓｐｈｅｒｅ.ＩｎｔｅｒｅｓｔｉｎｔｈｅｉｎｃｒｅａｓｅｏｆａｔｍｏｓｐｈｅｒｉｃＮ2 ＯｈａｓｂｅｅｎｒｅｃｅｎｔｌｙｓｔｉｍｕｌａｔｅｄｂｙｔｈｅｕｎｄｅｒｓｔａｎｄｉｎｇｔｈａｔＮ2 Ｏｇａｓｐｌａｙｓａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｈｅｃｈｅｍｉｓｔｒｙａｎｄｏｚｏｎｅｌａｙｅｒｄｅｓｔｒｕｃｔｉｏｎｏｆｔｈｅｓｔｒａｔｏｓｐｈｅｒｅ.Ｔｈｅｒａｄｉａｔｉｖ…     

Current status and expected future trends in dust explosion research

In spite of extensive research and development for more than 100 years to prevent and mitigate dust explosions in the process industries, this hazard continues to threaten industries that manufacture, use and/or handle powders and dusts of combustible materials. Lack of methods for predicting real dust cloud structures and flame propagation processes has been a major obstacle to prediction of course and consequences of dust explosions in practice. However, work at developing comprehensive numerical simulation models for solving these problems is now on its way. This requires detailed experimental and theoretical studies of the physics and chemistry of dust cloud generation and combustion. The present paper discusses how this kind of work will promote the development of means for prevention and mitigation of dust explosions in practice. However, progress in other areas will also be discussed, e.g. ignition prevention. The importance of using inherently safe process design, building on knowledge in powder science and technology, and of systematic education/training of personnel, is also emphasized.     

A Sensitivity Analysis of Ozone Formation to Ambient Air Composition by Means of Photochemical Models

The prediction of the atmospheric concentration of ozoneand of other photochemical pollutants represents one of themajor scientific challenges in the study of urban airquality. To this aim, photochemical models are widelyapplied as support tools for regulatory purposes, but theirresults are known to be affected by several uncertainties,in boundary conditions, geographical and meteorologicaldata and the chemical composition of emission and ambientair as well. Also the mechanism selected to describe theurban chemistry may lead to large differences in the modelresults. In this work, the influence of ambient air composition onthe results of photochemical model has been studied using a simple Lagrangian trajectory model coupled with different chemical sub-models (CB-IV and a simplified version of EMEP). To this aim a parametric sensitivity study of ozone with respect to its precursors' concentration was performed withreference to the same meteorological conditions and by simulatingdifferent scenarios characterized by specific emitted pollutantsconcentration. Rather than analyzing sensitivity by changing initial composition, an analytical local sensitivity concept has been applied; this allowed evaluation the influence of initial concentration on the predicted ozone concentration andto discriminate between VOC-sensitive and NOx-sensitive kineticregimes. Finally, these results have been successfully comparedwith those obtained applying the concept of photochemical indicators (i.e. O₃/NOy and H₂O₂/HNO₃ ratios).     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

Carbon storage potential in natural fiber composites

The environmental performance of hemp based natural fiber mat thermoplastic (NMT) has been evaluated in this study by quantifying carbon storage potential and CO₂ emissions and comparing the results with commercially available glass fiber composites. Non-woven mats of hemp fiber and polypropylene matrix were used to make NMT samples by film-stacking method without using any binder aid. The results showed that hemp based NMT have compatible or even better strength properties as compared to conventional flax based thermoplastics. A value of 63 MPa for flexural strength is achieved at 64% fiber content by weight. Similarly, impact energy values (84–154 J/m) are also promising. The carbon sequestration and storage by hemp crop through photosynthesis is estimated by quantifying dry biomass of fibers based on one metric ton of NMT. A value of 325 kg carbon per metric ton of hemp based composite is estimated which can be stored by the product during its useful life. An extra 22% carbon storage can be achieved by increasing the compression ratio by 13% while maintaining same flexural strength. Further, net carbon sequestration by industrial hemp crop is estimated as 0.67 ton/h/year, which is compatible to all USA urban trees and very close to naturally, regenerated forests. A comparative life cycle analysis focused on non-renewable energy consumption of natural and glass fiber composites shows that a net saving of 50 000 MJ (3 ton CO₂ emissions) per ton of thermoplastic can be achieved by replacing 30% glass fiber reinforcement with 65% hemp fiber. It is further estimated that 3.07 million ton CO₂ emissions (4.3% of total USA industrial emissions) and 1.19 million m³ crude oil (1.0% of total Canadian oil consumption) can be saved by substituting 50% fiber glass plastics with natural fiber composites in North American auto applications. However, to compete with glass fiber effectively, further research is needed to improve natural fiber processing, interfacial bonding and control moisture sensitivity in longer run.