The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

基于智能优化算法的河流水质模型参数的优化简

为探索河流水质模型参数新的求解方法,根据有限的实测数据,分别应用免疫进化优化算法和免疫进化优选的捕食搜索算法,对河流水质模型计算公式中的多参数进行优化。将优化得到的计算公式用于国内外若干河流的河段中DO浓度值的拟合,并与实测结果进行了比较。结果表明,将免疫进化优化算法或免疫进化优选的捕食搜索算法优化得到的水质模型参数精度不仅较高,而且相对稳定,从而为河流水质模型参数的优化提供了一种新方法。     

鼠李糖脂洗脱氯丹和灭蚁灵污染场地土壤的工艺参数

优化了鼠李糖脂洗脱氯丹、灭蚁灵污染土壤的工艺条件,为开展有机氯农药污染场地土壤洗脱修复工程实践提供科学依据和技术参数。实验结果表明,随着洗脱剂———鼠李糖脂浓度的增加,氯丹和灭蚁灵的洗脱量呈现先增加后降低的趋势;洗脱时间和液固比对洗脱效果的影响趋势与浓度相同;在0~120 r/min范围内,氯丹和灭蚁灵洗脱量随着搅拌速度的增加而增大,80、120和200 r/min的洗脱量间差异不显著;单次洗脱量随洗脱次数的增加而降低,累计洗脱量则逐渐增大。综上所述,氯丹、灭蚁灵污染场地土壤鼠李糖脂洗脱的适宜工艺参数为鼠李糖浓度10 mmol/L,搅拌速度80 r/min,固液比1∶10,洗脱时间20 min,洗脱3次。     

苏南某市河流水质参数时空变异性研究

以苏南某市区320km2内的河流为研究对象,基于对高锰酸盐指数、NH3-N、TP3个主要水质参数的监测,应用地质统计学的变差函数球状模型和Kriging插值法,对河流有机污染指标、富营养化指标进行了空间插值,用以揭示其时空分布特征及变化趋势,并绘制了时空分布等值线图。结果表明,受不同区域污染物来源的差异、不同河道自身条件的差异和不同水期水生植物、入流水量、河水流动性的差异等因素的影响,研究区河流水质参数呈现出不同的时空变异特征;各水质参数污染均相当严重,尤以富营养化指标氮磷最为显著。     

振动试验中主要参数的计算推导及应用

振动试验中用到较多的参数,本文结合正弦和随机振动中的主要参数进行推导计算并举例,提供实际工程应用中的理论基础支持。     

可旋转径向式微粒捕集器消声特性影响因素灰色关联分析

为降低可旋转径向式微粒捕集器中的排气噪声,采用有限元法建立可旋转径向式微粒捕集器声学特性模型,分析得到了其消声特性和传递损失曲线,并采用灰色关联分析方法研究可旋转径向式微粒捕集器结构参数对消声特性的影响程度。结果表明,可旋转径向式微粒捕集器具有降噪能力,且对高频噪声消声效果明显好于低频噪声,平均消声量为20 dB左右;直径比和扩张管锥角是影响可旋转径向式微粒捕集器消声特性的2个主要因素,适当选用小的直径比和扩张管锥角,有利于提高可旋转径向式微粒捕集器的消声性能。     

美国某给水厂处理工艺及净水效果

介绍了美国某给水厂的臭氧-生物活性炭深度处理工艺、主要构筑物、设计参数和运行效果。实验结果表明:原水中TSS、BOD5、COD、UV254和浊度平均值分别为18.25 mg/L、5 mg/L、7.34 mg/L、0.08和17.38 NTU,经过系统处理后的出水指标分别为1.33 mg/L、2 mg/L、0 mg/L、0.01和0.86 NTU,相应的平均去除率分别为88%、60%、100%、88%和81%。净水效果明显,五项常规指标均满足我国《生活饮用水卫生标准》(GB5749-2006)使用要求,这种深度处理技术及设计思路值得国内给水处理行业参考借鉴。     

棉秆基活性炭的制备及其对2,4-二硝基苯酚的吸附

以棉秆为原料,以KOH为活化剂,制备了高比表面棉秆基生物质活性炭。分析了制得的活性炭的元素组成、表面官能团、吸附能力等物化性能,探讨了浸渍比,活化温度,活化时间等工艺参数对制备活性炭得率、表面官能团、碘值、亚甲基蓝值等性能的影响,并通过静态吸附实验比较了不同条件下制备活性炭对2,4-二硝基苯酚的吸附性能,探讨了典型炭样品对2,4-二硝基苯酚的等温吸附特性。结果表明,KOH活化棉秆基生物质活性炭的表面物化性质随浸渍比、活化温度等工艺参数变化而变化,活化适宜条件为浸渍比1：3、活化温度800℃、活化时间90 min,在此条件下制得的炭样的碘值为1 251 mg/g,亚甲基蓝吸附值为478 mg/g,分别是国家一级品标准的1.25倍与3.54倍;对2,4-二硝基苯酚的Langmuir最大吸附量为747 mg/g,与Freundlich模型相比,Langmuir模型能较好地描述2,4-二硝基苯酚在炭样上的吸附行为,表明制备活性炭样品表面吸附位的能量分布较为均一。     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles.The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance.There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman’s correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier.