吸附法油气回收系统在成品油库中的应用

介绍了活性炭吸附法油气回收系统在成品油库汽油装车过程中的应用情况。结合油库油气回收改造的实际情况,重点介绍了了吸附法油气回收装置的工艺流程、油库油气回收系统的组成、监控系统主要功能、环保检测的相关事项,并分析了油气回收系统的经济效益,结合实际经验对油库油气回收改造提出了建议。     

酸性水汽提及硫磺回收工艺的研究及应用研究

文章主要通过对酸性水气体及硫磺回收工艺特点的介绍与比选,着重分析“无在线炉硫磺回收及尾气处理工艺”（SSR）,其中硫回收为一段高温转化,二级催化转化的克劳斯工艺,尾气处理为加氢还原一吸收工艺,并介绍原辅材料成分及处理效率。该工艺能够有效解决石化企业的酸性气及酸水排放问题,具有良好的社会、环境效益显著。     

乡镇垃圾综合利用途径分析研究

社会主义新农村建设推动了乡镇经济的发展,但乡镇的环境问题并没有随之解决,而固体废弃物的综合利用成为解决当前乡镇环境问题的有效手段之一。乡镇垃圾现状分析表明,其组分以有机易腐成分为主．不适用于城市垃圾的处理方式。乡镇垃圾经合理分类,其综合利用的主要途径有三条,包括可回收垃圾一回收一循环再利用,有机垃圾制肥-肥料-回田,餐厨垃圾、人畜粪便、秸秆等有机垃圾厌氧发酵-沼气-热能或电能。该途径可最终实现乡镇垃圾的资源化和能源化。     

广东省电子废物回收处理体系建设对策研究

广东省的电子废物产生量大,亟须建立规范的回收处理处置体系,实现资源的有序回收利用,避免电子废物的不当拆解处理造成环境污染。针对广东省电子废物回收处理的现状和存在问题,提出建设规模化的集中处理体系,产业化的回收利用体系和规范化的统一监管体系的相关对策,以促进电子废物的无害化、减量化和资源化处理处置。     

吸附法油气回收装置中真空泵的安装与调试

简要介绍了济南分公司油气回收装置、真空泵的工作原理以及安装与调试应注意的问题.     

Seven suppositions about energy security in the United States

Changing the patterns of energy use requires investigating how energy consumers - not experts - conceive of energy challenges. This article explores the varying beliefs, attitudes, and views on energy security in the United States among experts and residents. Based primarily on an academic literature review to distill expert views, and a survey distributed to hundreds of residents in the U.S. to capture consumer views, the study begins by explaining its methodology before identifying seven suppositions related to energy security. These suppositions involve security of fuel supply, energy democracy, energy research and development, affordability of energy services, environmental pollution, and climate change adaptation and mitigation. The second section of the study tests these suppositions with a survey distributed to 427 respondents in the United States. Three suppositions are supported, two are unsupported, and two are neither supported nor unsupported. The final section of the study offers implications for U.S. energy policy and scholarship.     

Antimicrobial activity of thin metallic silver flakes, waste products of a manufacturing process

The aim of the research was to develop new products and processes from a manufacturing waste from an Italian metallurgic company. The company produced thin silver metallic films and the production scraps were silver flakes. The possibility to use the silver flakes in water disinfection processes was studied. The antimicrobial activity of the flakes was investigated in batch using Escherichia coli as Gram-negative microorganism model. The flakes did not show any antimicrobial activity, so they were activated with two different processes: thermal activation in reducing atmosphere and chemical activation, obtaining, respectively, reduced flakes (RF) and chemical flakes (CF). The flakes, activated with either treatment, showed antimicrobial activity against E. coli. The kill rate was dependent on the type of activated flakes. The chemical flakes were more efficient than reduced flakes. The kill rate determined for 1 g of CF, 1.0 ± 0.2 min⁻¹, was greater than the kill rate determined for 1 g of RF, 0.069 ± 0.004 min⁻¹. This was confirmed also by the minimum inhibitory concentration values. It was demonstrated that the antimicrobial capability was dependent on flakes amount and on the type of aqueous medium. Furthermore, the flakes maintained their properties also when used a second time. Finally, the antimicrobial activities of flakes were tested in an effluent of a wastewater treatment plant where a variety of heterotrophic bacteria were present.     

诱导结晶磷回收技术处理低浓度含磷废水研究

诱导结晶技术是近年发展的新型废水处理技术。采用自设计的诱导结晶反应器,反应器形式与Phosnix相似,但结构相对简单,无Phosnix反应器的内外同心筒结构,并增加了过渡区。研究了HRT、[PO43-]、[Ca2+]/[PO43-]对诱导结晶处理低浓度含磷废水的影响规律,并以实验室双泥系统厌氧上清液为原水,考察了结晶反应器长期运行效果。研究表明,在一定范围增加HRT、[PO43-]或[Ca2+]/[PO43-]均可提高磷酸盐去除率,但超过一定数值后,再继续增加对提高磷酸盐去除效果的贡献很小,[PO43-]或[Ca2+]/[PO43-]过高还会导致均相结晶出现,使磷酸盐去除率下降;研究给出了一定条件下的最佳HRT、[PO43-]或[Ca2+]/[PO43-];运行效果试验表明,诱导结晶反应器在进水平均磷酸盐浓度仅为23.6 mg/L的情况下,磷酸盐的平均去除率仍可达到55.2%,该技术在处理低浓度含磷水方面较具应用前景。     

Vibrational energy loss analysis in battery tab ultrasonic welding

In ultrasonic metal welding processes, high-frequency ultrasonic energy is used to generate friction and heat at the interface between weld parts to produce solid-state bonds. It has been observed that sufficient energy is required to produce proper bonding, while excessive energy can cause such quality issues as weld fracture and perforation. Therefore, it is important to have a product/process design in ultrasonic welding to ensure efficient energy conversion from ultrasonics to welding energy, minimizing energy loss in the process. In this work, vibrational energy loss associated with the longitudinal and flexural vibrations of the Cu coupon during ultrasonic welding is studied by applying one-dimensional continuous vibration models. To facilitate our modeling, experimental results from the free response of Cu coupon were obtained to determine the damping characteristics of the Cu coupon in the welding process. Our analysis shows that substantial energy loss can occur during welding due to the flexural vibration of the Cu coupon, especially when the overhang (the upper part of the Cu coupon extended from the anvil) of the Cu coupon resonates at or close to the welding frequency (about 20 kHz), degrading the weld quality of battery tabs. This study contributes to understanding the fundamental dynamics of the Cu coupon during ultrasonic welding and its impact on weld quality.     

国内首个MW级分布式能源系统烟囱合理性分析

介绍了分布式能源系统的构成、运行特点及技术发展情况,研究了国内首个MW级分布式供能系统工程的烟囱高度和形式,预测和分析了项目大气污染物对环境的影响,证明了该项目烟囱选择的合理性,为下阶段国内分布式能源系统烟囱选型奠定技术基础。