Transaction costs and the clean development mechanism

The emissions trading provisions of the Kyoto Protocol and its clean development mechanism (CDM) are designed to permit greenhouse gas (GHG) emission reductions at the lowest cost globally. However, to ensure climate integrity, these reductions must pass through vigilant approval, monitoring and evaluation procedures that create additional transaction costs unrelated to the physical process of eliminating GHGs. Moreover, the CDM's additionality criterion creates constraints that magnify the influence of these transaction costs on project viability. If these costs are extreme, they could undermine the success of the CDM, and possibly of the Kyoto Protocol itself. This article describes the trading provisions of the treaty, creates a working definition of transaction costs, and discusses their effects. It then analyzes the process of creating a CDM project to identify the sources of transaction costs, illustrated by an example of a fuel substitution project in Ghana. The conditions for project profitability are analyzed and compared with recent GHG emission credit prices in Europe. The specific Ghanaian results are not generalizable to all CDM projects, but the model does suggest a template that can be used to analyze the effects of project and transaction costs in other contexts.     

Air quality nearby road traffic tunnel portals： BTEX monitoring

A monitoring campaign of BTEX （benzene, toluene, ethylbenzene, o- m- and p-xylene） was carried out nearby two tunnel portals in the urban area of Naples with the aim to verify air quality in this kind of urban sites. Sampling was carried out using the active adsorption technique. Sampling time was 1 h. Ambient temperature and traffic flow measurements were carried out during each sampling operation. The results indicate that average benzene concentrations at both sites exceed the limit value of 10 μg/Nm^3 established by the European Community （EC） （Dir. 2000/69）. Concentration levels of other BTEX are relatively high as well. A correlation between BTEX concentration and two wheeler vehicle flow was observed.     

Conserving international coastal habitat networks on migratory waterfowl flyways

Migratory waterfowl depend on habitat networks at local, national and international scales for their survival. Coastal habitats are key areas for many waterfowl. Different species use different biotopes and in different places, so overall many parts of the coastal resource are important. As well as national conservation efforts, waterfowl conservation is increasingly focussed worldwide on collaborative international conservation, catalysed by several measures e.g. the Ramsar Convention, the EC Conservation of Wild Birds Directive, and the Bonn Convention Agreement on the Conservation of African/Eurasian Migratory Waterbirds. Several international conservation plans are under development for single species, but a more effective approach may be to develop plans, for assemblages of migratory birds with similar habitat requirements. All such plans must incorporate future sustainable use of the habitats on which the birds depend. Yet migratory bird and coastal habitat conservation is still often approached separately, despite the two being now closely linked to the development of the Natura 2000 site network in the European Community. Implementing the 1992 EC Habitats Directive requires the selection of coastal habitat sites for designation, set in national and international contexts of resource distribution. International coastal habitat inventories are needed to underpin this process. Combining such inventories with assessment of the flyway habitat requirements of waterfowl species and assemblages offers great potential for identifying international coastal habitat networks that meet the objectives of both habitat and migratory waterfowl conservation.     

Effects of Natura 2000 on nontarget bird and butterfly species based on citizen science data

The European Union's Natura 2000 (N2000) is among the largest international networks of protected areas. One of its aims is to secure the status of a predetermined set of (targeted) bird and butterfly species. However, nontarget species may also benefit from N2000. We evaluated how the terrestrial component of this network affects the abundance of nontargeted, more common bird and butterfly species based on data from long-term volunteer-based monitoring programs in 9602 sites for birds and 2001 sites for butterflies. In almost half of the 155 bird species assessed, and particularly among woodland specialists, abundance increased (slope estimates ranged from 0.101 [SD 0.042] to 3.51 [SD 1.30]) as the proportion of landscape covered by N2000 sites increased. This positive relationship existed for 27 of the 104 butterfly species (estimates ranged from 0.382 [SD 0.163] to 4.28 [SD 0.768]), although most butterflies were generalists. For most species, when land-cover covariates were accounted for these positive relationships were not evident, meaning land cover may be a determinant of positive effects of the N2000 network. The increase in abundance as N2000 coverage increased correlated with the specialization index for birds, but not for butterflies. Although the N2000 network supports high abundance of a large spectrum of species, the low number of specialist butterflies with a positive association with the N2000 network shows the need to improve the habitat quality of N2000 sites that could harbor open-land butterfly specialists. For a better understanding of the processes involved, we advocate for standardized collection of data at N2000 sites.     

欧盟城市饮用水供应链风险管理与评价及其借鉴

结合欧盟2006年起开展的TECHNEAU(Technology Enabled Universal Access to Safe Water)项目,介绍了欧盟城市"从水源到用户的饮用水供应链"风险管理机制,以及"风险识别、评估、减缓和控制"综合风险评价框架;并从水源地、水处理系统、配水系统、历史风险事件、风险评价方法、评价结果6方面比较了捷克、德国、荷兰、挪威、瑞典5个国家典型城市风险评价实践,着重分析了瑞典哥特堡市风险评价中采用的综合概率故障树法和客户损失时间指数方法及其应用价值。总结了欧盟饮用水供应链的风险管理在全过程管理策略、"关口前移"管理方针、多样性的风险评价方法与技术、参与主体多元化、评价结果公开透明5个方面的成功做法和经验,可供国内参考。     

中欧环境空气臭氧评价对比与启示

欧盟臭氧(O₃)监测与评价起步相对较早。对比中国和欧盟O₃例行评价,欧盟在O₃标准限值、保护对象、评价指标、评价时间尺度、参评点位类型的设定和选取,以及O₃浓度与前体物排放量的关联性分析等方面,均对中国O₃评价具有一定的借鉴意义。以2017—2020年石家庄市8个国控站点O₃观测数据为分析案例,采用欧盟常用的日最大8 h滑动平均浓度(MDA8)第4高值,以及O₃暴露指标SOMO35和AOT40等3项评价指标,开展了尝试性评价应用和浓度对比。对照欧盟O₃评价指标应用经验,未来可考虑从兼顾两类功能区、丰富评价指标、扩展参评点位类型、纳入暴露影响评估、关联前体物排放变化等方面,进一步完善中国环境空气O₃评价方式,以更好地发挥其对空气质量精细化管理的数据支撑作用。     

The Power of Bioenergy‐Related Standards to Protect Biodiversity

Abstract: The sustainable production of bioenergy is vital to avoiding negative impacts on environmental goods such as climate, soil, water, and especially biodiversity. We propose three key issues that should be addressed in any biodiversity risk‐mitigation strategy: conservation of areas of significant biodiversity value; mitigation of negative effects related to indirect land‐use change; and promotion of agricultural practices with few negative impacts on biodiversity. Focusing on biodiversity concerns, we compared principles and criteria set to address biodiversity and other environmental and social issues in seven standards (defined here as commodity‐based standards or roundtables, or relevant European legislation): five voluntary initiatives related to bioenergy feedstocks, the Renewable Transport Fuel Obligation (United Kingdom), and the European Renewable Energy Source Directive. Conservation of areas of significant biodiversity value was fairly well covered by these standards. Nevertheless, mitigation of negative impacts related to indirect land‐use change was underrepresented. Although the EU directive, with its bonus system for the use of degraded land and a subquota system for noncrop biofuels, offered the most robust standards to mitigate potential negative effects, all of the standards fell short in promoting agricultural practices with low negative impacts on biodiversity. We strongly recommend that each standard be benchmarked against related standards, as we have done here, and that efforts should be made to strengthen the elements that are weak or missing. This would be a significant step toward achieving a bioenergy industry that safeguards Earth's living heritage.     

Consumer Autonomy and Sufficiency of GMF Labeling

Individuals’ food choices are intimately connected to their self-images and world views. Some dietary choices adopted by consumers pose restrictions on their use of genetically modified food (GMF). It is quite generally agreed that some kind of labeling is necessary for respecting consumers’ autonomy of choice regarding GMF. In this paper, we ask whether the current practice of mandatory labeling of GMF products in the European Union is a sufficient administrative procedure for respecting consumers’ autonomy. Three issues concerning this question are discussed. First, we argue that labeling needs to be accompanied by relevant and understandable information on genetic modification, genetically modified food, and the European practice of GMF labeling. Second, we claim that this type of informing makes it less likely that consumers start to avoid GMF products just because labels make them suspicious of the products. It is further noted that even though some consumers may react to labels this way, labels do not restrict their autonomy of choice. Third, a need for more precise labels indicating the source of the transferred gene is considered. It is found out that such labels are not morally necessary when also non-GMF products are available and no relevant differences (such as differences in price and healthiness) exist between them and GMF products. However, in some other cases more precise labels may be needed for respecting consumers’ autonomy of choice.     

Distributed generation by energy from waste technology: A life cycle perspective

Municipal Solid Waste in general and its organic fraction in particular is a potential renewable and non-seasonal resource. In this work, a life cycle assessment has been performed to evaluate the environmental impacts of two future scenarios using biogas produced from the organic fraction of municipal solid waste (OFMSW) to supply energy to a group of dwellings, respectively comprising distributed generation using solid oxide fuel cell (SOFC) micro-CHP systems and condensing boilers. The London Borough of Greenwich is taken as the reference case study. The system is designed to assess how much energy demand can be met and what is the best way to use the digestible waste for distributed energy purposes.The system is compared with two alternative scenarios fuelled by natural gas: a reference scenario, where the electricity is supplied by the grid and the heat is supplied from condensing boilers, and a fuel cell micro-CHP system. The results show that, although OFMSW alone can only supply between 1% and 4% of the total energy demand of the Borough, a saving of ∼130 tonnes of CO₂ eq per year per dwelling equipped with micro-CHP is still achievable compared with the reference scenario. This is primarily due to the surplus electricity produced by the fuel cell when the micro-CHP unit is operated to meet the heat demand. Use of biogas to produce heat only is therefore a less desirable option compared with combined heat and power production. Further investigation is required to identify locally available feedstock other than OFMSW in order to increase the proportion of energy demand that can be met in this way.     

Trends of SO2emission in the European union, 1985–1997

The trends of yearly emission of sulphur dioxide are analysed for the European Union during a period of time from 1985 to 1997. To achieve the above matter the method of the least squares model has been used. Major SO₂emissions were found in Germany, the United Kingdom, Spain, Italy and France. However, high SO₂emissions by km²were found in Germany, the United Kingdom and Belgium. The most remarkable results of the trend analysis appears as follows: 12 countries with significant downward trends, 2 countries with significant upward trends and 1 country with no significant trend. A decreasing trend is evident for the most part of the E.U., although Portugal and Greece generated significant increasing trends of SO₂emission for the mentioned year period.