胭脂红酸分光光度法测定废水中硼

用胭脂红酸分光光度法测定废水中的硼,着重进行了方法的条件和干扰试验。方法检测限为0.063mg/L,线性范围为0.21mg/L-1.25mg/L。5个实验室对5.00mg/L硼标准样品测得重复性相对标准差为3．4％,再次性相对标准差为3．6％;相对误差为－0．8％－1．4％,回收率在95．2％－104．6％之间。     

青岛市降水中的铅及其变化规律

对青岛市四个站位 1 997年 1 1月～ 1 998年 1 0月 33次降水中铅浓度进行了监测 ,降水中铅浓度在 <0 .5～2 7.7μg/ L之间 ,均值为 4 .2μg/ L,降雪高于降雨。讨论了 p H、交通和季节对铅浓度变化的影响 ,并与其它城市地区降水中铅进行了比较     

硫氰酸盐-抗坏血酸体系流动注射光度法测定水中钼

建立了水中钼的硫氰酸盐一抗坏血酸体系流动注射分光光度测定法,优化了试验条件。方法在0mg／L～16mg／L范围内线性关系良好,检出限为0．19mg／L,废水样品测定的RSD≤I．6％,加标回收率为96．3％～104％,与国家标准方法的测定结果一致。     

环境水系统中氯氟烃替代品降解产物TFA的测定

三氟乙酸为氯氟烃替代品的降解产物,对植物和土壤微生物群落的生长有一定抑制作用.建立测定TFA质量浓度的实验方法,将样品中的三氟乙酸与甲醇在硫酸溶液中衍生化为三氟乙酸甲酯(MTFA),利用三氟乙酸甲酯的易挥发性,以顶空进样进行富集浓缩.使用质谱定性手段确定出峰时间,再通过电子捕捉检测器ECD对实际样品进行分析.仪器检测限为30μg/L,方法检出限约为30ng/L,加标回收率60%～90%.     

高压密闭消解土壤砷、汞、铅、镉酸体系比较

采用高压密闭消解系统消解土壤,氢化物发生-原子荧光光谱法(HG-AFS)测定As和Hg,石墨炉原子吸收光度法(GF-AAS)测定Pb和Cd,对比了不同消解酸体系对国家土壤标准参考样中As、Hg、Pb、Cd的消解效果。结果表明,盐酸-硝酸体系对As、Hg、Pb和Cd的消解平均回收率分别为26.1%、100.6%、69.7%、87.3%;硝酸-高氯酸-氢氟酸体系中As、Hg、Pb和Cd消解平均回收率分别为109.9%、84.7%、87.5%、90.1%;硝酸-双氧水体系对Hg、Pb、Cd消解平均回收率分别为104.8%、95.1%、93.3%,对As的回收率虽只有69.2%,但数据精密度最好。此外,从简化试验步骤,减少误差,提高检测效率及减少试验危险性等方面综合评价,认为硝酸-双氧水消解体系是采用高压密闭系统消解土壤重金属的最理想酸体系。     

离子色谱法测定丙烯酸丁酯生产废水中丙烯酸和对甲基苯磺酸

建立了用离子色谱法测定丙烯酸丁酯生产废水中丙烯酸和对甲基苯磺酸的新方法。采用IonPac AS11-HC阴离子色谱柱,淋洗液为30mmol/L的NaOH淋洗液,流速1ml/min,抑制电流75mA。丙烯酸根的检测下限为0.44mg/L(峰面积)、0.46mg/L(峰高),保留时间、峰高、峰面积的变异系数分别为0.03%、0.50%、0.50%,峰高、峰面积的线性回归系数R分别为0.9929、0.9954。对甲基苯磺酸根的检测下限为0.49mg/L(峰面积)、0.48mg/L(峰高),保留时间、峰高、峰面积的变异系数分别为0.02%、0.48%、0.47%,峰高、峰面积的线性回归系数R分别为0.9990、0.9998。常规无机阴离子对丙烯酸、对甲基苯磺酸的测定没有干扰。对实际废水样品进行分析,丙烯酸、对甲基苯磺酸的回收率分别为101.6%～104.4%、95.4%～96.8%。方法简便、灵敏、可靠。     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.     

吸收液pH值对锌合金白烟处理效果的影响

为了治理同时含有气态和粒状污染物的锌合金白烟,采用填料塔对其进行洗涤和吸收,考察了吸收液的pH值以及喷淋密度对锌合金白烟处理效果的影响,并根据碱洗和酸洗的特点,考察了碱酸两级处理的效果.结果显示,吸收液的喷淋密度与氯化铵烟尘、氯化氢和氨的处理效率成正比.吸收液的pH值也会影响白烟的处理效果,主要是通过吸收液与污染物之间的化学反应来进行,碱洗时氯化铵烟尘和氯化氢获得了较高的处理效率,但碱洗过程有氨生成,限制其应用;酸洗对氨的处理效率较高,但氯化铵烟尘和氯化氢的处理效率都比较低,达不到国家排放标准.尽管对锌白烟的处理效果还不理想,但试验结果对于锌白烟的治理具有重要的参考价值和指导意义.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

不同物质对垃圾渗滤液中腐殖酸的吸附研究

垃圾渗滤液是一种有毒有害的高浓度有机废水,其中含大量腐殖酸。腐殖酸具有离子交换能力、吸附能力和脱除杂质能力,因此在很多方面有实用价值。活性碳、土壤、堆肥对废水中的有机物有一定的吸附能力。本文采用正交设计的方法,研究了活性碳、土壤、堆肥在不同温度,液／固,腐殖酸初始浓度的条件下对垃圾渗滤液中腐殖酸的吸附效果。实验结果表明：四种实验因素对吸附剂的吸附能力的影响程度为：吸附剂类型〉腐殖酸的初始浓度〉吸附反应温度〉液固比。在温度为25℃,液固比为50／0．5（mL/g）,腐殖酸初始浓度为41．99（mg／L）,吸附剂类型为活性碳时,腐殖酸吸附量最大,为40．86mg。同时分析了响应指标随因素的变化趋势。