街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.     

丙烯腈含量的测定改进

总结了常用测定丙烯腈原料含量方法存在的不足，提出了以１００减去水分和有机杂质的方法来确定丙烯腈含量。并对瓣老测定方法进行对比验证，结果表明，改进的方法操作简单，数据准确，可行。     

evaluation of a measurement method for forest vegetation in a large-scale ecological survey

We evaluate a field method for determining species richness andcanopy cover of vascular plants for the Forest Health MonitoringProgram (FHM), an ecological survey of U.S. forests. Measurementsare taken within 12 1-m² quadrats on 1/15 ha plots in FHM.Species richness and cover are determined for four height classes(strata) within each quadrat and aggregated by stratum over the entireplot. We estimated (1) the agreement between experienced trainers andinexperienced technicians who collected the data on this survey(accuracy) and (2) the agreement among the technicians (precision) forresults on species richness and cover from 3 test plots at 3 timeintervals. The methods appear to be highly precise, although somediscrepancies with the values obtained by the trainers were found.Trainers found significantly more species in the ground stratum (0–0.6 m) and measured significantly more cover in the uppermost stratum(>4.9 m). The proportion of variation due to measurement error andtemporal variability was less than 13% for species richness (all strata)and cover (all but one stratum). This indicates that the method issuitable for monitoring changes in species richness and canopy coverfor a large-scale synoptic monitoring project such as FHM.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

夜间建筑施工噪声扰民监测方法探讨

以一家夜间施工工地为例 ,通过对现有夜间建筑施工噪声测量方法及国家和深圳经济特区有关噪声污染定义的分析 ,阐述了夜间施工工地噪声扰民监测方法     

Elevated atmospheric deposition and dynamics of mercury in a remote upland forest of southwestern China

Mt. Gongga area in southwest China was impacted by Hg emissions from industrial activities and coal combustion, and annual means of atmospheric TGM and PHg concentrations at a regional background station were 3.98 ng m⁻³ and 30.7 pg m⁻³, respectively. This work presents a mass balance study of Hg in an upland forest in this area. Atmospheric deposition was highly elevated in the study area, with the annual mean THg deposition flux of 92.5 μg m⁻² yr⁻¹. Total deposition was dominated by dry deposition (71.8%), and wet deposition accounted for the remaining 28.2%. Forest was a large pool of atmospheric Hg, and nearly 76% of the atmospheric input was stored in forest soil. Volatilization and stream outflow were identified as the two major pathways for THg losses from the forest, which yielded mean output fluxes of 14.0 and 8.6 μg m⁻² yr⁻¹, respectively.     

热真空设备中与温度相关的试验技术探讨

以RZHM-1400-AB型热真空试验箱为实例,简述设备主要工作原理。强调其温度传递方式及航天产品在热真空试验中温度参数的重要性。以无数试验数据为依据,着重论证何种类型测温传感器与实际设备相匹配,同时论证选取何种外形的测温传感器为最佳温度测量工具。同时,进一步介绍几种在热真空试验中使用这些测温传感器的方法,以减少不必要的人为测量误差。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

锶盐废渣含硫状态分析及硫含量的测定

锶盐废渣中硫的状态及含量不同其作用大不相同,有的呈现活性导致膨胀破坏,而有的则表现为惰性,因此有必要了解硫的存在状态及含量。分析表明锶盐废渣中硫主要以硫酸盐硫(SO3)和硫化物硫(S2-)两种形式存在。选择硫酸钡重量法和碘量法进行化学测定,然后用X-射线能谱仪进行元素定性分析;并将化学分析和仪器测定两种方法进行对比。结果表明,X-射线能谱法可以快捷、方便地探测锶渣所含各种元素,但不能确定元素的价态;化学分析方法可得到相对准确的元素含量;用硫酸钡重量法和碘量法联合测定锶渣中的硫含量,与X-射线能谱法相比,偏差仅为0.37%。     

影像纹理窗口大小对山地阔叶林不同群落有效叶面积指数估测的影响

森林叶面积指数是陆地表面过程和地球系统气候模型的基本参数,更是森林结构的关键参数之一,已广泛应用于辐射、植物光合作用和降雨截流估测等方面。论文以川西南山地阔叶林5种不同群落类型为研究对象,基于地面调查的112个20 m×20 m样地和SPOT 5数据,运用5种图像处理技术,包括光谱反射率、植被指数、影像单波段纹理、简单波段比纹理和主成分纹理,提取相应影像信息,建立多元回归模型估算有效叶面积指数（LAIe）。结果表明：光谱反射率、单波段纹理参数和植被指数对LAIe估测能力相对较低,利用植被指数仅获得实测LAIe约65%的精度（R²=0.65,RMSE=0.28 m²/m²）;更为有效的是运用所有比值处理的纹理特征参数值来估测LAIe,可获得实测LAIe约74%的变异（R² =0.74,RMSE=0.20 m²/m²）;改进最理想的是利用主成分处理建立的回归模型（R²=0.85,RMSE=0.10 m²/m²）。不同群落的LAIe估测,整体上相应地优于研究区结果,其中栲群落决定系数R²更是高达0.89（RMSE=0.07 m²/m²）。对于研究区阔叶林以窗口7×7、9×9比较成功,而各群落以窗口9×9较好。因此比值处理、主成分处理的纹理特征参数引入及高空间分辨率数据的使用,能显著提高LAIe估测精度。